- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LLDPE
- NIZHNEKAMSKNEFTEKHIM PE 4116N (16401) Linear Low Density Polyethylene
NIZHNEKAMSKNEFTEKHIM PE 4116N (16401) Linear Low Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LLDPE |
| Manufacturer | NIZHNEKAMSKNEFTEKHIM Inc |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | NIZHNEKAMSKNEFTEKHIM PE 4116N (16401) Linear Low Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.914 - 0.918 g/cc | 0.0330 - 0.0332 lb/in³ | Base Resin; ASTM D1505 |
| Melt Flow | 0.80 - 1.2 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.80 - 1.2 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1283/L |
| 24 - 36 g/10 min @Load 21.6 kg, Temperature 190 °C |
24 - 36 g/10 min @Load 47.6 lb, Temperature 374 °F |
Flow@21.6kg/Flow@2.16kg ratio < 30; ASTM D1283 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Film Tensile Strength at Yield, MD | >= 40.0 MPa | >= 5800 psi | ASTM D882 |
| Film Tensile Strength at Yield, TD | >= 32.0 MPa | >= 4640 psi | ASTM D882 |
| Film Elongation at Break, MD | >= 700 % | >= 700 % | ASTM D882 |
| Film Elongation at Break, TD | >= 800 % | >= 800 % | ASTM D882 |
| Tensile Modulus | >= 0.120 GPa | >= 17.4 ksi | 2% sec, MD; ASTM D882 |
| >= 0.130 GPa | >= 18.9 ksi | 2% sec, TD; ASTM D882 | |
| Elmendorf Tear Strength, MD | >= 6.30 g/micron | >= 160 g/mil | ASTM D1922 |
| Elmendorf Tear Strength, TD | >= 15.4 g/micron | >= 390 g/mil | ASTM 1922 |
| Dart Drop Test | >= 110 g | >= 0.243 lb | ASTM D1709 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Gel Content (pcs./m²) | 0 | > 1mm |
| 245 | (0.2-0.5)mm | |
| 250 | > 0.2mm (totally) | |
| 5 | (0.5-1.0)mm |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® D 5302 ELF Black TPO Thermoplastic Polyolefin Elastomer
- A. Schulman INVISION™ VX-5075UI Soft Touch Polyolefin Thermoplastic
- A. Schulman POLYTROPE™ TPP 512 Injection Molding Grade Olefinic Thermoplastic Elastomer
- A. Schulman SCHULAMID® 66 GF30H 30% Glass Fiber Reinforced, Heat Stabilized Nylon 66
- Elastocon TPE Technologies Elastocon® 2865PE Thermoplastic Elastomer
- CPC - Vycom CELTEC MARINE™ Expanded Foam PVC Polyvinyl Chloride
- Diamond Polymers ASA/PC AP-640
- 3M Scotch® 2525 Performance Flatback Tape
Copyright © lookpolymers.com All Rights Reserved