- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyester, TP
- Polybutylene Terephthalate (PBT)
- Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled
- Shinkong Synthetic Fibers Shinite® E202G30 PBT, 30% Glass Filled
Shinkong Synthetic Fibers Shinite® E202G30 PBT, 30% Glass Filled
| Category | Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled |
| Manufacturer | Shinkong Synthetic Fibers Corp |
| Trade Name | Shinite® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Shinkong Synthetic Fibers Shinite® E202G30 PBT, 30% Glass Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information from Shinkong Synthetic Fibers Corp.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.61 g/cc | 1.61 g/cc | ASTM D792 |
| Water Absorption | 0.070 % | 0.070 % | ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0020 - 0.0040 cm/cm | 0.0020 - 0.0040 in/in | ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0050 - 0.0090 cm/cm | 0.0050 - 0.0090 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 127 MPa | 18500 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
| Flexural Yield Strength | 196 MPa | 28400 psi | ASTM D790 |
| Flexural Modulus | 9.12 GPa | 1320 ksi | ASTM D790 |
| Izod Impact, Notched | 0.883 J/cm @Thickness 3.17 mm, Temperature 23.0 °C |
1.65 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.0 | 4.0 | ASTM D150 |
| Dielectric Strength | 33.0 kV/mm | 838 kV/in | ASTM D149 |
Users viewing this material also viewed the following:
- Formosa Plastics Formolene® LH5326 Injection Molding HDPE (discontinued **)
- Johnson Matthey GW Platinum w/ 5% Copper Jewelry Alloy
- Techmer ES Luriblend® PA6/6 GF30 TL5 30% Glass Filled
- Styron DL 242NA Functionalized SB
- SABIC Innovative Plastics LNP Verton RV008ESV PA 66
- Loctite® SpeedBonder™ 326 Fast Fixture Acrylic Bonding Adhesive
- ChevronTexaco 220 PMO ashless
- Addiplast Addinyl A2 V15 Nylon 66, 15% Glass Filled
- Advanced Polymer Alloys Alcryn® 2250 UT Melt Processable Rubber
- 3M Tartan™ 302 Box Sealing Tape
Copyright © lookpolymers.com All Rights Reserved