Solvay Specialty Polymers AvaSpire® AV-848 Polyaryletherketone (PAEK) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyketone
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers AvaSpire® AV-848 Polyaryletherketone (PAEK) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

AvaSpire® AV-848 is a high-temperature, polyaryletherketone (PAEK) that offers several key performance advantages over comparable grades of PEEK above 150°C, including better dimensional stability, lower CLTE from 150°C to 240°C, and lower modulus for greater flexibility at room temperature. - Natural: AvaSpire AV-848 NTInjection Notes: Back Pressure: MinimumInformation provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.32 g/cc	1.32 g/cc	ASTM D792
Water Absorption	0.50 % @Time 86400 sec	0.50 % @Time 24.0 hour	ASTM D570
Viscosity	500000 cP @Shear Rate 1000 1/s, Temperature 400 °C	500000 cP @Shear Rate 1000 1/s, Temperature 752 °F	Melt; ASTM D3835

Mechanical Properties	Metric	English	Comments
Tensile Strength	94.0 MPa	13600 psi	50 mm/min; ASTM D638
Elongation at Break	35 %	35 %	50 mm/min; ASTM D638
	75 %	75 %	5.1 mm/min; ASTM D638
Elongation at Yield	6.7 %	6.7 %	50 mm/min; ASTM D638
Tensile Modulus	3.10 GPa	450 ksi	50 mm/min; ASTM D638
Flexural Strength	134 MPa	19400 psi	ASTM D790
Flexural Modulus	3.30 GPa	479 ksi	ASTM D790
Compressive Strength	118 MPa	17100 psi	ASTM D695
Shear Strength	82.0 MPa	11900 psi	ASTM D732
Izod Impact, Notched	0.750 J/cm	1.41 ft-lb/in	ASTM D256
	NB	NB	ASTM D4812

Thermal Properties	Metric	English	Comments
Specific Heat Capacity	1.65 J/g-°C @Temperature 50.0 °C	0.394 BTU/lb-°F @Temperature 122 °F	DSC
	1.66 J/g-°C @Temperature 200 °C	0.397 BTU/lb-°F @Temperature 392 °F	DSC
Thermal Conductivity	0.220 W/m-K	1.53 BTU-in/hr-ft²-°F	ASTM E1530
Melting Point	340 °C	644 °F	Peak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	252 °C	486 °F	Annealed; ASTM D648
Glass Transition Temp, Tg	158 °C	316 °F	ASTM D3418

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.18 @Frequency 1.00e+6 Hz	3.18 @Frequency 1.00e+6 Hz	ASTM D150
	3.21 @Frequency 60.0 Hz	3.21 @Frequency 60.0 Hz	ASTM D150
	3.23 @Frequency 1000 Hz	3.23 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	180 kV/mm @Thickness 0.0500 mm	4570 kV/in @Thickness 0.00197 in	Amorphous Film; ASTM D149
Dissipation Factor	0.0010 @Frequency 1000 Hz	0.0010 @Frequency 1000 Hz	ASTM D150
	0.0020 @Frequency 60.0 Hz	0.0020 @Frequency 60.0 Hz	ASTM D150
	0.0060 @Frequency 1.00e+6 Hz	0.0060 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	366 °C	691 °F
Middle Barrel Temperature	371 °C	700 °F
Front Barrel Temperature	377 °C	711 °F
Nozzle Temperature	382 °C	720 °F
Melt Temperature	382 - 404 °C	720 - 759 °F
Mold Temperature	166 - 193 °C	331 - 379 °F
Drying Temperature	149 °C	300 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Appearance	Natural Color
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Ductile
	Fatigue Resistant
	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	Good Impact Resistance
	High Heat Resistance
Forms	Pellets
Generic	PAEK
Injection Rate	Fast
Processing Method	Extrusion Blow Molding
	Fiber (Spinning) Extrusion
	Film Extrusion
	Injection Blow Molding
	Injection Molding
	Machining
	Profile Extrusion
	Thermoforming
	Wire & Cable Extrusion
Screw Compression Ratio	2.0:1.0 to 3.0:1.0
Uses	Oil/Gas Applications
	Seals

Users viewing this material also viewed the following: