Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ISO 527 |
Polimeri Europa Riblene® MP 31 Low Density Polyethylene - Injection Molding Riblene MP 31 is a medium fluidity low density polyethylene resin (LDPE), with added slip agent.Parts made by Riblene MP 31 are characterized by a medium rigidity.Main Applications: Riblene MP 31 i.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ISO 527 |
Polimeri Europa Riblene® MP 31 R Low Density Polyethylene - Injection Molding Riblene MP 31 R is a medium fluidity low density polyethylene resin (LDPE), with added slip agent.Parts made by Riblene MP 31 R are characterized by a medium rigidity.Main Applications: Riblene MP .. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D412 |
Precision Polymer Engineering V70Q Fluoroelastomer Compound Black, Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. ASTM designation = FKM. ISO designation = FPM. Formulated using only those ingredients determi.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D 638 |
NOVA Chemicals Novapol® LM-0724-A LDPE Injection Molding Resin LM-0724-A complies with the U.S. FDA specifications for olefin polymers and may be used in the U.S. as an article or component of an article intended for use in contact with food. It is also biolog.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TN 7006 LDPE - Coextruded Film The Trithene® TS 7006 resin is a low-density polyethylene (LDPE) with high molecular weight and very good clarity. The unique combination of good processability, bubble stability, gloss, and streng.. |
|||
Tensile Strength, Yield | 12.0 - 307 MPa | 1740 - 44500 psi | Average value: 154 MPa Grade Count:81 |
Overview of materials for Polyphthalamide (PPA) This property data is a summary of similar materials in the MatWeb database for the category "Polyphthalamide". Each property range of values reported is minimum and maximum values of appropriate Ma.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 50% Elongation; ASTM D412 |
Covestro Texin® 5250 Thermoplastic Polyurethane, Polyether-based, Medical
(discontinued **) This grade is in chemical compliance with 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber articles intended for repeated use) subject to the limitations of this regulation and any other r.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 100% Elongation; ASTM D412 |
Covestro Texin® DP7-1157 Thermoplastic Polyurethane + ABS Blend
(discontinued **) Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 1550A Polyethylene
(discontinued **) Injection molding gradeUnless otherwise noted, all tests are run at 23°C and 50% RH. Where required, samples are compression molded per ASTM D1928.Information from manufacturer data sheet.Eastman .. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 1550P Polyethylene
(discontinued **) Injection molding gradeUnless otherwise noted, all tests are run at 23°C and 50% RH. Where required, samples are compression molded per ASTM D1928.Information from manufacturer data sheet.Eastman .. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE5030 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Good draw down, low neck-in, good heat sealability and adhesion, low smoking, and excellent printabilityApplications: Extrusion: coating grade and general coa.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE5032 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Excellent draw down, low neck-in, excellent heat sealability, good adhesion, low smoking, no edge weave, and excellent printability.Applications: Extrusion: c.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TX 3003 LDPE - Shrink Wrap Film The Trithene® TX 3003 resin is a low-density polyethylene (LDPE) with high molecular weight, presenting excellent mechanical properties. The product provided elevated gloss and transparency, adding.. |
|||
Tensile Strength, Yield | 12.0 - 15.0 MPa | 1740 - 2180 psi | ASTM D638 |
Manifattura Cattaneo PTFE Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | AVG Stress at Elongation M100; ASTM D412 Method A |
Seals Eastern 7148 Fluorocarbon-Elastomer FKM specially for oil & gas service; ED resistantInformation provided by Seals Eastern, Inc. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | |
Trelleborg B739 Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 50 mm/min |
Eastman Ecdel PCCE 9965 Copolyester Ether Elastomer ISO data as provided by the manufacturer, Eastman Chemical |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 2 in/min, Type IV bar; ASTM D638 |
Chevron Phillips Marlex® K203 LLDPE Sheet Extrusion Resin Type: Hexene CopolymerCharacteristics: Outstanding ESCRBroad fusion rangeExcellent melt strengthGood processabilityExcellent flexibilityImproved output and texturingApplications: Coextruded ca.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | Across Flow; ASTM D638 |
ExxonMobil Santoprene® 103-50 Thermoplastic Elastomer A hard, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range .. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | Across Flow; ASTM D638 |
ExxonMobil Santoprene® 203-50 Thermoplastic Elastomer A hard, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Braskem IC32 LLDPE Injection Molding Polyethylene Copolymer IC32 is a linear low-density polyethylene, narrow molecular weight butene-1 copolymer produced by the solution process for injection molding. It offers good fluidity, excellent flexibility and tenac.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Braskem LD5000A LDPE Blow Molding Polyethylene LD5000A is a low-density polyethylene with good mechanical properties, good ESCR, and excellent sealing characteristics. It does not contain additives. It is used in general purpose blow molded arti.. |
|||
Tensile Strength, Yield | 12.0 MPa @Temperature 120 °C |
1740 psi @Temperature 248 °F |
ISO Data |
BASF Ultramid® 8254 HS BK-102 PA6 (Dry) Ultramid 8254 HS is a highly flexible, heat stabilized, impact modified nylon 6 extrusion grade for tubing applications. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Braskem EG0921 LDPE Blow Molding Polyethylene EG0921 is a low-density polyethylene with good mechanical properties and environmental stress cracking resistance (ESCR) and excellent sealability. It is used in blow molded parts and medium-resista.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Braskem ML2400N LLDPE Injection Molding Polyethylene The resin ML2400N is a linear low-density polyethylene, 1-butene based, with good flexibility and low warpage. It does not contain a slip agent. It does have narrow molecular weight distribution. Th.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE2051 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Very good molding processability, produces parts with good stiffness, and shows excellent flatness in large projected areas. Also recommended for multi-cavit.. |
|||
Tensile Strength, Yield | 12.0 MPa @Strain 50.0 % |
1740 psi @Strain 50.0 % |
|
Covestro Texin® 255 Urethane Thermoplastic Elastomer Key Features:UnfilledSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adop.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | Stress at 50% Strain |
Covestro Desmopan® 453 Urethane Thermoplastic Elastomer
(discontinued **) Key Features:UnfilledSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially .. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | |
BASF Novolen® 2900 NC Polypropylene Injection molded partsData was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Yield | 12.0 - 117 MPa @Temperature -40.0 - 120 °C |
1740 - 17000 psi @Temperature -40.0 - 248 °F |
Average value: 56.9 MPa Grade Count:8 |
Overview of materials for Nylon 6, Impact Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Impact Grade". Each property range of values reported is minimum and maximum values of appropri.. |