Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Viscosity = 500000 cP Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Viscosity 500000 cP
500000 cP
Part A, RVT, #7, 2.5 rpm; TM R050-12
Resinlab® EP1121-4 Adhesive / Casting Resin
Resinlab™ EP1121-4 is a highly filled, high viscosity black adhesive / casting resin designed for applications requiring a high degree of thermal conductivity, flexibility, and a low CTE. It gives ..
Viscosity 500000 cP

@Shear Rate 250 1/s,
Temperature 230 °C
500000 cP

@Shear Rate 250 1/s,
Temperature 446 °F
Noltex Soarnol® D2908 Ethylene Vinyl Alcohol Copolymer
Ethylene content 29 mol%. Volatile matter 0.3%.The gas barrier property of Soarnol is about forty times better than that of nylon, therefore, Soarnol allows design of lower cost packages by using a..
Viscosity 500000 cP
500000 cP
RVT, #7, 2.5 rpm; TM R050-12
Resinlab® EP1325 Thixotropic, Heat Curing Epoxy Adhesive
Resinlab™ EP1325 and EP1325LV are one part thixotropic, heat curing epoxy adhesives. They can also be used as a small mass potting compounds, staking or damming adhesives, or polymer systems where ..
Viscosity 500000 cP
500000 cP
RVT, #7, 2.5 rpm; TM R050-12
Resinlab® EP1330 Heat Cure Epoxy Polymer System
Resinlab™ EP1330 and EP1330LV are one part heat cure epoxy polymer systems. They can also be used as a small mass potting or staking compounds, or a dam adhesive in and “dam and fill” application..
Viscosity 500000 cP

@Shear Rate 1000 1/s,
Temperature 400 °C
500000 cP

@Shear Rate 1000 1/s,
Temperature 752 °F
Melt; ASTM D3835
Solvay Specialty Polymers AvaSpire® AV-848 Polyaryletherketone (PAEK)  (Unverified Data**)
AvaSpire® AV-848 is a high-temperature, polyaryletherketone (PAEK) that offers several key performance advantages over comparable grades of PEEK above 150°C, including better dimensional stability..
Viscosity 500000 cP

@Temperature 400 °C
500000 cP

@Temperature 752 °F
Melt; ISO 11443
Victrex® PEEK 600G Polyetheretherketone  (discontinued **)
Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low viscosity, FDA food conta..
Viscosity 500000 cP

@Temperature 400 °C
500000 cP

@Temperature 752 °F
melt; ISO 11443
Victrex® PEEK 650P PolyEtherEtherKetone
High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, coarse powder for extrusion compounding, low flow, FDA food contact compliant, color natural.Info..
Viscosity 500000 cP

@Shear Rate 50.0 1/s,
Temperature 190 °C
500000 cP

@Shear Rate 50.0 1/s,
Temperature 374 °F
estimated from log-log graph
DuPont Bynel® 3120 Acid-/Acrylate-Modified EVA Adhesive Resin  (discontinued **)
Bynel® Series 3100 resins are acid/acrylate-modified ethylene vinyl acetate polymers. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to proce..
Viscosity 500000 cP

@Shear Rate 50.0 1/s,
Temperature 190 °C
500000 cP

@Shear Rate 50.0 1/s,
Temperature 374 °F
DuPont Bynel® E326 Acid-/Acrylate-Modified EVA Adhesive Resin  (discontinued **)
Bynel® Series 3100 resins are acid/acrylate-modified ethylene vinyl acetate polymers. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to proce..
Viscosity 500000 cP
500000 cP
Melt Viscosity; ASTM D3835
Solvay Specialty Polymers AvaSpire® AV-848 Polyaryletherketone (PAEK)
AvaSpire® AV-848 is a high-temperature, polyaryletherketone (PAEK) that offers several key performance advantages over comparable grades of PEEK above 150°C, including better dimensional stabi..
Viscosity 500000 cP
500000 cP
A
Shin-Etsu Silicones LIMSâ„¢ KE1950-35A/B Elastomer
Information Provided by Shin-Etsu Silicones of America, Inc.
Viscosity >= 500000 cP
>= 500000 cP
Part A, thixotropic
Master Bond EP76M-F Electrically Conductive, Two Part Epoxy
Description: Master Bond EP76M-F is a two component, nickel filled, electrically conductive epoxy system for high performance bonding, sealing, and coating formulated to cure at room temperature or ..
Viscosity 500000 cP
500000 cP
Mixed
Tra-Con Tra-Bond 724-14C Polyurethane Adhesive
TRA-BOND 724-14C premixed and frozen, polyurethane adhesive is designed for good adhesion, providing strong, resilient bonds to a wide variety of substrates, including aluminum, solder, nylon, mylar..
Viscosity 500000 cP
500000 cP
dynamic
Dow Corning 7-3105 PERTOLATUM HIP EMULSION
A concentrated emulsion of petrolatum (USP) that is designed to facilitate the rapid development of skin care formulations which contain this emollient. Typical applications include: suncare, body l..
Viscosity 500000 cP

@Temperature 160 °C
500000 cP

@Temperature 320 °F
2.16 kg load; ISO 1133
EMS-Griltech Griltex® 11A Copolyamide Hotmelt Adhesive (Apparel Interlinings)
Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
Viscosity 500000 cP

@Temperature 160 °C
500000 cP

@Temperature 320 °F
2.16 kg load; ISO 1133
EMS-Griltech Griltex® 11A Copolyamide Hotmelt Adhesive (Technical Applications)
Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
Viscosity 500000 cP

@Temperature 160 °C
500000 cP

@Temperature 320 °F
2.16 kg load; ISO 1133
EMS-Griltech Griltex® D 1556A Copolyamide Hotmelt Adhesive (Technical Applications)
Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
Viscosity 500000 cP

@Shear Rate 1.00 1/s,
Temperature 40.0 °C
500000 cP

@Shear Rate 1.00 1/s,
Temperature 104 °F
cone/plate
Dow BETAMATE™ 1496 V Epoxy
BETAMATE™ 1496 V is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excelle..
Viscosity 500000 cP
500000 cP
Mixed
Armstrong A-4/E Epoxy Adhesive
Is a heavy, non-metallic filled, gray paste epoxy that provides excellent thixotropic non-sag bond lines. It can be used for small volume casting applications.Information provided by Ellsworth Adhe..
Viscosity 500000 cP

@Shear Rate 300 1/s,
Temperature 190 °C
500000 cP

@Shear Rate 300 1/s,
Temperature 374 °F
ASTM D3835
Advanced Polymer Alloys Alcryn® 4670 NC Melt Processable Rubber
Alcryn melt-processable rubber (MPR) is a true rubber, based on a partially cross-linked, chlorinated olefin interpolymer alloy. Alcryn is designed for the manufacture of rubber parts with high prod..
Viscosity 500000 - 1.60e+6 cP

@Shear Rate 100 1/s,
Temperature 232 °C
500000 - 1.60e+6 cP

@Shear Rate 100 1/s,
Temperature 450 °F
Melt Viscosity; ASTM D3835
Arkema Group KYNAR FLEX® 2500-20 Polyvinylidene Fluoride Copolymer - Extrusion & Molding
Characteristics: Natural resin - translucent, off-white hemispheres. Highest flexibility. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical st..
Viscosity 500000 - 1.20e+6 cP

@Shear Rate 100 1/s,
Temperature 232 °C
500000 - 1.20e+6 cP

@Shear Rate 100 1/s,
Temperature 450 °F
Melt Viscosity; ASTM D3835
Arkema Group KYNAR FLEX® 2950-05 Polyvinylidene Fluoride Copolymer - Extrusion & Molding
Characteristics: Natural resin - translucent, off-white hemispheres. Very flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toug..
Viscosity 500000 - 1.20e+6 cP

@Shear Rate 100 1/s,
Temperature 232 °C
500000 - 1.20e+6 cP

@Shear Rate 100 1/s,
Temperature 450 °F
Melt Viscosity; ASTM D3835
Arkema Group KYNAR FLEX® 3120-15 Polyvinylidene Fluoride Copolymer - Extrusion & Molding
Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toughness..
Viscosity 500000 - 800000 cP

@Shear Rate 100 1/s,
Temperature 232 °C
500000 - 800000 cP

@Shear Rate 100 1/s,
Temperature 450 °F
Melt Viscosity; ASTM D3835
Arkema Group KYNAR® 9000 HD Polyvinylidene Fluoride - Injection Molding
Characteristics: Natural resin - translucent, off-white hemispheres. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeabili..
Viscosity 500000 - 1.20e+6 cP
500000 - 1.20e+6 cP
Thixotropic
Loctite® Gasket Eliminator® 504 Flange Sealant
Anaerobic GasketingLoctite® 504 Gap Filling Rigid Cure Gasket Eliminator® Flange SealantA single-component, instant low pressure seal that fills gaps to 0.030". Typical Use: Gap filling
Viscosity 500000 cP

@Temperature 180 °C
500000 cP

@Temperature 356 °F
Melt; Flowtester (100 kgf/cm², dimension of die 1 Φ mm x 10 mm)
Zeon Chemicals Quintac® 3433N SIS Block Polymer
Styrene Isoprene (SIS) Block Polymer. Information provided by Zeon Chemicals L.P.
Viscosity 500000 - 800000 cP

@Shear Rate 100 1/s,
Temperature 232 °C
500000 - 800000 cP

@Shear Rate 100 1/s,
Temperature 450 °F
Melt Viscosity; ASTM D3835
Arkema Group KYNAR FLEX® 2850 PC Polyvinylidene Fluoride Spray Coating Powder
Electrostatic sprayInformation provided by Arkema Inc.
Viscosity 500000 cP
500000 cP
Part A, RVT, #7, 2.5 rpm; TM R050-12
Resinlab® EP1305 Black Highly Toughened Urethane Modified Epoxy
Resinlab™ EP1305 Black is a highly toughened urethane modified epoxy designed for bonding PVC, metals, ceramics and other difficult to bond substrates. The system has a thixotropic non-sag viscosi..
Viscosity 500000 cP

@Shear Rate 50.0 1/s,
Temperature 190 °C
500000 cP

@Shear Rate 50.0 1/s,
Temperature 374 °F
DuPont Nucrel® 1207 Ethylene-Methacrylic Acid Copolymer Resin for Extrusion Coating/Laminating  (discontinued
12 wt% Methacrylic Acid.Nucrel® 1207 is an ethylene-methacrylic acid copolymer resin available for use in conventional extrusion coating, coextrusion coating, and extrusion laminating equipment des..
Copyright © lookpolymers.com All Rights Reserved