Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Minimum Service Temperature, Air = -65.0 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Resinlab® CYNERGY CA6906 Adhesive
Description: The CYNERGY 6900 SERIES are for use in demanding applications where very fast cure speeds and high temperature resistance are required. These are single component solvent free materials..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
ND Industries High Temperature SuperGlue 311
Very high viscosity with thermal cycling resistance
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
ND Industries StudGrade® 146 Permanent StudGrade HD Threadlocker
General DescriptionHigh strength, high viscosity threadlockers for maximum security. Suitable for most applications where disassembly is not required.Typical UsesFasteners over 1" diameter with coa..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
ND Industries SuperGlue Ethyl 314
General DescriptionA medium viscosity ethyl-based cyanoacrylate particularly suitable for rubbers and plastics. It is fast acting and may be fillet cured using ND Excel Accelerators.rubber O-rings,..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
ND Industries SuperGlue Ethyl 320
Very low viscosity for pre-assembled componentsMeets military spec Mil-A-46050C Type II Class I
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
ND Industries SuperGlue Ethyl 395
General DescriptionA low viscosity ethyl-based cyanoacrylate that exhibits fast cure speeds on a wide range of common materials such as metals, rubbers, and plastics.Typical Usesloudspeaker componen..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Cured State
Palm Labs Adhesives TURBO FUSE SERIES 190 CLEAR FLEXIBLE (4000 Viscosity) Rapid Bonding Adhesive
Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. TURBO FUSE SERIES 120 LOW ODER advanced formula is designed to polymerize instantly by absorbing surface moisture. The product's p..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Permabond HH131 High Temperature Threadlocker
Permabond® HH131 is a very high temperature resistant, high strength anaerobic threadlocker and sealant. This material cures in the absence of air between tight fitting metal parts. It is used for ..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Resinlab® CYNERGY CA6105 Adhesive
Description: The CYNERGY 6100 SERIES products are used to bond metal to itself or other substrates. It is available in five standard viscosities.Application: The CYNERGY SERIES of the cyanoacrylates..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Resinlab® CYNERGY CA6401 Adhesive
Description: The CYNERGY 6400 SERIES are clear, highly toughened, high peel strength products ideal for bonding dissimilar materials with excellent performance on a wide range of surfaces. They impa..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Resinlab® CYNERGY CA6809 Adhesive
Description: The CYNERGY 6800 SERIES are clear, high strength products ideal for bonding dissimilar materials with excellent performance on a wide range of surfaces. This series of products has USP ..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Permabond MH199 Anaerobic Gasketmaker
Permabond® MH199 is an anaerobic material designed for making “formed in situ” gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets, thereby offering po..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Resinlab® CYNERGY CA6701 Adhesive
Description: The CYNERGY 6700 SERIES are modified to provide greatly reduced odor and a further reduction of bloom or frosting of plastics when compared to the 6600 Series. These products are ideal ..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Resinlab® CYNERGY CA6901 Adhesive
Description: The CYNERGY 6900 SERIES are for use in demanding applications where very fast cure speeds and high temperature resistance are required. These are single component solvent free materials..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Master Bond MasterSil 156 Two Part, Low Viscosity Silicone
Description: Master Bond MasterSil 156 is a two component, lower viscosity silicone system for high performance potting, encapsulation and sealing. MasterSil 156 combines high temperature resistance..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Master Bond MB297FL Cyanoacrylate Adhesive System
Vibration & shock resistant, fills gap to 0.007Information provided by Master Bond Inc.
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® 3336 Epoxy Light Cure Adhesive
Epoxy Light Cure AdhesivesLoctite® 3336 Epoxy Light Cure AdhesiveA UV cure, medium viscosity two-part epoxy. UV cure effects fast gellation. Complete cure at room temperature or heat cure. Tough an..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® 3751 Acrylic Light Cure Adhesive
Acrylic Light Cure AdhesivesVersatile Loctite® ultraviolet (UV) and visible light curing adhesives can be used in bonding, encapsulating, coating, tacking, and sealing applications. These single co..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® Gasket Eliminator® 518 Flange Sealant
Anaerobic GasketingLoctite® 518 Flexible Cure Gasket Eliminator® Flange SealantForms a flexible, solvent-resistance seal that will not tear or decay. Seals to 300ºF and fills gaps to 0.050". Can..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® PRISM® 4212 Instant Adhesive Gel
Cyanoacrylate Bonding AdhesivesLoctite® technology has made the productivity promises of cyanoacrylate adhesives a reality with the industry's widest selection of high-performance, application-..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® PST® 565 Thread Sealant
Thread SealersLoctite® Liquid Thread Sealants seal and secure metal pipes and fittings, filling the space between threaded metal parts, and hardening to prevent leakage. Designed for low and high p..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® PST® 567 Thread Sealant
Thread SealersLoctite® Liquid Thread Sealants seal and secure metal pipes and fittings, filling the space between threaded metal parts, and hardening to prevent leakage. Designed for low and high p..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® SpeedBonder™ 325 High Temperature Acrylic Bonding Adhesive
Acrylic Bonding AdhesivesLoctite® Acrylic Adhesives were developed for bonding applications that require tensile, shear and peel strength combined with maximum impact, stress and shock resistance. ..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Cytec CE-1171 (Conap) Acrylic Dielectric Conformal Coating
Dielectric Conformal Coatings for ElectronicsCytec dielectric conformal coatings are the most widely used conformal coatings in industry today for such divergent applications as aircraft avionics, i..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Cytec Conathane® CC-1194 (Conap) Polyurethane Dielectric Conformal Coating
Dielectric Conformal Coatings for ElectronicsCytec dielectric conformal coatings are the most widely used conformal coatings in industry today for such divergent applications as aircraft avionics, i..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Arlon 920-10CxxFR-P1 0.020" Self-Fusing Silicone Rubber Tape
1 inch wide, 20 mil thick, brown, rectangular cross-section, self-fusing silicone tape. Product is supplied in various yard long roll lengths as indicated by the xx characters in the part number.De..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® 577 Coarse Threads Thread Sealant
Thread SealersLoctite® Liquid Thread Sealants seal and secure metal pipes and fittings, filling the space between threaded metal parts, and hardening to prevent leakage. Designed for low and high p..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® 661 Retaining Compound
RetainersLoctite Corporation, the pioneer of anaerobic adhesives, has applied this technology to create retaining compounds that increase the shear strength of cylindrical, non-threaded assemblies. ..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® 4601 Cyanoacrylate Adhesive
Medical Grade BondersLoctite offers the most comprehensive line of adhesives and sealants available to the medical device industry. These USP class VI and/or ISO-10993 compliant products are designe..
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Loctite® Prism® 4011 Cyanoacrylate Adhesive
Medical Grade BondersLoctite offers the most comprehensive line of adhesives and sealants available to the medical device industry. These USP class VI and/or ISO-10993 compliant products are designe..
Copyright © lookpolymers.com All Rights Reserved