Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 45.0 - 90.0 MPa @Temperature 60.0 - 150 °C |
6530 - 13100 psi @Temperature 140 - 302 °F |
Average value: 65.0 MPa Grade Count:1 |
Overview of materials for Polybutylene Terephthalate (PBT), 50% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), 50% Glass Fiber Filled". Specific grades with glass content between 45.. |
|||
Tensile Strength, Ultimate | 45.0 - 115 MPa | 6530 - 16700 psi | Average value: 71.4 MPa Grade Count:11 |
Overview of materials for PET + PBT Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "PET + PBT Unreinforced". Each property range of values reported is minimum and maximum values of appropr.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
PolyOne Lubri-Tech™ PS-000/20T Polyester (PBT) - 20% PTFE Lubricated
(discontinued **) Data provided by PolyOne. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Covestro Bayblend® FR 2000 Polycarbonate/ABS Blend
(discontinued **) Easy-flowing FR grade. Flame retardant grade with antimony, chlorine and bromine free, flame retardant package, optimized processability.Applications: Housings for office equipment, electrical engin.. |
|||
Tensile Strength, Ultimate | 45.0 - 135 MPa @Temperature 60.0 - 150 °C |
6530 - 19600 psi @Temperature 140 - 302 °F |
Average value: 86.3 MPa Grade Count:2 |
Overview of materials for Polyphenylene Sulfide (PPS) with 20% Carbon Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS) with 20% Carbon Fiber Filler". Specific grades with carbon fiber content bet.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Plenco 204 Black General Purpose Woodflour/Mineral Filled Phenolic Molding Compound
(discontinued **) Plaslok 204 is a two-stage, woodflour and mineral-filled phenolic molding compound formulated to accommodate a wide range of molding situations. In addition, it is recommended for use in thin wall .. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Plenco 5440 Black General Purpose Phenolic Molding Compound
(discontinued **) Plaslok 5440 is the replacement material for the former Union Carbide BMRS-5440. It is a two-stage, phenolic molding compound that has been successfully formulated to accommodate a very wide range .. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Plenco 7000 Black General Purpose Woodflour Filled Phenolic Molding Compound
(discontinued **) Plaslok 7000 is the replacement material for the former Union Carbide BMM-7000. It is a two-stage, woodflour-filled phenolic molding compound having versatile molding and preheating characteristics.. |
|||
Tensile Strength, Ultimate | 45.0 - 269.585 MPa @Temperature -40.0 - 150 °C |
6530 - 39100.1 psi @Temperature -40.0 - 302 °F |
Average value: 101 MPa Grade Count:9 |
Overview of materials for Nylon 66, 40% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 40% Glass Fiber Filled". Specific grades with glass content between 35% and 44% are included. .. |
|||
Tensile Strength, Ultimate | 45.0 - 165 MPa | 6530 - 24000 psi | Average value: 81.1 MPa Grade Count:32 |
Overview of materials for Nylon 66, 30% Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 30% Mineral Filled". Specific grades with primary filler content between 25% and 34% are inclu.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
KKPC Kuhmo GP 125EI General Purpose GPPS Key features: For phonograph, good profile properties. Common Uses: CD-CASE, THIN-WALLGPPS has excellent transparence, colorability, electric property, water-resistance, harmlessness, molding proces.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | |
Kraton® G1657 + PA-6,6 blend (12/8/80) Blending KRATON D and G polymers with PA significantly improves the toughness at both room and low temperatures. KRATON polymers are block segments of styrene and rubber monomers (A-B, A-B-A, or [A.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | |
Kraton® G1657 + PA-6,6 blend (8/12/80) Blending KRATON D and G polymers with PA significantly improves the toughness at both room and low temperatures. KRATON polymers are block segments of styrene and rubber monomers (A-B, A-B-A, or [A.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Sumitomo Bakelite Durez® 25378 Phenolic, Compression Grade Durez 25378 Black Phenolic is a two stage heat resistant/electrical grade molding material having an excellent molded finish, low shrinkage and good heat resistance. Durez 25378 has exceptional UL .. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ISO 37 |
Lubrizol ESTANE® 58887 Ether Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ISO 37 |
Lubrizol ESTANE® GP92AT Ether Based Thermoplastic Polyurethane Type: Estane® GP 92AT is an aromatic polyether-based thermoplastic polyurethane (TPU).Appearance: Translucent spherical pelletsUses: Injection molding partsAvailable in EuropeInformation provided b.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ISO 527-1, 2 |
Polyplastics Duranex® 601SA Polybutylene Terephthalate (PBT), Low density, Low wear, Mineral filled DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Covestro Bayblend® FR 90 Polycarbonate/ABS Blend Flame retardant grade with antimony, chlorine and bromine free, flame retardant package, good light stability.Applications: Housings for business machines.Information provided by Bayer.As of 1 Septe.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ATSM D638 |
Ashley Polymers Ashlene® F242 ABS Flame retardant.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 45.0 - 45.0 MPa @Temperature 136 - 136 °C |
6530 - 6530 psi @Temperature 277 - 277 °F |
Average value: 53.1 MPa Grade Count:1 |
Overview of materials for Thermoplastic Polyurethane (TPUR), Polyester Grade This property data is a summary of similar materials in the MatWeb database for the category "Thermoplastic Polyurethane (TPUR), Polyester Grade". Each property range of values reported is minimum a.. |
|||
Tensile Strength, Ultimate | 45.0 - 45.0 MPa @Time 605000 - 605000 sec |
6530 - 6530 psi @Time 168 - 168 hour |
Average value: 53.1 MPa Grade Count:1 |
Overview of materials for Thermoplastic Polyurethane (TPUR), Polyester Grade This property data is a summary of similar materials in the MatWeb database for the category "Thermoplastic Polyurethane (TPUR), Polyester Grade". Each property range of values reported is minimum a.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Plaslok 7000 Black General Purpose Woodflour Filled Phenolic Molding Compound
(discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 7000 is the replacement material for .. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Plaslok 504 Black (COM) Heat Resistant Mineral/Cellulose Filled Phenolic Molding Compound
(discontinued **)&l Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 504 is a two-stage, mineral and cellu.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Plaslok 306 Black General Purpose Mineral/Flock Filled Phenolic Molding Compound
(discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use. Plaslok 306 is a two-stage, mineral and flock.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Adell HI-10 Impact Modified PBT |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Covestro Bayblend® FR 90 Polycarbonate + ABS Blend, Flame-Retardant
(discontinued **) Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Covestro Bayblend® FR 2010 Polycarbonate/ABS Blend
(discontinued **) Easy-flowing FR grade. Flame retardant grade with antimony, chlorine and bromine free, flame retardant package, optimized processability.Applications: Housings for office equipment, electrical engin.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
KKPC Kuhmo GP 125 General Purpose GPPS Key features: Good-fluidity, general purpose. Common Uses: Common kitchenware, toys, general merchandise, cosmetic containers, dust covers.GPPS has excellent transparence, colorability, electric pro.. |
|||
Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
Plaslok 501 Black Electrical Grade Mineral/Flock Filled Phenolic Molding Compound
(discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 501 is a two-stage, mineral and flock.. |