Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
Mytex Polymers AN16L-06 Polypropylene, Compounded Description: Compounded polypropylene produced for automotive exterior applications using Mytex® Technology.Key Applications: Body side moldingInformation provided by Mytex Polymers |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ISO 1183 |
PolyOne OnFlex™ S EF 60A-3S1967 Thermoplastic Elastomer (TPE) OnFlex™-S EF thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver good mechanical properties together with excell.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ISO 1183 |
PolyOne OnFlex™ S EF 70A-3S1975 Thermoplastic Elastomer (TPE) OnFlex™-S EF thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver good mechanical properties together with excell.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
Mytex Polymers AS66K-01 Polypropylene, Talc filled, Compounded Description: Talc filled compounded polypropylene produced for automotive interior applications using Mytex® Technology.Key Applications: General purpose interiorInformation provided by Mytex Polym.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | |
Premix Thermoplastics PRE-ELEC® PP 1375 PRE-ELEC PP 1375 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELE.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792-91 |
Multibase Multi-Flex® TPO D-6206 This TPO product was developed for facia applications exhibiting adhesion for current automotive paint systems.Data provided by Multibase. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ISO 1183 |
Polykemi AB POLYfill PP HJ752 Polypropylene/Elastomer, Mineral Reinforced Information provided by Polykemi AB |
|||
Density | 0.980 - 1.10 g/cc | 0.0354 - 0.0397 lb/in³ | Average value: 1.04 g/cc Grade Count:84 |
Overview of materials for Polypropylene with 20% Calcium Carbonate (CaCO3) Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Calcium Carbonate (CaCO3) Filler". Each property range of values reported is mini.. |
|||
Density | 0.980 g/cc @Temperature 20.0 °C |
0.0354 lb/in³ @Temperature 68.0 °F |
|
LyondellBasell DPMA Dipropylene glycol methyl ether acetate Information provided by Lyondell. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
Global TPP-110 10% Talc Filled Polypropylene Information provided by Global Polymers Corporation. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP STAT-KON MX01767C PP LNP* STAT-KON* MX01767C is a compound based on Polypropylene containing Proprietary Filler(s). Added features of this grade include: Electrically Conductive, Clean Compounding System. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP STAT-KON MX10301C PP LNP* STAT-KON* MX10301C is a compound based on Polypropylene containing Proprietary Filler(s). Added features of this grade include: Electrically Conductive, Clean Compounding System. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
Techmer ES HiFill® PP GF10 CC 10% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 10% Filler by WeightFeatures: Chemically CoupledInformation provided by TP Composites, Inc. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D 792 |
SABIC Innovative Plastics LNP Thermocomp MX01767C PP LNP* Stat-Kon* MX01767C is a compound based on Polypropylene containing Proprietary Fillers. Charactiers of this grade are Statically Conductive, Clean Compound System.This data was supplied by SAB.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
Techmer ES HiFill FR® PP CO FR-N Availability: North AmericaForms: PelletsFeatures: Flame Retardant, High Impact Resistance and CopolymerInformation provided by TP Composites, Inc. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
Techmer ES HiFill® LDPE 0098 S LE Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforAdditive: Heat StabilizerFeatures: Low ExtractablesInformation provided by TP Composites, Inc. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
Plastics Group Polifil® RMC-10 10% Calcium Carbonate-Reinforced Polypropylene, High Impact Polifil® RMC series compounds are high impact polypropylenes reinforced with fine particle size calcium carbonate. In addition to the highest impact possible, they possess good stiffness, heat agin.. |
|||
Density | 0.980 - 1.00 g/cc | 0.0354 - 0.0361 lb/in³ | |
Wacker Silicones Geniomer® 140 Silicone TPE SLM TPSE 140 is a silicone copolymer containing over 90% siloxane. Geniomer® is a two phase block copolymer made up of a soft polydimethylsiloxane (PDSM) phase and a hard aliphatic isocyanate phas.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ISO 1183 |
Tisan TISOPLEN® 10% Calcite Filled Heat Stabilized Copolymer Polypropylene TISOPLEN has a wide area of application in furniture, durable goods, household appliances, electrics/electronics, and telecommunication industries. General specifications include Low densityLow mois.. |
|||
Density | 0.980 g/cc @Temperature 330 °C |
0.0354 lb/in³ @Temperature 626 °F |
Melt |
Covestro Apec® DP1-9354/1 Polycarbonate, Flame Retardant Grade Developmental productflame retardant: V-0/3,2mm (UL 94)V-2/1,5mm (UL 94),softening temperature (VST/B 120)=185 °Calso available in transparent colorsPreprocessingMax. Water content |
|||
Density | 0.980 - 0.990 g/cc | 0.0354 - 0.0358 lb/in³ | |
BASF 3-Amino-1-propanol Formula: C3H9NOCAS: 156-87-6Description: 3-amino-1-propanol is a colorless to yellow liquid with an amine-like odor. It is miscible with water in all proportions. Synonyms: Propanolamine, 3-aminopr.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | Polyol [Part B]; ASTM D891 |
3M Scotchcast™ 2136 Potting Kit The 3M Scotchcast Potting Kit 2136 is designed to provide protection against corrosion and possible deteriorating effects of fresh swimming pool or fountain water and sunlight by reliably encapsulat.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | |
3M 9085UV Ultra High Temperature 100 HT Adhesive Transfer Tape 3M™ Ultra High Temperature 100HT Adhesive Transfer Tapes 9082 and 9085 utilize a high performance and low outgassing adhesive system having excellent heat resistance in high temperature environment.. |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | |
DuPont Performance Polymers Zytel® 101 NC010 Nylon 66
(Unverified Data**) Unreinforced Polyamide 66Zytel 101 NC010 is a general purpose polyamide 66 resin for injection molding and extrusion.Information provided by DuPont Performance Polymers |
|||
Density | 0.980 g/cc | 0.0354 lb/in³ | ASTM D792 |
DuPont Bynel® 3859 Anhydride-Modified Ethylene Vinyl Acetate Adhesive Resin
(discontinued **) Bynel® Series 3800 resins are anhydride-modified ethylene vinyl acetate polymers. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process p.. |
|||
Density | 0.980 - 0.980 g/cc @Temperature 285 - 285 °C |
0.0354 - 0.0354 lb/in³ @Temperature 545 - 545 °F |
Average value: 0.980 g/cc Grade Count:1 |
Overview of materials for Nylon 6, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Unreinforced". Each property range of values reported is minimum and maximum values of appropri.. |