Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Secant Modulus, MD | 0.159 GPa | 23.1 ksi | ASTM D882 |
Huntsman PE1068 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Exceptional draw down and processability even to 1/2 mil; excellent strength, good heat sealability, and good optical.FDA Notes: Conforms to FDA regulation 21.. |
|||
Secant Modulus, MD | 0.159 GPa | 23.1 ksi | ASTM D882 |
Huntsman PE1257 EVA Film Extrusion
(discontinued **) 2.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, good heat seal characteristics.Applications: Film extrusion: general purpose packaging where to.. |
|||
Secant Modulus, MD | 0.159 GPa | 23.1 ksi | ASTM D882 |
M. Holland Company EV200 EVA
(discontinued **) Features: Good Heat Seal, Opticals, High StrengthUses: PackagingApprovals: FDA 21 CFR 177.1350 and FDA 21 CFR 176.170,Table 2, Cond. C, D, E, F, GProcessing Method: Film, BlownInformation provided b.. |
|||
Secant Modulus, MD | 0.159 GPa | 23.1 ksi | 50 µm (2 mil) film; ASTM D882 |
DuPont Nucrel® 0902HC Ethylene-Methacrylic Acid Copolymer Resin for Blown and Cast Film 9 wt% Methacrylic Acid.Nucrel® 0902HC (High-Clarity) is an ethylene-methacrylic acid copolymer resin available for use in conventional blown and cast film extrusion and coextrusion equipment design.. |
|||
Secant Modulus, MD | 0.159 GPa | 23.1 ksi | ASTM D882 |
Chevron Phillips MarFlex® 5428 LDPE Cast Film Resin Resin Type: HomopolymerCharacteristics: Excellent OpenabilitySuited for high speed convertingGood clarityLow COFApplications: Bakery FilmBreak BagsInformation provided by Chevron Phillips. |
|||
Secant Modulus, MD | 0.159 GPa | 23.1 ksi | 0.1 mm/mm-min Initial Strain Rate; ASTM D-882 |
Bapolene® 105F Low Density Polyethylene Film Resin Description: Bapolene LD105F is an unmodified low density polyethylene which extrudes into a low gloss high impact film. It contains antiblock additives and no slip additives. This product meets th.. |
|||
Secant Modulus, MD | 0.159 GPa | 23.1 ksi | ASTM D882 |
Huntsman PE 1253 EVA Film Extrusion
(discontinued **) 2.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, good heat seal characteristics.Applications: Film extrusion: general purpose packaging where to.. |