- HOME
- POLYMER SEARCH
- Thermoset
- Phenolic
- Sumitomo Bakelite Durez® 31735 Phenolic, Injection Grade
Sumitomo Bakelite Durez® 31735 Phenolic, Injection Grade
| Category | Polymer , Thermoset , Phenolic |
| Manufacturer | Sumitomo Bakelite High Peformance Plastics |
| Trade Name | Durez® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sumitomo Bakelite Durez® 31735 Phenolic, Injection Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Durez 31735 is a special purpose phenolic molding compound developed for automotive and industrial pulleys. This material is designed to optimize pulley performance relating to belt life, dimensional tolerance, impact strength, and other properties required in pulley applications.Information provided by Sumitomo Bak North America, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.43 g/cc | 0.0517 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.490 g/cc | 0.0177 lb/in³ | ASTM D1895 |
| Water Absorption | 0.50 % | 0.50 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0090 cm/cm | 0.0090 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 52.0 MPa | 7540 psi | ASTM D638 |
| Tensile Modulus | 6.90 GPa | 1000 ksi | ASTM D638 |
| Flexural Strength | 86.0 MPa | 12500 psi | |
| Compressive Strength | 207 MPa | 30000 psi | ASTM D695 |
| Izod Impact, Notched | 0.214 J/cm | 0.401 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 36.0 µm/m-°C @Temperature 30.0 - 150 °C |
20.0 µin/in-°F @Temperature 86.0 - 302 °F |
|
| Specific Heat Capacity | 1.17 J/g-°C | 0.280 BTU/lb-°F | |
| Thermal Conductivity | 0.370 W/m-K | 2.57 BTU-in/hr-ft²-°F | Cenco Fitch |
| Deflection Temperature at 1.8 MPa (264 psi) | 163 °C | 325 °F | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 5.1 @Frequency 1e+6 Hz |
5.1 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 11.8 kV/mm | 300 kV/in | Step by step; ASTM D149 |
| 12.8 kV/mm | 325 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.050 @Frequency 1e+6 Hz |
0.050 @Frequency 1e+6 Hz |
ASTM D150 |
Users viewing this material also viewed the following:
- Premix Thermoplastics PRE-ELEC® PE 1299 Conductive Thermoplastic Compound
- Eastman Eastar GN101 PETG Copolyester (discontinued **)
- Resin Technology Group Fusion Cyanoacrylate Primer
- ExxonMobil Mobil Nyvac FR 200D
- Dow Corning SILASTIC® LS 5-8725 FLUOROSILICONE RUBBER
- Chevron Phillips MarFlex® D139FK Metallocene Linear Low Density Polyethylene, Blown Film
- Aclo Accutech Polypropylene Homopolymer HP0334G25M5CL Glass/Mineral Reinforced Coupled
- BASF Pluracol® 4850 Slabstock HR & Molded Graft Polyol
- Atom Adhesives AA-BOND F131 Epoxy Adhesive
- E-Polymers SEPAZ® C140GM 40% Glass Fiber/Mineral Reinforced LCP Resin
Copyright © lookpolymers.com All Rights Reserved