Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 13.8 MPa | 2000 psi | Mixed 1:2; TM R050-36 |
Resinlab® EP1215 Clear Unfilled Epoxy Structural Adhesive Resinlab™ EP1215 Clear is a two part unfilled epoxy structural adhesive designed for bonding applications requiring high strength and good impact resistance. It cures completely at room temperature.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | 510 mm/min From extruded tape 3:1 drawdown ratio. Values are largely determined by processing parameters.; ASTM D412 |
PolyOne Maxxam™ FR WC 0521-48 R1 RoHS Polypropylene, Unspecified (PP, Unspecified) Maxxam FR WC 0521-48 R1 RoHS is a RoHS compliant flame retardant polyolefin compound characterized by low smoke development and good processability. Designed for thin-wall extrusion applications.UL .. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R130AE White 41 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible XV3684 Polyvinyl Chloride, Flexible (PVC, Flexible) All ingredients used in the formulation of this compound are listed in the United States FDA Code of Federal Regulations, Title 21. The only restriction is that the plasticizer is For foods of high .. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
LyondellBasell Purell® PE3220D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrusion Blow Molding Purell PE 3220 D is a low density polyethylene with high rigidity and good chemical resistance. It is delivered in pellet form. Target markets are packaging of pharmaceuticals in the small blow mold.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
Manifattura Cattaneo RULON® 641 Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
Manifattura Cattaneo RULON® J Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | 2 in/min; ASTM D638 |
Ineos H12G-01 Polypropylene Homopolymer Grade H12G-01 is a general purpose homopolymer. This material meets the requirements of the US Food and Drug Administration as specified in 21 CFR 177.1520 for use in food-contact applications for f.. |
|||
Tensile Strength at Break | 13.8 - 17.2 MPa | 2000 - 2500 psi | |
ITW Plexus Plexusâ„¢ MA1021 Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.All purpose, low shrinkage.Information provided by Illinois Tool Works. |
|||
Tensile Strength at Break | 13.8 - 17.2 MPa | 2000 - 2500 psi | |
ITW Plexus Plexusâ„¢ MA3940 Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.Use with craze sensitive plastics.Information provided by Illinois Tool Works. |
|||
Tensile Strength at Break | 13.8 - 17.2 MPa | 2000 - 2500 psi | |
ITW Plexus Plexusâ„¢ MA425 Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.All purpose adhesive, long open time.Information provided by Illinois Tool Works. |
|||
Tensile Strength at Break | >= 13.8 MPa | >= 2000 psi | ASTM D412 Method A |
Seals Eastern 5488 Nitrile Rubber Low temperature service Nitrile; plasticizer freeInformation provided by Seals Eastern, Inc. |
|||
Tensile Strength at Break | >= 13.8 MPa | >= 2000 psi | ASTM D412 Method A |
Seals Eastern 7148 Fluorocarbon-Elastomer FKM specially for oil & gas service; ED resistantInformation provided by Seals Eastern, Inc. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
Teknor Apex APEX® 3610-70 Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: First Generation SeriesInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
Teknor Apex APEX® 3700-70NT1 Polyvinyl Chloride, Flexible Features: DEHP Plasticizer; Ethylene Oxide Sterilizable; High Heat Resistance Uses: Medical/Healthcare Applications Processing Method: Extrusion Forms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
Teknor Apex HFFR 2005PC Polyolefin, Halogen Free RoHS Compliant Features: Flame Retardant; Halogen Free Uses: Communication Wire Jacketing; Electronic Cable Jacketing; Security Cable JacketingAgency Ratings: IEC Unspecified Rating; ICEA Unspecifie.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D412 |
Teknor Apex MF 150 NT Polyvinyl Chloride, Flexible Film Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Film, Medical Applications Forms-PelletsAppearance-ClearInformation provided by Teknor Apex Company |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
Teknor Apex APEX® 65015 Polyvinyl Chloride, Flexible Notes: 75°C Jacket; RoHS Compliant Uses: Wire and Cable ApplicationsForms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D412 |
Teknor Apex Telcar® TL-86-K986-A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Automotive Spec.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
ExxonMobil HDPE HD 9830.02 High Density Polyethylene Resin Product Description: HD 9830.02 is a blow molding grade high density polyethylene copolymer with a bimodal molecular weight distribution. It provides a very good balance of stress crack resistance, .. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
Bayshore Vinyl Compounds BVC 6200-85 Vinyl Compound BVC 6200-85 is an economy grade flexible vinyl formulation designed for easy processing and excellent heat stability. This material will process at high rates with low temperatures and produces a s.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FE 5520 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5520 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FE 5522 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5522 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FE 5840Q Fluoroelastomer Composition: Terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethyleneRecommended alternative for Dyneon FX 9038Process targets: compression, injection and transfer moldingPropr.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM-D882 |
Caplinq LINQSTAT™ VCF-42424B Product Description: LINQSTAT™ VCF-Series is a black, carbon-filled, volume-conductive polyethylene film designed to provide both physical and static protection in numerous semiconductor, electroni.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 504E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an extrusion grade olefinic thermoplastic elastomer suitable for profile extrusion or blow molding. Characteristics of this product include excellent low temperature.. |
|||
Tensile Strength at Break | 13.8 MPa | 2000 psi | ASTM-D882 |
Caplinq LINQSTAT™ VCF-40054V/m Product Description: LINQSTAT™ VCF-Series is a black, carbon-filled, volume-conductive polyethylene film designed to provide both physical and static protection in numerous semiconductor, electroni.. |