- HOME
- POLYMER SEARCH
- Superalloy
- Special Metals INCONEL® Alloy 600
Special Metals INCONEL® Alloy 600
| Category | Metal , Nonferrous Metal , Nickel Alloy , Superalloy |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | INCONEL® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals INCONEL® Alloy 600.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.47 g/cc | 0.306 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 655 MPa | 95000 psi | Annealed |
| 550 MPa @Temperature 550 °C |
79800 psi @Temperature 1020 °F |
Annealed prior to test | |
| Tensile Strength, Yield | 310 MPa | 45000 psi | Annealed |
| 180 MPa @Temperature 550 °C |
26100 psi @Temperature 1020 °F |
Annealed prior to test | |
| Elongation at Break | 45 % | 45 % | Annealed prior to test. |
| 42 % @Temperature 550 °C |
42 % @Temperature 1020 °F |
Annealed prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 13.3 µm/m-°C @Temperature 20.0 - 100 °C |
7.39 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Specific Heat Capacity | 0.444 J/g-°C | 0.106 BTU/lb-°F | |
| Thermal Conductivity | 14.9 W/m-K | 103 BTU-in/hr-ft²-°F | |
| Melting Point | 1354 - 1413 °C | 2469 - 2575 °F | |
| Solidus | 1354 °C | 2469 °F | |
| Liquidus | 1413 °C | 2575 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.15 % | <= 0.15 % | |
| Chromium, Cr | 14 - 17 % | 14 - 17 % | |
| Copper, Cu | <= 0.50 % | <= 0.50 % | |
| Iron, Fe | 6.0 - 10 % | 6.0 - 10 % | |
| Manganese, Mn | <= 1.0 % | <= 1.0 % | |
| Nickel, Ni | >= 72 % | >= 72 % | Including Cobalt |
| Silicon, Si | <= 0.50 % | <= 0.50 % | |
| Sulfur, S | <= 0.015 % | <= 0.015 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000103 ohm-cm | 0.000103 ohm-cm | |
| Magnetic Permeability | 1.01 | 1.01 | at 200 oersted (15.9 kA/m) |
| Curie Temperature | -194 °C | -317 °F |
Users viewing this material also viewed the following:
- PolyOne Edgetek® AS-40GF/000 Acrylonitrile Butadiene Styrene (ABS), Glass Filled (discontinued **)
- Minelco FireCarb TEG-265 Expandable Graphite
- LATI Kelon® B H CETG/300 PA 6, Glass/Mineral Reinforced, Heat Stabilized
- SABIC Innovative Plastics LNP LUBRICOMP KL001 Acetal Copolymer (Asia Pacific)
- Teknor Apex Monprene® MP-2664B Thermoplastic Elastomer
- A. Schulman POLYFORT™ FPP 809 Talc Filled Homopolymer Polypropylene
- Total Lumicene® mPE M 4707 EP Metallocene Polyethylene, Blown Film
- Ensinger TECASINT 4011 Polyimide, Yellow (PI)
- Teknor Apex APEX® 2095-H Polyvinyl Chloride, Flexible
Copyright © lookpolymers.com All Rights Reserved