- HOME
- POLYMER SEARCH
- Thermoset
- Phenolic
- Phenolic, Novolac, Glass Filled
- Sumitomo Bakelite Sumikon® PM-9610 Glass-Filled Phenolic, Compression Grade
Sumitomo Bakelite Sumikon® PM-9610 Glass-Filled Phenolic, Compression Grade
| Category | Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic , Phenolic, Novolac, Glass Filled |
| Manufacturer | Sumitomo Bakelite High Peformance Plastics |
| Trade Name | Sumikon® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sumitomo Bakelite Sumikon® PM-9610 Glass-Filled Phenolic, Compression Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Sumikon PM-9610 is a two stage glass fiber and mineral filled black phenolic special purpose molding compound. It is especially designed for applications requiring high strength and higher dimensional stability with excellent heat resistance. Typical applications include brush holders for high temperature, and timing pulleys.Information provided by Sumitomo Bak North America, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.02 g/cc | 2.02 g/cc | ASTM D792 |
| Bulk Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D1895 |
| Water Absorption | 0.030 % | 0.030 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM D6289 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 90.0 MPa | 13100 psi | ASTM D638 |
| Tensile Modulus | 25.5 GPa | 3700 ksi | ASTM D638 |
| Flexural Strength | 131 MPa | 19000 psi | ASTM D790 |
| Compressive Strength | 241 MPa | 35000 psi | ASTM D695 |
| Izod Impact, Notched | 0.214 J/cm | 0.401 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.9 @Frequency 1e+6 Hz |
4.9 @Frequency 1e+6 Hz |
ASTM D150 |
| 5.0 @Frequency 1000 Hz |
5.0 @Frequency 1000 Hz |
ASTM D150 | |
| 5.1 @Frequency 60 Hz |
5.1 @Frequency 60 Hz |
ASTM D150 | |
| Dielectric Strength | 9.84 kV/mm | 250 kV/in | Step by Step; ASTM D149 |
| 15.0 kV/mm | 380 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.030 @Frequency 1000 Hz |
0.030 @Frequency 1000 Hz |
ASTM D150 |
| 0.030 @Frequency 1e+6 Hz |
0.030 @Frequency 1e+6 Hz |
ASTM D150 | |
| 0.040 @Frequency 60 Hz |
0.040 @Frequency 60 Hz |
ASTM D150 |
Users viewing this material also viewed the following:
- Murtfeldt Material ”S”® 1000 RB Polyethylene, High Friction
- SABIC Innovative Plastics Cycolac® EX58F ABS (Europe-Africa-Middle East)
- SABIC Innovative Plastics Lexan® 945AU PC (Asia Pacific)
- Michelman® Michem® Emulsion 45745P Nonionic Polyethylene wax emulsion
- Lubriplate SYN LUBE 150 PAO-Based Multi-Purpose Synthetic Fluid
- Freudenberg Simrit N466 Nitrile Elastomer (NBR)
- SABIC Innovative Plastics LNP THERMOCOMP ZFM3314 PPE (Europe-Africa-Middle East)
- Universal Wire Works 430 Stainless Steel Electrode
- ACC MM903 Condensation Cure 2-Part Molding Rubber
- Teknor Apex APEX® 80118-Y Polyvinyl Chloride, Flexible
Copyright © lookpolymers.com All Rights Reserved