Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
Manufacturer | Techmer ES |
Trade Name | Luriblend® |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Techmer ES Luriblend® TPX-HDPE-99018.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.941 g/cc | 0.0340 lb/in³ | ASTM D792 |
Water Absorption | 0.070 % @Time 86400 sec |
0.070 % @Time 24.0 hour |
ASTM D570 |
Linear Mold Shrinkage, Flow | 0.022 cm/cm @Thickness 3.17 mm |
0.022 in/in @Thickness 0.125 in |
ASTM D955 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Hardness, Rockwell R | 66 | 66 | ASTM D785 |
Tensile Strength | 32.4 MPa | 4700 psi | ASTM D638 |
Elongation at Yield | 80 % | 80 % | ASTM D638 |
Flexural Yield Strength | 48.3 MPa | 7000 psi | ASTM D790 |
Flexural Modulus | 0.896 GPa | 130 ksi | ASTM D790 |
Izod Impact, Notched | NB @Thickness 3.17 mm |
NB @Thickness 0.125 in |
ASTM D256 |
Coefficient of Friction, Dynamic | 0.027 | 0.027 | ASTM D1894 |
Coefficient of Friction, Static | 0.019 | 0.019 | ASTM D1894 |
K (wear) Factor | 121 x 10-8 mm³/N-M | 60.0 x 10-10 in³-min/ft-lb-hr | |
Limiting Pressure Velocity | 0.0876 MPa-m/sec | 2500 psi-ft/min | 1000 fpm |
0.105 MPa-m/sec | 3000 psi-ft/min | 10 fpm | |
0.175 MPa-m/sec | 5000 psi-ft/min | 100 fpm | |
Abrasion | 31 @Time 86400 sec |
31 @Time 24.0 hour |
Sand Slurry |
40 @Time 173000 sec |
40 @Time 48.0 hour |
1750 rpm, Sand Slurry |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear, Parallel to Flow | 95.4 µm/m-°C | 53.0 µin/in-°F | ASTM D696 |
Deflection Temperature at 0.46 MPa (66 psi) | 93.3 °C | 200 °F | Unannealed; ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 54.4 °C | 130 °F | Unannealed; ASTM D648 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |