- HOME
- POLYMER SEARCH
- Polymer Property : Particle Size = 63 µm
Polymer Property : Particle Size = 63 µm Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Particle Size | 63 µm | 63 µm | Mean |
| Potters Industries Q-Cel® 5032S Hollow Engineered Glass Microspheres Q-CEL® hollow glass microspheres are alternatives to conventional fillers and additives such as silicas, calcium carbonates, talc, clay, etc. A variety of particle sizes, densities and strengths me.. |
|||
| Particle Size | <= 63 µm | <= 63 µm | 1.80% retained; ISO 1624 |
| SABIC PVC 673E Emulsion Polyvinyl Chloride Product Description: PVC 673E is a fine particle, medium-molecular weight PVC homopolymer, made by emulsion polymerization. It is designed for the manufacture of plastisols exhibiting high viscosi.. |
|||
| Particle Size | 63 µm | 63 µm | 3% max, wet sieve |
| Magyar Aluminum ALO-DN-7P Alumina Ground Alumina |
|||
| Particle Size | 63 µm | 63 µm | 3% max, wet sieve |
| Magyar Aluminum ALO-EL-7P Alumina Ground Alumina |
|||
| Particle Size | 63 µm | 63 µm | 0.5% max, wet sieve |
| Magyar Aluminum ALO-P95-08 Alumina Alumina for Polishing |
|||
| Particle Size | 63 µm | 63 µm | Maximum of 5% greater than |
| H.C. Starck Amperit® 526.077 Agglomerated, Sintered Tungsten Carbide-Cobalt (WC-Co) 83-17 |
|||
| Particle Size | 63 µm | 63 µm | Maximum 5% greater than, for WC-Co 83-17 |
| H.C. Starck Amperit® 560.077 Tungsten Carbide-Cobalt(83-17)-Nickel-SF RC 60 50-50 (Wc-Co / NiSF RC 60) Composition is of NiSF RC 60 only |
|||
| Particle Size | <= 63 µm | <= 63 µm | >95% for PM |
| H.C. Starck CuNi 97/3 Atomized Powder Ni- and FE based alloys for special P/M, HIP and MIM parts, Cu based alloys for brazing. |
|||
| Particle Size | <= 63 µm | <= 63 µm | >95% for PM |
| H.C. Starck NiAl 97/3 Atomized Powder Ni- and FE based alloys for special P/M, HIP and MIM parts, Cu based alloys for brazing. |
|||
| Particle Size | 63 µm | 63 µm | 0.22 |
| Mikro-Technik Mikroflon Micro Powder PTFE High quality additive for reinforced Thermoplastics. Composition: 100% PTFEInformation provided by Mikro-Technik GmbH |
|||
| Particle Size | <= 63 µm | <= 63 µm | 0.1; Malvern |
| SABIC Innovative Plastics NORYL SA120FIN PPE (Asia Pacific) Noryl* SA120FIN resin is a powder version of a low molecular weight polymer based on Polyphenylene ether (PPE). Noryl* SA120FIN is intended for use as additive or building block in a variety of the.. |
|||
| Particle Size | <= 63 µm | <= 63 µm | 0.1; Malvern |
| SABIC Innovative Plastics NORYL SA120FIN PPE (Europe-Africa-Middle East) Noryl* SA120FIN resin is a powder version of a low molecular weight polymer based on Polyphenylene ether (PPE). Noryl* SA120FIN is intended for use as additive or building block in a variety of the.. |
|||
| Particle Size | 63 µm | 63 µm | >80% greater than value; ISO 1624 |
| SolVin 250SB Polyvinyl Chloride General Purpose - Rigid Made by suspension polymerization.
APPLICATIONS
Injection : moldings with complex flow paths
Pressing : mixed with VC-VAc copolymers for gramophone records
Calendering : rigid films and sheets ; use.. |
|||
| Particle Size | 63 µm | 63 µm | >95% greater than value; ISO 1624 |
| SolVin 263RB Polyvinyl Chloride General Purpose - Rigid Made by suspension polymerization.
APPLICATIONS
Blow extrusion : opaque or crystal-clear bottles
Calendering : opaque or crystal-clear rigid sheets
Extrusion : rigid profiles and filmsInformation pr.. |
|||
| Particle Size | 63 µm | 63 µm | >90% greater than value; ISO 1624 |
| SolVin 264PC Polyvinyl Chloride General Purpose - Plasticized Made by suspension polymerization.
APPLICATIONS
Extrusion :
- plasticized, semi-rigid, and rigid profiles
- plasticized and rigid pipes
- blowing of plasticized and rigid films
- rigid "pressure" p.. |
|||
| Particle Size | 63 µm | 63 µm | <0.5 g/kg greater than value; ISO 1624 |
| SolVin 266SC Polyvinyl Chloride Pastes - filler Polymers Made by suspension polymerization.
APPLICATIONS
Filler polymer for plastisols.
CHARACTERISTICS
SolVin 266SC is a suspension resin with very low porosity, small particle size and a very low amount of.. |
|||
| Particle Size | >= 63 µm | >= 63 µm | >95% retained on 63 micron sieve; ISO 1624 |
| SolVin 267RC Polyvinyl Chloride Homopolymer Extrusion Grade Polyvinyl chloride made by suspension polymerization. Uses: Sewage pipes, pressure pipes, rigid profiles, window frames, electrical ductsInformation provided by SolVin. |
|||
| Particle Size | 63 µm | 63 µm | >95% greater than value; ISO 1624 |
| SolVin 271DF Polyvinyl Chloride General Purpose - Plasticized Made by suspension polymerization.
APPLICATIONS
Extrusion :
- plasticized and semi-rigid profiles and pipes
- blowing of plasticized films
Calendering : opaque or transparent, plasticized and semi-r.. |
|||
| Particle Size | 63 µm | 63 µm | >95% greater than value; ISO 1624 |
| SolVin 271GA Polyvinyl Chloride General Purpose - Plasticized Made by suspension polymerization.
APPLICATIONS
Extrusion :
- plasticized and semi-rigid pipes for medical applications
- plasticized film for blood bags
Injection molding : plasticized and semi-rig.. |
|||
| Particle Size | 63 µm | 63 µm | >55% greater than value; ISO 1624 |
| SolVin 550GA Copolymer of Vinyl Chloride and Vinyl Acetate Made by suspension polymerization.
APPLICATIONS
Calendering : semi-rigid floor coverings
Lining : fabrics, felts and cardboardInformation provided by SolVin. |
|||
| Particle Size | 63 µm | 63 µm | >60% greater than value; ISO 1624 |
| SolVin 557RA Copolymer of Vinyl Chloride and Vinyl Acetate Made by suspension polymerization.
APPLICATIONS
Extrusion : sheets for vacuum-forming, for deformations of over 500 %
Calendering : rigid sheets for deep thermoformingInformation provided by SolVin... |
|||
| Particle Size | 63 µm | 63 µm | >60% greater than value; ISO 1624 |
| SolVin 560RA Copolymer of Vinyl Chloride and Vinyl Acetate Made by suspension polymerization.
APPLICATIONS
Extrusion : sheets for vacuum-forming, for deformations of over 500 %
Calendering : rigid sheets for deep thermoformingInformation provided by SolVin... |
|||
| Particle Size | 63 µm | 63 µm | >90% greater than value; ISO 1624 |
| SolVin Vinidur® 464SZ Polyvinyl Chloride grafted copolymer TYPE
Suspension graft copolymer of vinylchloride and an acrylate elastomer. Vinidur 464SZ has been developed for the extrusion of window profiles with high impact strength and good weathering proper.. |
|||
| Particle Size | >= 63 µm | >= 63 µm | d50, 40%, Vibrated sieving |
| TIMCAL TIMREX® KS150 Primary Synthetic Graphite TIMREX Primary Synthetic Graphite is produced in a unique highly controlled graphitization process which assures narrow specifications and unequalled consistent quality due to: monitoring of all pro.. |
|||
| Particle Size | 63 µm | 63 µm | 10% below |
| BorsodChem ONGROVIL S-494 Suspension PVC-Resin S-494 is a suspension type PVC homopolymer of high molecular mass. It is characterized by a porous particle structure and a narrow range of particle size. It retains its excellent pourability even a.. |
|||
| Particle Size | 63 µm | 63 µm | 5% below |
| BorsodChem ONGROVIL S-5064 Suspension PVC-Resin S-5064 is a suspension type PVC homopolymer of medium molecular mass. It is characterized by a porous particle structure, a narrow range of particle size and a relatively high apparent density. It r.. |
|||
| Particle Size | 63 µm | 63 µm | 5% below |
| BorsodChem ONGROVIL S-5167 Suspension PVC-Resin S-5167 is a suspension type PVC homopolymer of medium molecular mass. It is characterized by a porous particle structure, a narrow range of particle size and a relatively high apparent density. It r.. |
|||
| Particle Size | 63 µm | 63 µm | VW-10300FP; D90 Particle sizes by sieve measurement |
| Solvay Specialty Polymers Virantage® VW-10300 P, FP Polyethersulfone (PESU)
(Unverified Data**) Virantage® VW-10300 polyethersulfone (PESU) is a non-functionalized, high-temperature sulfone polymer powder. Two grades are offered: Virantage VW-10300P and Virantage VW-10300FP, providing two par.. |
|||
| Particle Size | 63 µm | 63 µm | 5% below |
| BorsodChem ONGROVIL S-5258 Suspension PVC-Resin S-5258 is a suspension type PVC homopolymer of medium molecular mass. It is characterized by a porous particle structure, a narrow range of particle size and a relatively high apparent density. It r.. |
|||
| Particle Size | 63 µm | 63 µm | >90% greater than value; ISO 1624 |
| SolVin 460SL Polyvinyl Chloride grafted copolymer Made by suspension polymerization. Special product for calendered film from the high temperature process.
APPLICATIONS
Calendering : unplasticized PVC
- film : high temperature process
Extrusion : u.. |
|||
Copyright © lookpolymers.com All Rights Reserved