- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylsulfone (PPSU)
- Techmer ES HiFill® PPSU A1 0200 B LE
Techmer ES HiFill® PPSU A1 0200 B LE
| Category | Polymer , Thermoplastic , Polyphenylsulfone (PPSU) |
| Manufacturer | Techmer ES |
| Trade Name | HiFill® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill® PPSU A1 0200 B LE.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFeatures: High Density and Low ExtractablesAppearance: OpaqueInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.00 g/cc | 0.0723 lb/in³ | ASTM D792 |
| Water Absorption | 0.30 % @Time 86400 sec |
0.30 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm @Thickness 3.17 mm |
0.0050 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | ASTM D785 |
| Tensile Strength, Yield | 62.1 MPa | 9000 psi | ASTM D638 |
| Elongation at Break | 2.5 % | 2.5 % | ASTM D638 |
| Flexural Strength | 109 MPa | 15800 psi | ASTM D790 |
| Flexural Modulus | 3.03 GPa | 440 ksi | ASTM D790 |
| Izod Impact, Notched | 0.641 J/cm @Thickness 3.17 mm |
1.20 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 72.0 µm/m-°C | 40.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 209 °C | 408 °F | Unannealed; ASTM D648 |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Strength | 18.9 kV/mm | 480 kV/in | Method A (Short-Time); ASTM D149 |
Users viewing this material also viewed the following:
- Osprey Metals M2 Tool Steel Powder (Grade 90% - 16)
- Ineos Nova 731G High Impact Polystyrene (discontinued **)
- Sylvin Technologies 9077-80 Natural PVC for Injection Molding
- Polyram PlusTek PA602 Nylon 6.6, Heat Stabilized
- Polyram PlusTek RA334G6 Nylon 6.6, 30% Glass Fiber
- Covestro Makrolon® AG2677 Polycarbonate
- BCC Products BC 32 Fibrous Glass
- 3M Scotch-Weld™ DP420 Off-White Epoxy Adhesive
- E-Polymers EFLEX® M100 Ethylene Octene Copolymer
Copyright © lookpolymers.com All Rights Reserved