- HOME
- POLYMER SEARCH
- Austenitic
- Special Metals INCOLOY® alloy 028 Austenitic Stainless Steel
Special Metals INCOLOY® alloy 028 Austenitic Stainless Steel
| Category | Metal , Ferrous Metal , Austenitic , Stainless Steel |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | INCOLOY® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals INCOLOY® alloy 028 Austenitic Stainless Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
INCOLOY® alloy 028 (UNS N08028/W. Nr. 1.4563) is a highly alloyed austenitic stainless steel offering resistance to a variety of corrosive media. By virtue of its contents of chromium and molybdenum, the alloy offers resistance to both oxidizing and reducing acids and salts. The presence of copper increases its resistance to sulfuric acid. The alloy is used in the chemical and petrochemical processing industry. Alloy tubes are cold worked to high strength levels for downhole service in moderately corrosive deep sour gas wells.Information Provided by Special Metals Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.00 g/cc | 0.289 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell B | 80 - 90 | 80 - 90 | Annealed |
| Hardness, Rockwell C | 33 | 33 | Cold Worked |
| Tensile Strength at Break | 500 MPa | 72500 psi | Annealed |
| 896 MPa | 130000 psi | Cold Worked | |
| Tensile Strength, Yield | 214 MPa | 31000 psi | Annealed |
| 758 MPa | 110000 psi | Cold Worked | |
| Elongation at Break | 15 % | 15 % | Cold Worked |
| 40 % | 40 % | Annealed | |
| Modulus of Elasticity | 200 GPa @Temperature 23.0 °C |
29000 ksi @Temperature 73.4 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.0 µm/m-°C @Temperature 93.0 °C |
8.33 µin/in-°F @Temperature 199 °F |
|
| 15.9 µm/m-°C @Temperature 260 °C |
8.83 µin/in-°F @Temperature 500 °F |
||
| 16.8 µm/m-°C @Temperature 427 °C |
9.33 µin/in-°F @Temperature 801 °F |
||
| Specific Heat Capacity | 0.450 J/g-°C @Temperature 100 °C |
0.108 BTU/lb-°F @Temperature 212 °F |
|
| Thermal Conductivity | 11.4 W/m-K @Temperature 23.0 °C |
79.1 BTU-in/hr-ft²-°F @Temperature 73.4 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.030 % | <= 0.030 % | |
| Chromium, Cr | 26 - 28 % | 26 - 28 % | |
| Copper, Cu | 0.60 - 1.4 % | 0.60 - 1.4 % | |
| Iron, Fe | 29.01 - 40.4 % | 29.01 - 40.4 % | Balance |
| Manganese, Mn | <= 2.5 % | <= 2.5 % | |
| Molybdenum, Mo | 3.0 - 4.0 % | 3.0 - 4.0 % | |
| Nickel, Ni | 30 - 34 % | 30 - 34 % | |
| Phosphorous, P | <= 0.030 % | <= 0.030 % | |
| Silicon, Si | <= 1.0 % | <= 1.0 % | |
| Sulfur, S | <= 0.030 % | <= 0.030 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000990 ohm-cm @Temperature 23.0 °C |
0.0000990 ohm-cm @Temperature 73.4 °F |
Users viewing this material also viewed the following:
- Techmer ES Elastoblend® PA6 IM HS L BK
- Shinil Chemical SHINSTRA PC/ABS SCV2030 Structural Polymer Housing
- A. Schulman POLYFORT™ FPP 1285U Glass Filled, UV Stable Impact Copolymer Polypropylene
- Eastman DuraStar DS1910HF Polymer, Natural
- BASF Ultramid® A3UG5 BK 23260 25% Glass Filled PA66 (Conditioned)
- AK Steel 316 Austenitic Stainless steel
- E-Polymers EFLEX® M300 HDPE
- DuPont Teijin Films Melinex® 457 Polyester Film, 200 Gauge
- Polyram RamSter PF321G4 PBT, 20% Glass Fiber, Flame Retardant
Copyright © lookpolymers.com All Rights Reserved