- HOME
- POLYMER SEARCH
- Thermoplastic
- Acrylic (PMMA)
- Acrylic, Heat Resistant, Molded
- Sumitomo Chemical Sumipex® MH Acrylic Resin, Heat Resistant
Sumitomo Chemical Sumipex® MH Acrylic Resin, Heat Resistant
| Category | Polymer , Thermoplastic , Acrylic (PMMA) , Acrylic, Heat Resistant, Molded |
| Manufacturer | Sumitomo Chemical |
| Trade Name | Sumipex® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sumitomo Chemical Sumipex® MH Acrylic Resin, Heat Resistant.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Product CharacteristicsExtrusion GradeHeat ResistantInformation provided by Calsak Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0020 - 0.0060 cm/cm | 0.0020 - 0.0060 in/in | ASTM D955 |
| Melt Flow | 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C |
2.0 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 71.7 MPa | 10400 psi | ASTM D638 |
| Elongation at Yield | 13 % | 13 % | ASTM D638 |
| Tensile Modulus | 3.17 GPa | 460 ksi | ASTM D638 |
| Flexural Yield Strength | 120 MPa | 17400 psi | ASTM D790 |
| Izod Impact, Notched | 0.422 J/cm @Thickness 3.17 mm, Temperature 22.8 °C |
0.790 ft-lb/in @Thickness 0.125 in, Temperature 73.0 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 104 °C @Thickness 3.17 mm |
219 °F @Thickness 0.125 in |
annealed; ASTM D648 |
| Vicat Softening Point | 116 °C | 241 °F | ASTM D1525 |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.49 | 1.49 | ASTM D542 |
| Haze | 0.50 % | 0.50 % | ASTM D1003 |
| Transmission, Visible | 93 % | 93 % | Total light Transmission; ASTM D1003 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID® 6/6T GF 35 TS PA6/6T reinforced with glass fiber, improved heat resistance
- NOVA Chemicals Gedexcel® 45B Expandable Polystyrene
- Lanxess Durethan® BKV 15 DUS008 000000 Nylon 6, Glass Fiber Reinforced
- Solvay Specialty Polymers Cogegum® AFR/710 Polyolefin
- A. Schulman POLYBATCH™ White LL8425 AP Concentrate Based In LLDPE
- Braskem TS7003 LDPE Blown Film Extrusion Polyethylene
- Asahi Kasei Xyron® 450H Modified Polyphenylene Ether
- Polyplastic Armoflen® PO MF 75-2 Linear Low Density Polyethylene, 75% Calcium Carbonate
Copyright © lookpolymers.com All Rights Reserved