Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 13.3 MPa | 1930 psi | Across flow; ASTM D412 |
Advanced Elastomer Systems Santoprene® 8281-90 Thermoplastic Rubber
(discontinued **) Description: A colorable thermoplastic medical grade elastomer. It has USP Class VI Certificate of Compliance for biocompatibility and can be processed using injection molding, extrusion, or other .. |
|||
Tensile Strength at Break | 13.3 MPa | 1930 psi | |
Shin-Etsu Silicones FE-341U Fluorosilicone Elastomer ShinEtsu FE341 U is one of a series of high tensile, high tear fluorosilicone compounds. It is designed to process well in molding applications. It can be blended with other members of the series fo.. |
|||
Tensile Strength at Break | 13.3 MPa | 1930 psi | ASTM D638 |
Teknor Apex Flexalloy® 9602-72FR Polyvinyl Chloride, Elastomer Notes: 105°C Jacket; RoHS Compliant Features: Flame Retardant; High Heat Resistance; Low Temperature Flexibility; Sunlight Resistant (720 hours) Uses Cable Jacketing Wire Types: SEOW; SEW; SJEOW;.. |
|||
Tensile Strength at Break | 13.3 MPa | 1930 psi | ASTM D412 |
Teknor Apex Monprene® MP-2455N Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | 13.3 MPa | 1930 psi | Post Cure 16 Hours @ 230°C |
3M Dyneon™ LTFE 6400Z Low Temperature Fluoroelastomer 3M™ Dyneon™ Low Temperature Fluoroelastomers LTFE 6400Z are technically advanced low temperature, peroxide-cured fluoroelastomers, designated as a FKM type 3 elastomer per ASTM D1418. They are des.. |
|||
Tensile Strength at Break | 13.3 MPa | 1930 psi | Post Cure 16 Hours @ 230°C |
3M Dyneon™ LTFE 6400ZC Low Temperature Fluoroelastomer 3M™ Dyneon™ Low Temperature Fluoroelastomers LTFE 6400ZC are technically advanced low temperature, peroxide-cured fluoroelastomers, designated as a FKM type 3 elastomer per ASTM D1418. They are de.. |
|||
Tensile Strength at Break | 13.3 MPa | 1930 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FE 5610 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5610 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |