Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D412 |
Multibase TPSiV™ 3011-60A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ISO 527 |
Polimeri Europa Riblene® GM 20 R Low Density Polyethylene - Coating Grade Riblene GM 20 R is a medium fluidity low density polyethylene resin (LDPE).Main Applications: Riblene GM 20 R is suitable for coating applications where a low neck-in is required. Moreover, for it.. |
|||
Tensile Strength at Break | <= 12.0 MPa | <= 1740 psi | ISO/R527 |
Polykemi AB POLYelast TPE Z800 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® SX 7012 LDPE - Blow Molding The Trithene SX 7012 resin is a low density polyethylene (LDPE) with medium molecular weight which allows the production of flasks with an adequate combination of mechanical and impact strength, fle.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TS 9022 MDPE - Overwrap Packaging The Trithene TS 9022 resin is a medium-density polyethylene (MDPE) with good optical properties, excellent stiffness and processability, that warrants the production of thin films with good appearan.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | IEC 60811 |
Solvay Specialty Polymers Cogegum® GFR/340-HP Polyolefin, Unspecified
(Unverified Data**) Cogegum® XLPO-HFFR - Crosslinkable Halogen Free Fire Retardant compound Silane grafted compound moisture curable by addition of a catalyst masterbatch (Sioplas® method). It consists of a polyolefi.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | 500 mm/min; ASTM D638 |
Eastman 1840A Polyethylene
(discontinued **) Polyethylene 1840A is a low-density formulation with no slip or antiblock. It is suggested for injection molding applications requiring good stiffness, gloss, good processability or layflat properti.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | Extruded wire; ASTM D412 |
DuPont Elvax® 40L-08 Low Smoke Non-Halogen Jacket Formulation
(discontinued **) Elvax® 40L-08 low smoke non-halogen jackets.Information provided by DuPont. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® CX 8087 MDPE - Cast Film The Trithene CX 8087 resin is a medium density polyethylene (MDPE) with medium molecular weight that presents excellent balance between mechanical properties, processability and stiffness, allowing .. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TS 8064 LDPE - Packaging Film The Trithene TS 8064 resin is a low-density polyethylene (LDPE) with a medium molecular weight an excellent processability. Furthermore, this product has good mechanical properties, average transpar.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL WCD801A PPE-TPE (Europe-Africa-Middle East) Flexible, migration-improved, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics SABIC PPCOMPOUND 8620A PP SABIC® PPcompound 8620A is a mineral filled, impact modified polypropylene TPO. It was originally designed for painted automotive bumper fascia applications where a combination of good flow, hig.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP 9H1100C LNP* Thermocomp* 9H1100C is a High Specific Gravity compound containing proprietary fillers. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | 500 mm/min; ASTM D638 Type IV Specimen |
Westlake EMAC® SP2255 17% Ethylene-Methyl Acrylate Copolymer Westlake EMAC® SP2255 is a 17% EMA copolymer containing slip and antiblock. This resin is designed for blown or cast film, tie-layers, and extrusions where flexibility, compatibility, or low heat s.. |
|||
Tensile Strength at Break | >= 12.0 MPa | >= 1740 psi | 50 mm/min; ISO 527 |
Fainplast Compounds Ethylplus 600 Polyethylene Cable Compound Polyethelene, halogen-free cable compound with superior thermo-mechanical properties, outstanding heat resistance, and high electrical propertiesSolid LDPEInformation provided by Fainplast Compounds.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ISO R 527 |
Fainplast Compounds GS 65/T Flexible PVC, Injection Molding for Footwear Crystal soles and sandals |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ISO R 527 |
Fainplast Compounds GS 7303 Flexible PVC, Injection Molding for Footwear Soles |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ISO R 527 |
Fainplast Compounds GSK 78/3 Flexible PVC, Injection Molding, Lead Free Plugs DOP free |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ISO R 527 |
Fainplast Compounds GS 8202 Flexible PVC, Injection Molding for Footwear Soles |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ISO R 527 |
Fainplast Compounds PK 71/FR Flexible PVC, Lead Free Spiral pipes |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0437C10L Calcium Reinforced |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0437C10L1 Calcium Reinforced |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Azdel SuperLite® SL550700-100 PP Resin Matrix / 55% Glass Fiber (3 mm Molded Thickness) AZDEL SuperLite® SL550700-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Azdel SuperLite® SL552000-100 PP Resin Matrix / 55% Glass Fiber (8 mm Molded Thickness) AZDEL SuperLite® SL552000-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic.. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | |
AorTech Biomaterials Elast-Eon™ E5-130 Biomedical Polyurethane Pellets Elast-Eon™ polymers are used in biomedical applications. They have high biostability so they can be used for long term implantation. |
|||
Tensile Strength at Break | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TS 7035 LDPE - Film - Lamination and Plastification The Trithene TS 7035 resin is a low-density polyethylene (LDPE) with an excellent processability, which allows for a low energy consumption during extrusion and warrants the production of thin films.. |