Wolf Kunststoff ZEDEX® ZX-750V5KF 055 Polymer Alloy. Fiber Reinforced

Category	Polymer , Thermoplastic
Manufacturer	Wolf Kunststoff
Trade Name	ZEDEX®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Wolf Kunststoff ZEDEX® ZX-750V5KF 055 Polymer Alloy. Fiber Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Main Characteristics: Stiff; High elongation and yield stress; Low thermal expansion; Impact resistantApplications: Textile Machinery; Compressors; Hinges; Handling; Machine Tools; Automitve TechnologyInformation provided by Zedex

Physical Properties	Metric	English	Comments
Density	1.53 g/cc	0.0553 lb/in³	ISO 1183
Water Absorption	0.20 % @Temperature 23.0 °C	0.20 % @Temperature 73.4 °F	RMC 93%; DIN EN ISO 62
Moisture Absorption at Equilibrium	0.40 %	0.40 %	DIN EN ISO 62

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	>= 100	>= 100	DIN 53505
Hardness, Shore D	90	90	DIN 53505
Ball Indentation Hardness	160 MPa	23200 psi	DIN 2039
Tensile Strength at Break	93.1 MPa	13500 psi	DIN EN ISO 527
Tensile Strength	93.1 MPa	13500 psi	DIN EN ISO 527
Tensile Stress	44.0 MPa @Strain 1.00 %, Time 3.60e+6 sec	6380 psi @Strain 1.00 %, Time 1000 hour	DIN 53444
Tensile Strength, Yield	61.0 MPa	8850 psi	Elastic Limit
Elongation at Break	6.8 %	6.8 %	Flexural; DIN EN ISO 178
	6.8 %	6.8 %	DIN EN ISO 527
Elongation at Yield	2.4 %	2.4 %	Elastic Yield Point
	4.3 %	4.3 %	Flexural; DIN EN ISO 178
	6.8 %	6.8 %	Elongation at Maximum Force; DIN EN ISO 527
Tensile Modulus	2.48 GPa	360 ksi	DIN EN ISO 527
Flexural Strength	177 MPa	25700 psi	Outer Fiber Stress at 3.5% Outer Fiber Strain; DIN EN ISO 178
	182 MPa	26400 psi	DIN EN ISO 178
	182 MPa	26400 psi	DIN EN ISO 178
Flexural Modulus	8.83 GPa	1280 ksi	DIN EN ISO 178
Compressive Strength	101 MPa	14600 psi	Elastic Limit
	147 MPa	21300 psi	break; DIN EN ISO 604
	147 MPa	21300 psi	DIN EN ISO 604
	61.0 MPa @Time 3.60e+7 sec	8850 psi @Time 10000 hour
	95.0 MPa @Time 360000 sec	13800 psi @Time 100 hour
	108 MPa @Time 36.0 sec	15700 psi @Time 0.0100 hour
	83.0 MPa @Strain 3.50 %	12000 psi @Strain 3.50 %	DIN EN ISO 604
Compressive Modulus	1.95 GPa	283 ksi	DIN EN ISO 604
Fatigue Strength	55.0 MPa @# of Cycles 1.00e+6	7980 psi @# of Cycles 1.00e+6	1 Hz
K Factor (ISO)	0.10 µm/km @Temperature 20.0 °C	0.10 µm/km @Temperature 68.0 °F
	0.70 µm/km @Temperature 100 °C	0.70 µm/km @Temperature 212 °F
	2.2 µm/km @Temperature 200 °C	2.2 µm/km @Temperature 392 °F
	2.9 µm/km @Temperature 240 °C	2.9 µm/km @Temperature 464 °F
Charpy Impact Unnotched	5.90 J/cm²	28.1 ft-lb/in²	EN ISO 179/1eU
Charpy Impact, Notched	1.56 J/cm²	7.42 ft-lb/in²	EN ISO 179/1eA
Coefficient of Friction, Dynamic	0.11 @Temperature 100 °C	0.11 @Temperature 212 °F	Dry Operation
	0.16 @Temperature 20.0 °C	0.16 @Temperature 68.0 °F	Dry Operation
Coefficient of Friction, Static	0.19 @Temperature 20.0 °C	0.19 @Temperature 68.0 °F	Dry Operation
Tensile Creep Modulus, 1000 hours	4320 MPa	627000 psi	At 1% Deformation; DIN 53444
Limiting Pressure Velocity	0.54883 MPa-m/sec	15669 psi-ft/min	v = 1m/min
	0.88333 MPa-m/sec	25219 psi-ft/min	v = 100m/min
	0.933 MPa-m/sec	26600 psi-ft/min	v = 200m/min
	1.415 MPa-m/sec	40400 psi-ft/min	v = 10m/min
Compression Set	4.4 %	4.4 %	Elastic Compression Limit
	10.9 %	10.9 %	Nominal Compressive Strain at Compressive Strength; DIN EN ISO 604
	10.9 %	10.9 %	Nominal Compressive Strain at Break; DIN EN ISO 604

Thermal Properties	Metric	English	Comments
CTE, linear	27.0 µm/m-°C @Temperature <=100 °C	15.0 µin/in-°F @Temperature <=212 °F	ISO E 830
	29.0 µm/m-°C @Temperature <=150 °C	16.1 µin/in-°F @Temperature <=302 °F	ISO E 831
Specific Heat Capacity	1.06 J/g-°C	0.253 BTU/lb-°F	DSC
Melting Point	390 °C	734 °F	DSC
Maximum Service Temperature, Air	250 °C	482 °F	Pressed Bushings
	280 °C	536 °F	Continuous
	320 °C	608 °F	Short Term (3h)
Deflection Temperature at 1.8 MPa (264 psi)	290 °C	554 °F	DIN EN ISO 75
Glass Transition Temp, Tg	240 °C	464 °F	DSC
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	5.00e+6 ohm-cm	5.00e+6 ohm-cm	IEC 93
Surface Resistance	3.00e+6 ohm	3.00e+6 ohm	IEC 93
Dielectric Constant	3.4 @Frequency 110 Hz	3.4 @Frequency 110 Hz	IEC 250
Dielectric Strength	0.100 kV/mm	2.54 kV/in	IEC 243
Dissipation Factor	0.00090	0.00090	IEC 112
	0.080 @Frequency 1.00 Hz	0.080 @Frequency 1.00 Hz

Descriptive Properties	Value	Comments
Alignment Adjustment	3	Nominal Scale: 1, low; 10, high
Chemical Sterilization	10	Nominal Scale: 1, low; 10, high
Color	Green
Creep Resistance	6	Nominal Scale: 1, low; 10, high
Dimensional Stability with Thermal Expansion	10	Nominal Scale: 1, low; 10, high
Free from Silicon	Applicable
Gamma-rays Radiation Sterilization	7	Nominal Scale: 1, low; 10, high
Injection Molded Parts	Applicable
Machined Parts	Applicable
Moist Heat Sterilization	6	Nominal Scale: 1, low; 10, high
Plastic Granules	Applicable
Resistance Against dust, Dirt, Abrasive Substances	5	Nominal Scale: 1, low; 10, high
Resistance Against Hot Water	120
Resistance to Chemicals	5	Nominal Scale: 1, low; 10, high
Resistant Against Disinfectant	Applicable
Rods up to Øe (de)	Applicable
ROHS/WEEE	Applicable
Sheets up to Maximum Thickness	Applicable
Sliding Velocity	350
Suitable for Outdoor Use	9	Nominal Scale: 1, low; 10, high
Suitable for Vacuum	Applicable
Tubes (hollow rods) up to Øe (de)	Applicable
UV Rays Resistance	9	Nominal Scale: 1, low; 10, high

Users viewing this material also viewed the following: