Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.928 - 0.932 g/cc | 0.0335 - 0.0337 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 4430S (30405) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D1505 |
Chevron Phillips mPact™ D352 m-LLDPE Linear Low Density Polyethylene
(discontinued **) Low Density PolyethyleneCustomer Benefits: This metallocene LLDPE film resin provides increased modulus over most LLDPE's while retaining excellent clarity and good toughness. Applications: Industr.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | Exxon Method |
ExxonMobil Optema® TC-020 Ethylene Methyl Acrylate for Extrusion Coating
(discontinued **) Data provided by the manufacturer, Exxon Chemical.6.5% Methyl Acrylate. An Ethylene Methyl Acrylate copolymer designed for extrusion coating, laminating and seaming applications. It can be process.. |
|||
Density | 0.928 - 0.953 g/cc | 0.0335 - 0.0344 lb/in³ | Average value: 0.940 g/cc Grade Count:22 |
Overview of materials for EMAAA Terpolymer This property data is a summary of similar materials in the MatWeb database for the category "EMAAA Terpolymer". Each property range of values reported is minimum and maximum values of appropriate M.. |
|||
Density | 0.928 - 0.932 g/cc | 0.0335 - 0.0337 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 4431S (30405) Linear Low Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D1505 |
Eastman 5269 LDPE 6.5% EVA Copolymer, Clarity, Ultra-high Impact Film Resin
(discontinued **) Resin Type: CopolymerCharacteristics: Medium Molecular Weight Distribution, Reduced Yellow Potential, Wide Range of Processing Conditions, Good Flow for Injection Blow Molding Applications, Good Par.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D1505 |
Eastman 5272 LDPE 4% VA Copolymer, High Clarity, High Impact Film Resin
(discontinued **) Resin Type: VA CopolymerCharacteristics: Good impact strength, Good bubble stability, Low coefficient of friction, Medium antiblock, Medium slip, Good low temperature properties, Good heat seal char.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D792 |
DuPont Appeel® LSR11D704 Lidding Sealant Resin
(discontinued **) Appeel® LSR11D704 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide very strong peelable s.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | Exxon Method |
ExxonMobil Escorene® LD-317 EVA Film Resin, FMI
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A fractional melt index, 5.5% vinyl acetate copolymer film resin. Film made from LD-317 offers excellent impact strength, tensile properties, and h.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D1505 |
Huntsman PE1753 EVA Film Extrusion
(discontinued **) 7.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Yields film with good clarity and excellent impact strength.Applications: Film extrusion: icebags, liquid packaging, lamination film, and .. |
|||
Density | 0.928 - 0.950 g/cc | 0.0335 - 0.0343 lb/in³ | Average value: 0.938 g/cc Grade Count:30 |
Overview of materials for Medium Density Polyethylene (MDPE), Molded This property data is a summary of similar materials in the MatWeb database for the category "Medium Density Polyethylene (MDPE), Molded". Each property range of values reported is minimum and maxim.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
LyondellBasell Lupolen® 3020 F LDPE Blown film, injection moldings, blow moldings.Data was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
LyondellBasell Lupolen® 3020 H LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
LyondellBasell Lupolen® 3024 H LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
LyondellBasell Lupolen® 3026 F LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
LyondellBasell Lupolen® V 2920 K Ethylene Vinyl Acetate, lnjection Molding Grade Injection moldingsData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Density | 0.928 - 0.935 g/cc | 0.0335 - 0.0338 lb/in³ | |
Kazanorgsintez M 115 SV Polymer Composition for Rotary Molding Production Method: Composition is produced on the basis of 11503-070 grade low density polyethylene and 276-03 grade high density polyethylene composition. Application: Compositions are designed.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D792 |
DuPont Bynel® 4109 Anhydride-Modified LLDPE Adhesive Resin Bynel® Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 Series resins are available in pellet form for use in conventional extrusion and coextrusi.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D792 |
DuPont Bynel® 2022 Acid-Modified Ethylene Terpolymer Adhesive Resin Bynel® Series 2000 resins are acid-modified ethylene terpolymers with medium to high acid comonomer contents. They contain a temperature stable ester that makes them functional in high-temperature .. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 362BW Low Density Polyethylene Resin Product Description: LD 362 series are LEVA LDPE grades, offering good mechanical and sealing properties. Several additive combinations are available according to the required surface properties.Ava.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 362ON Low Density Polyethylene Resin Product Description: LD 362 series are LEVA LDPE grades, offering good mechanical and sealing properties. Several additive combinations are available according to the required surface properties.Ava.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 363BR Low Density Polyethylene Resin Product Description: LD 363 series are LEVA LDPE grades, offering good optical and mechanical properties. Two additive combinations are available according to the required surface properties.Availab.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ExxonMobil method |
ExxonMobil LDPE LD 363BW Low Density Polyethylene Resin Product Description: LD 363 series are LEVA LDPE grades, offering good optical and mechanical properties. Two additive combinations are available according to the required surface properties.Availab.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D792 |
Dow 650I Low Density Polyethylene Resin DOW LDPE 650I Resin is intended for use in soft goods over wrap, bread bags, shrink films and other general purpose applications.Information provided by Dow |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
Dow DOWLEX™ 2071 Linear Low Density Polyethylene DOWLEX® 2071 Polyethylene resin is a linear low density polyethylene resin specifically designed for the manufacture of high strength, thin gauge films for use in applications such as grocery sacks.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
BASF Lucalen® A 3110 M Q 244 Ethylene/Acrylate Copolymer Data was collected by ISO methods and provided by BASF. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | |
Arkema Group Evatane® 1005 VN 3 Ethylene Vinyl Acetate EVA copolymer made by high pressure tubular process. Applications Grade for flexible, very transparent film with high strength, shrinking at low temperature. Examples: curtain stretch, coextrusion, .. |
|||
Density | 0.928 - 0.930 g/cc | 0.0335 - 0.0336 lb/in³ | ASTM D1505 |
Petroquimica Triunfo Trithene® SX 9003 MDPE - Blow Molding The Trithene® SX 9003 resin is a medium density polyethylene (MDPE) with high molecular weight that presents excellent mechanical properties, thermal stability and high stiffness when compared with.. |
|||
Density | 0.928 g/cc | 0.0335 lb/in³ | ASTM D792 |
DuPont Bynel® 2169 Anhydride-Modified Ethylene Acrylate Adhesive Resin
(discontinued **) Bynel® Series 2100 resins are anhydride-modified ethylene acrylate resins. They contain a temperature stable ester that makes them functional in high temperature coextrusions. They are available in.. |