Polymer Property : Linear Mold Shrinkage, Flow = 0.00300 cm/cm Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage, Flow	0.00300 cm/cm @Thickness 3.17 mm	0.00300 in/in @Thickness 0.125 in	ASTM D955
Oxford Polymers Oxtron PPS-XT-40GF PPS, 40% Glass Reinforced Product Description: Glass Fiber (40% Reinforced), Polyphenylene sulfide injection molding grade based alloy. Processing and Delivery Form: Pellets and Injection MoldingAppearance: Natural off-whit..
Linear Mold Shrinkage, Flow	0.00300 cm/cm	0.00300 in/in	ASTM D955
Oxford Polymers PBT 30GF PBT, 30% Glass Fiber Reinforced Product Description: Glass Fiber (30% Reinforced), PBT injection molding grade Processing and Delivery Form: Pellets and Injection MoldingAdditives: Release Agents and LubricantsSpecial Characteris..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	Injection and Compression; ISO 2577
Raschig Group EPOXIDUR® 3585 EP Epoxy, Molded, Glass Fiber Filler Glass-fiber reinforced and inorganically filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures, excel..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	Injection and Compression; ISO 2577
Raschig Group RESINOL® 87120 EPF Phenolic Glass-fiber reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and very good mechanical properties. This product meets ..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ASTM D955
Celanese CELANEX 1462Z PBT, 30% Glass Reinforced Celanex 1462Z is a general purpose, 30% glass reinforced polybutylene terephthalate with a good balance of mechanical properties and processability.Information provided by Celanese
Linear Mold Shrinkage, Flow	0.00300 - 0.00600 cm/cm	0.00300 - 0.00600 in/in	ISO 294-4
Celanese CELANEX 3216 PBT, 15% Glass Reinforced Celanex 3216 is a non-exuding (UL and CSA approved V-0 at 1/32 inch and 5V at 1/8 inch ),15% fiberglass reinforced polybutylene terephthalate which has an excellent balance of mechanical properties ..
Linear Mold Shrinkage, Flow	0.00300 - 0.00700 cm/cm	0.00300 - 0.00700 in/in	ISO 294-4
Celanese CELANEX 3300 PBT, 30% Glass Reinforced Ceanex 3300 is a general purpose, 30% glass reinforced, polybutylene terephthalate that offers a superior combination of mechanical, electrical, and thermal properties. This grade provides outstandi..
Linear Mold Shrinkage, Flow	0.00300 - 0.00700 cm/cm	0.00300 - 0.00700 in/in	ISO 294-4
Celanese CELANEX 3300-2 PBT, 30% Glass Reinforced Celanex 3300-2 is a general purpose, 30% glass reinforced, polybutylene terephthalate that offers a superior combination of mechanical, electrical, and thermal properties. This grade provides outsta..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ASTM D955
Celanese CELANEX 3300FC PBT, 30% Glass Reinforced Celanex 3300FC is a general purpose, 30% glass reinforced, polybutylene terephthalate that offers a superior combination of mechanical, electrical, and thermal properties. This grade provides outsta..
Linear Mold Shrinkage, Flow	0.00300 - 0.00700 cm/cm	0.00300 - 0.00700 in/in	ISO 294-4
Celanese CELANEX 3300FC PBT, 30% Glass Reinforced Celanex 3300FC is a general purpose, 30% glass reinforced, polybutylene terephthalate that offers a superior combination of mechanical, electrical, and thermal properties. This grade provides outsta..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ASTM D955
Celanese CELANEX 3300LM PBT, 30% Glass Reinforced Celanex 3300LM is a 30% glass reinforced lasermarkable grade specially formulated to yield crisp marks when subjected to a Nd:YAG laser or equivalent operated at 1064nm or 532nm. Lasers operating i..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese CELANEX 3400 PBT, 40% Glass Reinforced Celanex 3400 is a general purpose, 40% glass reinforced polybutylene terephthalate that offers a good combination of mechanical, electrical, and thermal properties. This grade provides outstanding p..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese CELANEX 3400-2 PBT, 40% Glass Reinforced Celanex 3400-2 is a general purpose, 40% glass reinforced polybutylene terephthalate that offers a good combination of mechanical, electrical, and thermal properties. This grade provides outstanding..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese CELANEX 4300FC PBT, 30% Glass Reinforced Celanex 4300FC is a toughened, 30% glass reinforced PBT for use in food contact applications.Information provided by Celanese
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese CELANEX 4300LM PBT, 30% Glass Reinforced Celanex 4300LM is a toughened 30% glass reinforced PBT that is enhanced for improved laser marking graphics.it is a lasermarkable grade available in a black color to mark white, The grade is special..
Linear Mold Shrinkage, Flow	0.00300 - 0.00600 cm/cm	0.00300 - 0.00600 in/in	ISO 294-4
Celanese FORTRON 1120L4 PPS, 20% Specialty Fortron 1120L4 is a 20% glass fiber reinforced injection molding grade exhibiting excellent heat and chemical resistance, inherent flame retardancy, high hardness and stiffness at elevated temperatu..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese FORTRON 1130L4 PPS, 30% Glass Reinforced Fortron 1130L4 is a 30% glass-reinforced PPS that has excellent heat and chemical resistance. It is inherently flame-retardant and exhibits high hardness and a good balance of strength and stiffness..
Linear Mold Shrinkage, Flow	0.00300 - 0.00600 cm/cm	0.00300 - 0.00600 in/in	ISO 294-4
Celanese FORTRON 4184L4 PPS, 53% Mineral / Glass Reinforced Fortron 4184L4 is the strongest and toughest glass/mineral reinforced product available. It offers excellent heat resistance at high loads and good chemical resistance. The electrical properties are..
Linear Mold Shrinkage, Flow	0.00300 cm/cm	0.00300 in/in	ISO 294-4
Celanese VECTRA A725 LCP, 25% Specialty Conductive Vectra grade, smooth surface compared to A700. 25% filled grade.Information provided by Celanese
Linear Mold Shrinkage, Flow	0.00300 cm/cm	0.00300 in/in	ISO 294-4
Celanese VECTRA V143XL LCP, 42% Glass Reinforced LCP/PPS blend. Maintains most of the characteristics of E130i with improved weldline strength and flatness in certain geometries. 40% glass reinforced.Information provided by Celanese
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese CELANEX 3300-2LM PBT, Glass Reinforced Celanex 3300-2LM is a 30% glass-filled PBT that is enhanced for improved laser marking graphics. It contains an internal lubricant for enhanced mold release. It is a lasermarkable grade available i..
Linear Mold Shrinkage, Flow	0.00300 - 0.00400 cm/cm	0.00300 - 0.00400 in/in	ASTM D955
Celanese CELANEX 6407 PBT, 30% Mineral / Glass Reinforced Celanex 6407 is a 30% glass/mineral reinforced resin perticularly suited for large exterior automotive components, where extended flow, flatness and good surface appearance is essential.Information ..
Linear Mold Shrinkage, Flow	0.00300 - 0.00600 cm/cm	0.00300 - 0.00600 in/in	ISO 294-4
Celanese CELANEX 6407 PBT, 30% Mineral / Glass Reinforced Celanex 6407 is a 30% glass/mineral reinforced resin perticularly suited for large exterior automotive components, where extended flow, flatness and good surface appearance is essential.Information ..
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese CELANEX XFR 6842 GF30 PBT, 30% Glass Reinforced Celanex XFR 6842 GF30 is a halogen and antimony free flame retardant (V-0 @ 0.4 mm) 30% glass reinforced PBT grade with good processability and no corrosive emissions during processing. It is suita..
Linear Mold Shrinkage, Flow	0.00300 - 0.00600 cm/cm	0.00300 - 0.00600 in/in	ISO 294-4
Celanese FORTRON 6850L6 PPS, 50% Mineral / Glass Reinforced Fortron 6850L6 offers the lowest warpage available. The easy flowing nature allows this product to be injection molded into thin walled applications. The excellent balance of mineral and glass fiber..
Linear Mold Shrinkage, Flow	0.00300 cm/cm	0.00300 in/in	ISO 294-4
Celanese THERMX CG933 PCT, 30% Glass Reinforced Thermx« CG933 is a 30% glass fiber reinforced and flame retardant polycyclohexylenedimethylene terephthalate for injection molding.Information provided by Celanese
Linear Mold Shrinkage, Flow	0.00300 cm/cm	0.00300 in/in	ISO 294-4
Celanese THERMX CGT33 PCT, 30% Specialty Thermx« CGT33 is a 30% glass fiber reinforced and toughened polycyclohexylenedimethylene terephthalate for injection molding.Information provided by Celanese
Linear Mold Shrinkage, Flow	0.00300 cm/cm	0.00300 in/in	ASTM D955
Celanese Celstran® PA66-AF35-02-US Nylon 66, 35% Aramid Reinforced PA66 with 35% aramid fiber by weightInformation provided by Celanese
Linear Mold Shrinkage, Flow	0.00300 - 0.00500 cm/cm	0.00300 - 0.00500 in/in	ISO 294-4
Celanese FORTRON 6345L4 PPS, 30% Specialty Fortron 6345L4 is 30% glass fiber/high PTFE reinforced injection molding grade. This grade, available in natural and black color, exhibits improved wear and sliding properties versus 1342L4 product...
Linear Mold Shrinkage, Flow	0.00300 cm/cm	0.00300 in/in	ISO 294-4
Celanese THERMX CG023 PCT, 20% Glass Reinforced Thermx« CG023 is a 20% glass fiber reinforced polycyclohexylenedimethylene terephthalate for injection molding.Information provided by Celanese