- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Shin-Etsu Silicones LIMSâ„¢ KE1950-35A/B Elastomer
Shin-Etsu Silicones LIMSâ„¢ KE1950-35A/B Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Shin-Etsu Silicones |
| Trade Name | LIMS™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Shin-Etsu Silicones LIMSâ„¢ KE1950-35A/B Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information Provided by Shin-Etsu Silicones of America, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.12 g/cc | 1.12 g/cc | |
| Viscosity | 500000 cP | 500000 cP | A |
| 500000 cP | 500000 cP | B | |
| Linear Mold Shrinkage | 0.022 cm/cm | 0.022 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 36 | 36 | |
| Tensile Strength | 9.80 MPa | 1420 psi | |
| Elongation at Yield | 700 % | 700 % | |
| 100% Modulus | 0.000745 GPa | 0.108 ksi | |
| Tear Strength | 30.0 kN/m | 171 pli | |
| Compression Set | 4.0 % @Temperature 200 °C, Time 14400 sec |
4.0 % @Temperature 392 °F, Time 4.00 hour |
|
| 36 % @Temperature 150 °C, Time 3600 sec |
36 % @Temperature 302 °F, Time 1.00 hour |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 5.00 min @Temperature 120 °C |
0.0833 hour @Temperature 248 °F |
Press Cure |
| 60.0 min @Temperature 150 °C |
1.00 hour @Temperature 302 °F |
Post Cure |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Translucent | |
| Cure Rate | 34 | T10 (302°F, ODR) |
| 40 | T90 (302°F, ODR) | |
| Regulatory Testing | Class VI, FDA |
Users viewing this material also viewed the following:
- Quadrant EPP Semitron® ESd 490HR Static dissipative PEEK for use in test fixtures. Non-sloughing and low moisture absorption. (ASTM Product Data Sheet)
- Lubriplate Bar & Chain Oil Specialty Oil and Fluid
- Lucent Polymers PC/PBT-0820 Polycarbonate+PBT, Injection Grade
- Teijin Panlite® G-3410R Glass Fiber Reinforced Polycarbonate Resin
- SABIC Innovative Plastics LNP THERMOCOMP PF005 PA 6 (Europe-Africa-Middle East)
- Carpenter Custom 630 (17-Cr-4Ni) Precipitation Hardening Stainless Steel, Condition H 900 (Age-Hardened 482°C/1hr/AC)
- Asia International Enterprise (Hong Kong) 60C4 Nylon 66
- 3M OFL0102 Outdoor UL Recognized Lexan Label Products
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR Atomite Whiting Filler
- Hexion Bakelite™ PF 2836 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage, UL Listed &nbs
Copyright © lookpolymers.com All Rights Reserved