Polymer Property : Melt Flow = 0.60 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 °C	0.60 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
RheTech Products T12P600-01BG 12% Talc Reinforced Polypropylene Copolymer, General Purpose Black, Blow Molding Grade Applications: Flipper panelClose out panelSeat backsLoad floorInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 °C	0.60 g/10 min @Load 4.76 lb, Temperature 446 °F	Procedure A Condition L; ASTM D1238
Network Polymers NPP 30-007W Description: Homopolymer PolypropyleneInformation provided by Network Polymers Inc.
Melt Flow	0.60 g/10 min @Load 21.6 kg, Temperature 190 °C	0.60 g/10 min @Load 47.6 lb, Temperature 374 °F	ISO 1133
Premix Thermoplastics PRE-ELEC® PE 1296 Conductive Thermoplastic Compound PRE-ELEC® PE 1296 is a conductive thermoplastic masterbatch/compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PE 1296 has a high concentration o..
Melt Flow	0.60 g/10 min @Load 3.80 kg, Temperature 200 °C	0.60 g/10 min @Load 8.38 lb, Temperature 392 °F	ASTM D 1238
SABIC Innovative Plastics Geloy FXTW30PE ASA Pearlescent GELOY ASA resin with copper-look for capstock extrusion. Outstanding weatherability.This data was supplied by SABIC-IP for the Americas region.
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 °C	0.60 g/10 min @Load 4.76 lb, Temperature 446 °F	Condition L; ASTM D1238
NOVA Chemicals Dylark® 238P20 High Performance Glass Filled Styrenic Very high modulus, High heat resistance, Excellent flow characteristics, Excellent adhesion to urethaneApplications: Instrument panel substrates, consoles, Cluster housing, interior trimInjection Sp..
Melt Flow	0.60 g/10 min	0.60 g/10 min	I<sub>2</sub>; ASTM D1238
Petromont 8001 High Density Polyethylene Resin Pétromont HDPE 8001 is a high density, homopolymer polyethylene resin produced using the UNIPOL® Process. This high strength resin is intended for extrusion on cast line, where excellent processab..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
Polimeri Europa Clearflex® FF 106 Hexene Copolymer Linear Low Density Polyethylene Clearflex FF 106 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for blown film extrusion.Films manufactured with Clearflex FF 106 are characterized by ..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 °C	0.60 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
Solvay Engineered Polymers DEXFLEX® E756 TPO (discontinued **) Description: DEXFLEX® E756 thermoplastic olefinic elastomer (TPO) is designed for extruded automotive air-bag covers. This material provides excellent rigidity, durability and low-temperature toug..
Melt Flow	0.60 g/10 min @Load 3.80 kg, Temperature 200 °C	0.60 g/10 min @Load 8.38 lb, Temperature 392 °F	ASTM D 1238
SABIC Innovative Plastics Geloy FXTW30CP ASA Pearlescent GELOY ASA resin with copper-look for capstock extrusion. Outstanding weatherability.This data was supplied by SABIC-IP for the Americas region.
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 Â°C	0.60 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238
Ineos T00G-00 Polypropylene Impact Copolymer This is a fractional MFR polypropylene impact copolymer designed for the roofing membrane market. Its blend of impact resistance and flexural modulus is designed to provide an excellent balance bet..
Melt Flow	0.60 - 0.90 g/10 min @Load 2.16 kg, Temperature 190 Â°C	0.60 - 0.90 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238-00
Ipiranga Petrochem LB 0117 LLDP IPQ produces Linear Low Density Polyethylene (LLDPE) for use by plastics molding industry segments that employ extrusion processes in the manufacturing of films destined for producing bobbins and ba..
Melt Flow	0.60 - 0.90 g/10 min @Load 2.16 kg, Temperature 190 Â°C	0.60 - 0.90 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238-00
Ipiranga Petrochem LB 0120 BP LLDP IPQ produces Linear Low Density Polyethylene (LLDPE) for use by plastics molding industry segments that employ extrusion processes in the manufacturing of films destined for producing bobbins and ba..
Melt Flow	0.60 - 0.90 g/10 min @Load 2.16 kg, Temperature 190 Â°C	0.60 - 0.90 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238-00
Ipiranga Petrochem LBH 0117 LLDP IPQ produces Linear Low Density Polyethylene (LLDPE) for use by plastics molding industry segments that employ extrusion processes in the manufacturing of films destined for producing bobbins and ba..
Melt Flow	0.60 - 0.90 g/10 min @Load 2.16 kg, Temperature 190 Â°C	0.60 - 0.90 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238-00
Ipiranga Petrochem LBH 0120 BPS LLDP IPQ produces Linear Low Density Polyethylene (LLDPE) for use by plastics molding industry segments that employ extrusion processes in the manufacturing of films destined for producing bobbins and ba..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 Â°C	0.60 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238
Iran Petrochemical (PCC) 12XF6 Linear Low Density Polyethylene 12XF6 is a high performance LLDPE (HP-LLDPE) blown film grade for high film strength applications.Information provided by Iran Petrochemical Commercial Co.
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 Â°C	0.60 g/10 min @Load 4.76 lb, Temperature 446 Â°F	Condition L; ISO 1133
LyondellBasell Adflexâ„¢ Q 100 F Polyolefin Description: Adflexâ„¢ Q 100 F is a thermoplastic polyolefin which has been developed for the extrusion of blown film, it is also suitable for sheet extrusion. Adflexâ„¢ Q 100 F features a ver..
Melt Flow	0.60 g/10 min	0.60 g/10 min	ISO 1133
Solvay Specialty Polymers PolidanÂ® T/A-SP Polyethylene, Crosslinked (XLPE) POLIDANÂ® T/A-SP is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction. It is used for flexible crosslinkable pipes.Featu..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
Borealis Casico™ FR6083 Reduced Fire Hazard Jacketing Compound Casico™ FR6083 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilized, natural jacketing compound combining with excellent extrusion properties. The composition is based o..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
Borealis VL4470 High Density Polyethylene VL4470 is a high density polyethylene. Applications: Blown film, Rashel knitted and woven fabrics, and Stretch tape.Information provided by Borealis AG
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
Westlake EF602 Low Density Polyethylene Westlake EF602 is a fractional melt LDPE with excellent toughness. It is suggested in heavy duty films and shipping sacks, and in industrial shrink applications. It can be used as a bubble stabilize..
Melt Flow	0.60 g/10 min	0.60 g/10 min	ASTM D1238
Westlake Hifor Xtreme SC74836 Linear Low Density Polyethylene WESTLAKE HIFOR Xtreme Polyethylene SC74836 is a high strength linear low density polyethylene designed for blown film extrusion. This resin contains no slip, no antiblock and processing aid. Films..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
ExxonMobil LDPE LD 157CW Blown Low Density Polyethylene Resin Product Description: LD 157CW offer good mechanical properties as well as excellent opticals.Availability: Africa & Middle East and Europe Additive: Antiblock: NoSlip: NoThermal Stabilizer: YesAppl..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
ExxonMobil LDPE LD 364HE Low Density Polyethylene Resin Product Description: LD 364HE is an LDPE, offering a good combination of mechanical, optical and sealing properties.Availability: Africa & Middle East and Europe Additive: Antiblock: 1500 ppmSlip: ..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM-D1238
Braskem TS7006 LDPE Blown Film Extrusion Polyethylene TS7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a combination of mechanical, optical, and stiffness properties. TS7006 has a l..
Melt Flow	0.60 g/10 min @Load 3.80 kg, Temperature 230 °C	0.60 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238
PlastxWorld CEVIAN®-V 400N ABS Heat Resistant ABSThese are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc.
Melt Flow	0.60 - 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 - 0.80 g/10 min @Load 4.76 lb, Temperature 374 °F
Breplast Bretene TS COR HF Dark High Density Polyethylene Recovered polyethylene compositeInformation provided by Breplast S.p.A.
Melt Flow	0.60 - 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 - 0.80 g/10 min @Load 4.76 lb, Temperature 374 °F
Breplast Bretene TS COR HF Film Dark High Density Polyethylene Recovered polyethylene compositeInformation provided by Breplast S.p.A.
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 °C	0.60 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
Solvay Engineered Polymers SEQUEL® E2200 TPO (discontinued **) Description: SEQUEL® E2200 thermoplastic olefinic elastomer (TPO) is designed for thermoformed exterior and interior applications that require low-temperature toughness and high rigidity. This pro..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238 - ISO 1133
DuPont Elvaloy® 1126 AC Ethylene and 25% Methyl Acrylate Copolymer (discontinued **) Elvaloy® 1126 AC is intended for coextrusion and molding. It can be recommended for blow molding of parts requiring permanent flexibility, stress cracking resistance and softness. Excellent fill..
Melt Flow	0.60 g/10 min @Load 2.16 kg, Temperature 230 °C	0.60 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM-D1238
Braskem CP 743 HECO Polypropylene Heterophasic Copolymer CP 743 is a low melt flow rate heterophasic copolymer. It has broad molecular weight distribution and a general purpose additive package. CP 743 presents high melt strength, good processability, and..