Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Linear Mold Shrinkage, Flow = 0.00200 in/in Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Linear Mold Shrinkage, Flow 0.00200 cm/cm

@Thickness 3.17 mm
0.00200 in/in

@Thickness 0.125 in
ASTM D955
Oxford Polymers PEEK-20CF-Black PEEK, 20% Carbon Fiber Reinforced
Product Description: Carbon Fiber (20% Reinforced), PEEK, Polyetheretherketone, injection molding grade Processing and Delivery Form: Pellets and Injection MoldingAdditives: Carbon fiber Special Ch..
Linear Mold Shrinkage, Flow 0.00200 - 0.00450 cm/cm
0.00200 - 0.00450 in/in
Injection; ISO 2577
Raschig Group 6502 DAIP Diallyl Phthalate (DAP), Cast, Mineral Filler
Glass-fiber reinforced diallyl isophthalate molding compound. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exceptional dimensi..
Linear Mold Shrinkage, Flow 0.00200 - 0.00400 cm/cm
0.00200 - 0.00400 in/in
ISO 2577
Raschig Group EN 5004 Epoxy Molding Compound
Mica reinforced molding compound. Low mold shrinkage and post-shrinkage, very good electrical values, outstanding heat resistance, very goo pourablity. This product meets the allowed upper limits fo..
Linear Mold Shrinkage, Flow 0.00200 - 0.00400 cm/cm
0.00200 - 0.00400 in/in
ISO 2577
Raschig Group EN 5007 Epoxy Molding Compound
Mica reinforced molding compound. Low mold shrinkage and post-shrinkage, very good electrical values, outstanding heat resistance, very goo pourablity. This product meets the allowed upper limits fo..
Linear Mold Shrinkage, Flow 0.00200 - 0.00500 cm/cm
0.00200 - 0.00500 in/in
Injection; ISO 2577
Raschig Group RALUPOL® 4802 UP Polyester
Glass-fiber reinforced polyester molding compound. Low mold shrinkage and post-shrinkage, good electrical values, excellent heat resistance, outstanding pourability. This product meets the allowed u..
Linear Mold Shrinkage, Flow 0.00200 - 0.00500 cm/cm
0.00200 - 0.00500 in/in
ISO 294-4
Celanese CELANEX 3300HR PBT, 30% Glass Reinforced
Celanex 3300HR is a 30% glass reinforced polybutylene terephthalate which has excellent hydrolysis resistance, mechanical properties and processabilityInformation provided by Celanese
Linear Mold Shrinkage, Flow 0.00200 - 0.00500 cm/cm
0.00200 - 0.00500 in/in
ISO 294-4
Celanese CELANEX 3300LM PBT, 30% Glass Reinforced
Celanex 3300LM is a 30% glass reinforced lasermarkable grade specially formulated to yield crisp marks when subjected to a Nd:YAG laser or equivalent operated at 1064nm or 532nm. Lasers operating i..
Linear Mold Shrinkage, Flow 0.00200 - 0.00300 cm/cm
0.00200 - 0.00300 in/in
ASTM D955
Celanese Celstran® PPS-GF40-01 AD3002 Black PPS, 40% Glass Reinforced
40% long strand fiber glass reinforced polyphenylene sulfideInformation provided by Celanese
Linear Mold Shrinkage, Flow 0.00200 - 0.00600 cm/cm
0.00200 - 0.00600 in/in
ISO 294-4
Celanese FORTRON 1140L6 PPS, 40% Glass Reinforced
Fortron 1140L6 is an easier flow version of Fortron 1140L4. It offers essentially the same characteristics of 1140L4. Especially used for thin walled parts with long flow lengths. Applications made ..
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese FORTRON 1342L4 PPS, 40% Specialty
Fortron 1342L4 is a low wear grade, ideally suited for bearings, gears and other sliding friction/wear applications. This product is glass fiber reinforced and contains PTFE.Information provided by ..
Linear Mold Shrinkage, Flow 0.00200 - 0.00300 cm/cm
0.00200 - 0.00300 in/in
ASTM D955
Celanese FORTRON 1342L4 PPS, 40% Specialty
Fortron 1342L4 is a low wear grade, ideally suited for bearings, gears and other sliding friction/wear applications. This product is glass fiber reinforced and contains PTFE.Information provided by ..
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese THERMX CG033 PCT, 30% Glass Reinforced
Thermx« CG033 is a 30% glass fiber reinforced polycyclohexylenedimethylene terephthalate for injection molding.Information provided by Celanese
Linear Mold Shrinkage, Flow 0.00200 - 0.00300 cm/cm
0.00200 - 0.00300 in/in
ASTM D955
Celanese FORTRON 11400000000 PPS, 40% Glass Reinforced
Fortron 1140E7 is an inherently flame-retardant grade exhibiting extremely low flash and fast cycle times. It has excellent electrical properties, high hardness and stiffness. This grade exhibits go..
Linear Mold Shrinkage, Flow 0.00200 - 0.00600 cm/cm
0.00200 - 0.00600 in/in
ISO 294-4
Celanese FORTRON 11400000000 PPS, 40% Glass Reinforced
Fortron 1140E7 is an inherently flame-retardant grade exhibiting extremely low flash and fast cycle times. It has excellent electrical properties, high hardness and stiffness. This grade exhibits go..
Linear Mold Shrinkage, Flow 0.00200 - 0.00600 cm/cm
0.00200 - 0.00600 in/in
ISO 294-4
Celanese FORTRON ICE 506L PPS, 40% Glass Reinforced
Fortron ICE 506L is a faster crystallizing version of Fortron 1140L6. It offers essentially the same characteristics of 1140L6 with improved crystallization efficiency for faster cycle times in comp..
Linear Mold Shrinkage, Flow 0.00200 - 0.00600 cm/cm
0.00200 - 0.00600 in/in
ISO 294-4
Celanese FORTRON ICE 714A PPS, 65% Mineral / Glass Reinforced
Fortron ICE 714A is a faster crystallizing version of Fortron 6165A4. It offers similar characteristics to the 6165A4 with improved processing that improves crystallization efficiency and reduces cy..
Linear Mold Shrinkage, Flow 0.00200 - 0.00500 cm/cm
0.00200 - 0.00500 in/in
ISO 294-4
Celanese FORTRON ICE 716A PPS, 65% Mineral / Glass Reinforced
Fortron ICE 716A is a faster crystallizing version of Fortron 6165A6. It offers similar characteristics to the 6165A6 with improved processing that improves crystallization efficiency and reduces c..
Linear Mold Shrinkage, Flow 0.00200 - 0.00500 cm/cm
0.00200 - 0.00500 in/in
ISO 294-4
Celanese FORTRON ICE 716L PPS, 65% Specialty
FORTRON ICE 716L is a 65% glass/mineral filled material that belongs to our new generation of PPS. This new technology allows you to optimize your molding conditions with faster cycle times for comp..
Linear Mold Shrinkage, Flow 0.00200 - 0.00600 cm/cm
0.00200 - 0.00600 in/in
ISO 294-4
Celanese FORTRON MT9140L6 PPS, 40% Medical Technology
Fortron MT9140L6 is a 40% glass fiber reinforced injection molding grade with a low melt viscosity. It exhibits excellent heat and chemical resistance, inherent flame retardancy and shows high hardn..
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese IMPET 2700 GV1/45 (Europe) PET, 45% Glass Reinforced
Polyethylene terephthalate, 45 % glass filled, high flowability, excellent gloss, high modulus, very high heat deflection temperature.Information provided by Celanese
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese IMPET 330R PET, 30% Glass Reinforced
Impet 330R is a 30% glass reinforced injection moldable polyester containing post consumer recycled PET. It provides an excellent combination of strength, stiffness, and high temperature resistance...
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese IMPET 830R PET, 35% Mineral / Glass Reinforced
Impet 830R is a 35% glass/mineral reinforced injection moldable polyester made with recycled PET. It provides an excellent combination of strength, stiffness, warp resistance, and high temperature c..
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese VECTRA A530 LCP, 30% Mineral Reinforced
Best overall surface appearance with properties similar to A130. Less abrasive than glass fiber reinforced grades. Improved toughness over A130. Outstanding hydrolytic stability. Recommended wher..
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese VECTRA A700 LCP, 30% Specialty
Some conductivity. Suitable for electrostatic dissipation (ESD) applications. 30% glass reinforced.Information provided by Celanese
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese VECTRA S471 LCP, 45% Mineral / Glass Reinforced
High flow, High Heat resistance, Low Warpage, for Thick Walled (>0.2mm) or thin (
Linear Mold Shrinkage, Flow 0.00200 - 0.00600 cm/cm
0.00200 - 0.00600 in/in
ISO 294-4
Celanese FORTRON 4332L6 PPS, Mineral / Glass Reinforced
Fortron 4332L6 is a glass fiber/mineral filled injection molding grade, which is intended for applications requiring improved tensile and flexural properties, when compared to other GF/MIN reinforce..
Linear Mold Shrinkage, Flow 0.00200 - 0.00600 cm/cm
0.00200 - 0.00600 in/in
ISO 294-4
Celanese FORTRON MT9140L4 PPS, 40% Medical Technology
Fortron MT 9140L4 is a 40% glass fiber reinforced injection molding grade that exhibits excellent heat and chemical resistance, inherent flame retardancy, and high hardness and rigidity at elevated..
Linear Mold Shrinkage, Flow 0.00200 - 0.00400 cm/cm
0.00200 - 0.00400 in/in
ISO 294-4
Celanese CELANEX 4302 PBT, 30% Glass Reinforced
Celanex 4302 is a 30% glass reinforced PBT designed for improved mold flow, warp resistance and surface appearance.Information provided by Celanese
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese VECTRA A130 LCP, 30% Glass Reinforced
The Standard for the Industry. Excellent balance of properties, including easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties. Suitable for vapo..
Linear Mold Shrinkage, Flow 0.00200 cm/cm
0.00200 in/in
ISO 294-4
Celanese VECTRA C130 LCP, 30% Glass Reinforced
Has the same excellent balance of properties as A130 with higher temperature capability and easier flow. Slightly more dimensional stability in vapor phase soldering than A130. Suitable for some i..
Copyright © lookpolymers.com All Rights Reserved