- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoseal KLINGERSIL® C-4439 Metal Reinforced Gasketing
Thermoseal KLINGERSIL® C-4439 Metal Reinforced Gasketing
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Thermoseal Inc. |
| Trade Name | KLINGERSIL® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Thermoseal KLINGERSIL® C-4439 Metal Reinforced Gasketing.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fiberglass, Aramid & Inorganic FibersNitrile BinderHigh Temperature & StressVibrationGalvanized Low Carbon Steel InsertInformation provided by Thermoseal Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.10 g/cc | 0.0759 lb/in³ | ASTM F1315 |
| Thickness | 1588 microns | 62.52 mil | Thickness tested |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 10.0 kV/mm | 254 kV/in | ASTM D149-95a |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Red | (Top/Bottom) |
| Compressibility | 8 percent | ASTM F36J |
| Creep Relaxation | 20 percent | 1/32", ASTM F38B |
| Klinger Hot Compression Test | 4 percent | Additional, Thickness Decrease 572°F (300°C) |
| 8 percent | Initial, Thickness Decrease 73°F (23°C) | |
| Leachable Chloride Content | 150 ppm | FSA Method (Typical) |
| Recovery | >50 percent | ASTM F36J |
| Thickness Increase | 0-5% | ASTM F146 after immersion in ASTM Oil 1, 5h/300°F (149°C) |
| 0-5% | ASTM Oil IRM903, 5h/300°F (149°C) | |
| 0-5% | ASTM Fuel A, 5h/73°F (23°C) | |
| 5-10% | ASTM Fuel B, 5h/73°F (23°C) | |
| Weight Increase | <9% | ASTM F146 after immersion in Fuel B 5h/73°F (23°C) |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 6 GF 30 LS Polyamide 6, 30% Glass Fiber, UV Stabilization
- Plastcom SLOVAMID 66 GF 45 PA66, 45% glass fibre
- LATI Larpeek 50 K/30 PEEK, 30% Carbon Fiber Reinforced
- Lord Adhesives Chemlok® 607 Adhesive
- Solvay Chemicals CASO® Granular Anhydrous Calcium Chloride >94%
- UBE UBEPOL BR15HB HIPS (n-DM =0.03 wt %)
- Master Bond EP30P Epoxy Bonds Glass, Polycarbonates and Acrylics
- Plastics Group Polifil® 628-13GF Glass Fiber-Reinforced Nylon 6/6 (DAM)
- ExxonMobil LDPE LD 317.09 Low Density Polyethylene Resin
- BNZ Materials Blazecrete 2600 Dense Castable
Copyright © lookpolymers.com All Rights Reserved