- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoseal KLINGERSIL® C-7400 Chemical Resistant Gasketing
Thermoseal KLINGERSIL® C-7400 Chemical Resistant Gasketing
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Thermoseal Inc. |
| Trade Name | KLINGERSIL® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Thermoseal KLINGERSIL® C-7400 Chemical Resistant Gasketing.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Synthetic FiberEPDM BinderModerate Caustics and AcidsGood Oil Swell CharacteristicsExcellent Aging PropertiesGood in Light Duty SteamInformation provided by Thermoseal Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.50 g/cc | 0.0542 lb/in³ | ASTM F1315 |
| Thickness | 1588 microns | 62.52 mil | Thickness tested |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 22.0 kV/mm | 559 kV/in | ASTM D149-95a |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | White/Grey | (Top/Bottom) |
| Compressibility | 7 percent | ASTM F36J |
| Creep Relaxation | 25 percent | 1/32", ASTM F38B |
| Gas Permeability | <0.5 ml/min | DIN 3535/6 |
| Klinger Hot Compression Test | 5 percent | Additional, Thickness Decrease 572°F (300°C), tested at 3,625-psi gasket stress |
| 9 percent | Initial, Thickness Decrease 73°F (23°C), tested at 3,625-psi gasket stress | |
| Leachable Chloride Content | 200 ppm | FSA Method (Typical) |
| Recovery | >50 percent | ASTM F36J |
| Sealability | <0.3 ml/hr | 1/32", ASTM F37A |
| Thickness Increase | 0-15% | ASTM F146 after immersion in ASTM Oil 1, 5h/300°F (149°C) |
| 0-20% | ASTM Fuel A, 5h/73°F (23°C) | |
| 15-30% | ASTM Oil IRM903, 5h/300°F (149°C) | |
| 5-20% | ASTM Fuel B, 5h/73°F (23°C) | |
| Weight Increase | <25% | ASTM F146 after immersion in Fuel B 5h/73°F (23°C) |
Users viewing this material also viewed the following:
- Omya OMYACARB® 8 - LU Calcium Carbonate
- DuPont Performance Polymers Crastin® S600F20 NC010 PBT (Unverified Data**)
- Malvern Minerals Novakup® 325 Surface-Treated Lamellar Quartz Filler/Extender
- Gromax BTQ50-EQ00N1 Nylon 6, Impact Modified (Conditioned)
- Silikony Polskie Polsil OM 3000 Methyl Silicone Fluid
- ExxonMobil Bicor® 75 CSR-2 OPP Film
- Arkema Group Orgalloy® RS 6635 A Polyamide 6.6 Alloy 35% Glass Fiber reinforced
- Unipetrol Iso Butanol Synthetic
- P & P Technology MW Series Conductive Fabric
Copyright © lookpolymers.com All Rights Reserved