Polymer Property : Tensile Strength at Break = 1450 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	10.0 MPa	1450 psi	ISO 527
Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene Flexirene MT 40 A is a linear low density polyethylene (LLDPE), with antioxidants, suitable for injection molding application.Flexirene MT 40 A is characterized by a good processability and impact r..
Tensile Strength at Break	10.0 MPa	1450 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible MG23B Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	10.0 MPa	1450 psi	ASTM D638
Braskem BI 818 LDPE Injection Molding Polyethylene (discontinued **) Applications: Injection molding; masterbatches. Information provided by Braskem
Tensile Strength at Break	10.0 MPa	1450 psi	ASTM D 638
LyondellBasell Hifaxâ„¢ CA260GC Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ CA260GC White fractional melt flow, 40 MPa flexural modulus, UV-stabilized, precolored thermoplastic elastomeric olefin (TEO) resin has an excellent balance of flexibility,..
Tensile Strength at Break	10.0 MPa	1450 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL WCD835 PPE-TPE Flexible, low odor, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements. 80C end..
Tensile Strength at Break	10.0 MPa	1450 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL WCP821 PPE-TPE (Asia Pacific) Flexible Noryl* injection molding grade. Low specific gravity with very good non-halogenated flame retardant performance. Developed for evaluation in over-molding applications such as plugs, strain ..
Tensile Strength at Break	10.0 MPa	1450 psi
Shin-Etsu Silicones SV-57000U High Strength Silicone Elastomer SV57000U is one of a series of silicone bases designed for applications requiring high strength.. Product Features: Excellent mechanical properties.Typical Applications: Molding and Extrusion applic..
Tensile Strength at Break	10.0 MPa	1450 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL WCD835 PPE-TPE (Europe-Africa-Middle East) Flexible, low odor, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements. 80C end..
Tensile Strength at Break	10.0 MPa	1450 psi	at max load; ASTM D638
A. Schulman CP775-01 Molding Grade, Low Density Polyethylene DescriptionCp 755-01 is a molding grade, low-density polyethylene. ApplicationCP 755-01 meets the specification contained in FDA Regulation 177.1520 for food contact applications.Information provid..
Tensile Strength at Break	10.0 MPa	1450 psi	500 mm/min; ASTM D638 - ISO 527-2
DuPont Elvaloy® 3717 AC Ethylene and 17% Butyl Acrylate Copolymer Elvaloy® 3717 AC can be used for coextrusion, compounding and injection molding. In coextrusion, it can be used to improve sealing; in compounding, to improve low temperature and impact properties..
Tensile Strength at Break	10.0 MPa	1450 psi	500mm/min; ASTM D638 Type IV Specimen
Westlake EMAC® Plus SP1358 21.5% Ethylene-Methyl Acrylate Copolymer Westlake EMAC® Plus SP1358 is a 21.5% EMA copolymer containing slip and antiblock. This resin is designed for blown or cast film, tie-layers, and extrusions where flexibility, compatibility, or low..
Tensile Strength at Break	10.0 MPa	1450 psi	ASTM D638
ELASTO UK Dryflex® 502750S SEBS Based Material, Unfilled Qualities, 75A Hardness, Black The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Tensile Strength at Break	>= 10.0 MPa	>= 1450 psi	ISO R 527
Fainplast Compounds CKL 80/E Flexible PVC, Sheathing Lead Free Under sheathing
Tensile Strength at Break	>= 10.0 MPa	>= 1450 psi	ISO R 527
Fainplast Compounds CL 63/K Flexible PVC, Sheathing General purpose, opaque surface
Tensile Strength at Break	10.0 MPa	1450 psi	ISO R 527
Fainplast Compounds GS 69/F Flexible PVC, Injection Molding for Footwear Sandals
Tensile Strength at Break	10.0 MPa	1450 psi	ISO R 527
Fainplast Compounds PG 55/A Flexible PVC, Extrusion Modified with Rubber Gaskets modified with rubber
Tensile Strength at Break	10.0 MPa	1450 psi	ISO R 527
Fainplast Compounds PH 60 Flexible PVC, Transparent Extrusion Transparent profiles
Tensile Strength at Break	10.0 MPa	1450 psi	ISO R 527
Fainplast Compounds PM 5540 Flexible PVC, Extrusion Gaskets for frames
Tensile Strength at Break	10.0 MPa	1450 psi	ASTM D638
Azdel SuperLite® SL550700-100 PP Resin Matrix / 55% Glass Fiber (3.5 mm Molded Thickness) AZDEL SuperLite® SL550700-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic..
Tensile Strength at Break	10.0 MPa @Temperature 175 °C, Time 605000 sec	1450 psi @Temperature 347 °F, Time 168 hour	Accelerated Aging; MIL-I-23053/15A
3M BBI-A Shrinkable Tubing for Bus Bar 3M Heat Shrinkable Tubing for Bus Bar BBI-A Series is designed for insulating rectangular, square and round bus bar rated from 5 kV through 35 kV. It will also cover and insulate inline bolted conne..
Tensile Strength at Break	10.0 MPa	1450 psi	ASTM D638
Arkema Group EVATANE® 28-40 Copolymer Ethylene - Vinyl Acetate EVATANE® 28-40 is a random copolymer of Ethylene and Vinyl Acetate made by high-pressure radicalar polymerisation process. EVATANE® 28-40 is stabilized with antioxidants. The High Vinyl Acetate co..
Tensile Strength at Break	10.0 MPa	1450 psi	ISO R 527
Fainplast Compounds PK 5510 Flexible PVC, Lead Free Profiles
Tensile Strength at Break	>= 10.0 MPa	>= 1450 psi
Beijing Evergrow Resources PTFE, 20% Glass Fiber, 5% Graphite Filled Filled PTFE article is manufactured by molding method with filled PTFE resin. Filled PTFE resin is manufactured by compounding PTFE granular resin with fillers of many different kinds. Broadly speak..