TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 6.0 PHR MBTS

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 6.0 PHR MBTS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and many other high performance polyurethane applications. Millathane 76 can be vulcanized by sulfur or peroxide cured systems.The combination of thiazole accelerators, MBTS and MBT, enable the best possible cure for Millathane® 76. An increase in MBTS results in a higher state of cure and increased processing safety.An increase in MBT decreases scorch time and increases the state of cure.All information provided by TSE Industries

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	69	69
Tensile Strength, Yield	32.0 MPa	4640 psi
Elongation at Yield	515 %	515 %
100% Modulus	0.00403 GPa	0.585 ksi
200% Modulus	0.009480 GPa	1.375 ksi
300% Modulus	0.0164 GPa	2.38 ksi
Tear Strength	61.3 kN/m	350 pli	Die C
Compression Set	29.7 % @Temperature 70.0 °C, Time 79200 sec	29.7 % @Temperature 158 °F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	4.40 min @Temperature 155 °C	0.0733 hour @Temperature 311 °F	ts2
	10.8 min @Temperature 155 °C	0.180 hour @Temperature 311 °F	TC90

Users viewing this material also viewed the following: