Wolf Kunststoff ZEDEX® ZX-550PV A7A Polymer Alloy

Category	Polymer , Thermoplastic
Manufacturer	Wolf Kunststoff
Trade Name	ZEDEX®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Wolf Kunststoff ZEDEX® ZX-550PV A7A Polymer Alloy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Main Characteristics: Modified friction wear; Tough; Soft; Reduced wear at temperatures at 100 ° CApplications: Chemical Engineering; Laboratory Technology; Automitve Technology; Machine ToolsInformation provided by Zedex

Physical Properties	Metric	English	Comments
Density	1.86 g/cc	0.0672 lb/in³	ISO 1183
Water Absorption	0.020 % @Temperature 23.0 °C	0.020 % @Temperature 73.4 °F	RMC 93%; DIN EN ISO 62
Moisture Absorption at Equilibrium	0.040 %	0.040 %	DIN EN ISO 62

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	>= 100	>= 100	DIN 53505
Hardness, Shore D	60	60	DIN 53505
Ball Indentation Hardness	32.0 MPa	4640 psi	DIN 2039
Tensile Strength at Break	12.0 MPa	1740 psi	DIN EN ISO 527
Tensile Strength	12.0 MPa	1740 psi	DIN EN ISO 527
Tensile Stress	0.600 MPa @Strain 1.00 %, Time 3.60e+6 sec	87.0 psi @Strain 1.00 %, Time 1000 hour	DIN 53444
Tensile Strength, Yield	6.80 MPa	986 psi	Elastic Limit
Elongation at Break	192 %	192 %
	192 %	192 %	DIN EN ISO 527
Elongation at Yield	3.3 %	3.3 %	Flexural; DIN EN ISO 178
	4.2 %	4.2 %	Elastic Yield Point
Tensile Modulus	0.850 GPa	123 ksi	DIN EN ISO 527
Flexural Strength	15.0 MPa	2180 psi	Outer Fiber Stress at 3.5% Outer Fiber Strain; DIN EN ISO 178
	15.0 MPa	2180 psi	DIN EN ISO 178
Flexural Modulus	1.19 GPa	173 ksi	DIN EN ISO 178
Compressive Strength	11.0 MPa	1600 psi	Elastic Limit
	0.800 MPa @Time 3.60e+7 sec	116 psi @Time 10000 hour
	8.00 MPa @Time 360000 sec	1160 psi @Time 100 hour
	10.0 MPa @Time 36.0 sec	1450 psi @Time 0.0100 hour
	19.0 MPa @Strain 3.50 %	2760 psi @Strain 3.50 %	DIN EN ISO 604
Compressive Modulus	1.15 GPa	167 ksi	DIN EN ISO 604
Fatigue Strength	4.00 MPa @# of Cycles 1.00e+6	580 psi @# of Cycles 1.00e+6	1 Hz
K Factor (ISO)	0.60 µm/km @Temperature 20.0 °C	0.60 µm/km @Temperature 68.0 °F
	0.80 µm/km @Temperature 200 °C	0.80 µm/km @Temperature 392 °F
	2.7 µm/km @Temperature 100 °C	2.7 µm/km @Temperature 212 °F
	6.4 µm/km @Temperature 240 °C	6.4 µm/km @Temperature 464 °F
Charpy Impact Unnotched	NB	NB	EN ISO 179/1eU
Charpy Impact, Notched	11.3 J/cm²	53.8 ft-lb/in²	EN ISO 179/1eA
Coefficient of Friction, Dynamic	0.10 @Temperature 20.0 °C	0.10 @Temperature 68.0 °F	Dry Operation
	0.10 @Temperature 100 °C	0.10 @Temperature 212 °F	Dry Operation
Coefficient of Friction, Static	0.17 @Temperature 20.0 °C	0.17 @Temperature 68.0 °F	Dry Operation
Tensile Creep Modulus, 1000 hours	61.0 MPa	8850 psi	At 1% Deformation; DIN 53444
Limiting Pressure Velocity	0.02783 MPa-m/sec	794.5 psi-ft/min	v = 1m/min
	0.100 MPa-m/sec	2860 psi-ft/min	v = 200m/min
	0.20833 MPa-m/sec	5947.8 psi-ft/min	v = 10m/min
	0.43333 MPa-m/sec	12372 psi-ft/min	v = 100m/min
Compression Set	1.4 %	1.4 %	Elastic Compression Limit

Thermal Properties	Metric	English	Comments
CTE, linear	144 µm/m-°C @Temperature <=100 °C	80.0 µin/in-°F @Temperature <=212 °F	ISO E 830
	192 µm/m-°C @Temperature <=150 °C	107 µin/in-°F @Temperature <=302 °F	ISO E 831
Specific Heat Capacity	0.930 J/g-°C	0.222 BTU/lb-°F	DSC
Thermal Conductivity	0.240 W/m-K	1.67 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	323 °C	613 °F	DSC
Maximum Service Temperature, Air	70.0 °C	158 °F	Pressed Bushings
	240 °C	464 °F	Continuous
	260 °C	500 °F	Short Term (3h)
Glass Transition Temp, Tg	-20.0 °C	-4.00 °F	DSC
Flammability, UL94	V-0	V-0
Oxygen Index	75 %	75 %	DIN EN ISO 4589

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+18 ohm-cm	1.00e+18 ohm-cm	IEC 93
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	IEC 93
Dielectric Constant	2.7 @Frequency 110 Hz	2.7 @Frequency 110 Hz	IEC 250
Dielectric Strength	21.0 kV/mm	533 kV/in	IEC 243
Dissipation Factor	0.00030	0.00030	IEC 112
	0.175 @Frequency 1.00 Hz	0.175 @Frequency 1.00 Hz
Comparative Tracking Index	42 V	42 V	IEC 112

Descriptive Properties	Value	Comments
Alignment Adjustment	2	Nominal Scale: 1, low; 10, high
Chemical Sterilization	10	Nominal Scale: 1, low; 10, high
Color	Green
Creep Resistance	1	Nominal Scale: 1, low; 10, high
Dimensional Stability with Thermal Expansion	1	Nominal Scale: 1, low; 10, high
Free from Silicon	Applicable
High Precision Bushings (negative clearance)	Applicable
Machined Parts	Applicable
Moist Heat Sterilization	10	Nominal Scale: 1, low; 10, high
Resistance Against dust, Dirt, Abrasive Substances	2	Nominal Scale: 1, low; 10, high
Resistance Against Hot Water	150
Resistance to Chemicals	9	Nominal Scale: 1, low; 10, high
Resistant Against Disinfectant	Applicable
Rods up to Øe (de)	Applicable
Sheets up to Maximum Thickness	Applicable
Sliding Velocity	150
Suitable for Outdoor Use	10	Nominal Scale: 1, low; 10, high
Suitable for Use in Water	Applicable
Suitable for Vacuum	Applicable
UV Rays Resistance	9	Nominal Scale: 1, low; 10, high
UV-Sterilization	7	Nominal Scale: 1, low; 10, high

Users viewing this material also viewed the following: