- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Molded
- Sylvin Technologies 9812A-70 Natural PVC for Injection Molding
Sylvin Technologies 9812A-70 Natural PVC for Injection Molding
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Molded |
| Manufacturer | Sylvin Technologies |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sylvin Technologies 9812A-70 Natural PVC for Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Sylvin Technologies Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.38 g/cc | 1.38 g/cc | |
| Thickness | 1000 microns | 39.4 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 70 | 70 | 10 seconds |
| Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | |
| Elongation at Break | 375 % | 375 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 50.0 °C | 122 °F | RTI |
| Flammability, UL94 | V-2 | V-2 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 160 - 171 °C | 320 - 340 °F |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics EXTEM VH1003M PEI Copolymer (Europe-Africa-Middle East)
- Arlon A3015-R004-12 0.015" (0.381 mm) Cured Fusible Silicone Rubber with Sinusoidal Fiberglass Substrate
- Greene Tweed CHEMRAZ® 570 Perfluoroelastomer
- Dow VORANOL™ 4701C Polyether Polyol
- 3M Scotch-Weld™ PR5 Plastic and Rubber Instant Adhesive
- Dielectric Polymers NT-582 Plating Tape (discontinued **)
- A. Schulman POLYFORT™ FPP 1876 22% Mineral Filled Copolymer, UV Inhibited Polypropylene
- Owens Corning Glass Fiber Reinforced Polyphenylene Oxide (PPO), 20 wt.% glass
Copyright © lookpolymers.com All Rights Reserved