Polymer Property : Charpy Impact, Notched = 2.62 ft-lb/in² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179
Nilit Nilamon B3 H7 GK 35 15% Glass Fiber, 25% Mineral Reinforced PA6 Description: Nilamon B3 H7 GK 35 provides a combination between low warpage and high stiffness, while retaining a good impact strength. It has a high heat aging resistance, so that it is suitable fo..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179-1/1eA
Quadrant EPP Ertalon® 6 SA PA 6, extruded (ISO Data) This material offers an optimal combination of mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These properties, together with good electrical insulatin..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179
PolyOne Edgetek® QT020GFS/000 FR NATURAL - OBSOLETE Syndiotactic Polystyrene (SPS) Information provided by PolyOne
Charpy Impact, Notched	0.550 J/cm² @Temperature 23.0 °C	2.62 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Borealis HB306MO Polypropylene HB306MO is a low melt-flow-rate polypropylene homopolymer intended for compression molding of caps and closures. This grade is designed for the caps and closures market and therefore contains a lubr..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	IS0179-1:2000
Zhejiang Juner JEPPB005 High Glossy PP Applications: Shell of Air ConditionerInformation provided by Zhejiang Juner New Materials Co, Ltd.
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179/1eA
DuPont Performance Polymers Rynite® 935 BK505 Polyethylene Terephthalate (PET) (Unverified Data**) 35% Glass Reinforced Polyethylene Terephthalate Rynite 935 BK505 is a 35% mica/glass reinforced modified polyethylene terephthalate resin with exceptionally low warpage excellent electrical properti..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	1eA; ISO 179
Azoty Tarnow™ TARNOFORM 300 M POM Tribological modified grade with addition of molybdenum disulphide, which causes decreased coefficient of friction and wear, especially for applications requiring high load at low sliding speed.Info..
Charpy Impact, Notched	0.550 J/cm² @Temperature -30.0 °C	2.62 ft-lb/in² @Temperature -22.0 °F	ISO 179
BASF Ultraform H 2320 006 Q600 POM Ultraform H2320 006 is a high-molecular-weight grade of POM for injection molding. It conforms to FDA requirements of 21 CFR 177.2470.
Charpy Impact, Notched	0.550 J/cm² @Temperature -30.0 °C	2.62 ft-lb/in² @Temperature -22.0 °F	ISO 179
BASF Ultraform H 4320 Q600 POM Ultraform H4320 Q600 is an extrusion POM high molecular weight grade. This grade enables high extrusion rates with thick-walled product. It also exhibits high thermal stability and a low tendency ..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179
BASF Ultramid® 1403-2 BK ND3007 PA66 (Dry)
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	Conditioned; ISO 179/IeA
Addiplast Addilene PMD 50271 Flame Retardant Polypropylene Flame retardant, high rigidityInformation provided by Addiplast.
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179 1eA
Azoty Tarnow™ Tarnamid® T-27 MTR Polyamide 6 - Transparent Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Transparent up to maximum 2.5 mm.Tarnamid® has the following main properties..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179/1eA
BASF Ultrason® S 3010 MR UN PSU Description: Unreinforced, higher viscosity injection molding and extrusion grade, tougher, with improved chemical resistance and demolding optimized. Abbreviated designation according to ISO 1043-1..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179/1eA
DuPont Performance Polymers Sorona® 3015G NC010 Polytrimethylene Terephthalate (PTT) (Unverified Data**)& 15% Glass Reinforced Polytrimethylene Terephthalate with Resin Made from Bio-PDO Sorona 3015G NC010 is a 15% glass reinforced PTT resin containing 31% renewably sourced ingredients by weight (37% ba..
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179/IeA
Addiplast Addinyl C2 V15 Nylon 66/6, 15% Glass Filled Glass fiber reinforced, high strengthInformation provided by Addiplast.
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179
BASF Ultraform S 1320 0021 UNC POM Ultraform S1320 0021 UNC is an easy flowing, rapidly freezing injection molding POM grade with enhanced stiffness and heat distortion resistance. It is highly stabilized to resist aggressive fuels,..