Techmer ES HiFillÂ® HDPE TM20 UV BK 20% Talc Filled

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer	Techmer ES
Trade Name	HiFill®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Techmer ES HiFillÂ® HDPE TM20 UV BK 20% Talc Filled.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Availability: North AmericaForms: PelletsFiller/Reinforcement: Talc Filler, 20% Filler by WeightAdditive: UV StabilizerFeatures: Good UV ResistanceAppearance: BlackInformation provided by TP Composites, Inc.

Physical Properties	Metric	English	Comments
Density	1.12 g/cc	0.0405 lb/inÂ³	ASTM D792
Water Absorption	0.020 % @Time 86400 sec	0.020 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.020 cm/cm @Thickness 3.17 mm	0.020 in/in @Thickness 0.125 in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	50	50	ASTM D785
Tensile Strength, Yield	26.2 MPa	3800 psi	ASTM D638
Elongation at Break	15 %	15 %	ASTM D638
Flexural Strength	379 MPa	55000 psi	ASTM D790
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790
Izod Impact, Notched	0.320 J/cm @Thickness 3.17 mm	0.600 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Unnotched	3.74 J/cm @Thickness 3.17 mm	7.00 ft-lb/in @Thickness 0.125 in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	88.2 Âµm/m-Â°C	49.0 Âµin/in-Â°F	ASTM D696
Melting Point	135 Â°C	275 Â°F
Deflection Temperature at 0.46 MPa (66 psi)	62.8 Â°C	145 Â°F	Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	46.1 Â°C	115 Â°F	Unannealed; ASTM D648

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Dielectric Strength	22.0 kV/mm	560 kV/in	Method A (Short-Time); ASTM D149

Users viewing this material also viewed the following: