- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 30% Glass Fiber Filled
- Solvay TECHNYL® A 218G1 V30 Black 34N PA66, 30% glass fiber, Conditioned
Solvay TECHNYL® A 218G1 V30 Black 34N PA66, 30% glass fiber, Conditioned
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
| Manufacturer | Solvay |
| Trade Name | Technyl® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay TECHNYL® A 218G1 V30 Black 34N PA66, 30% glass fiber, Conditioned.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Polyamide 66, reinforced with 30% of glass fiber, for injection molding. This grade shows an improved retention of properties after long term ageing in automotive cooling liquids. For 700 hours' ageing at 132 °C and pressure of 2 bars in water glycol environment, impact properties are increased by 50% in comparison with standard glycol grade TECHNYL A218 V30 black 34NG.Available in: Asia Pacific and Latin AmericaProduct Applications: TECHNYL® A 218 G1 V30 BLACK 34N is particularly recommended for the injection molding of parts in permanent contact with cooling liquids in cars, such as: cooling and heating radiator systems, header tanks, thermostat components, inlet / outlet pipes. This product is available in black.Information provided by Rhodia, Rhodia has been acquired by Solvay.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.37 g/cc | 0.0495 lb/in³ | ISO 1183/A |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 140 MPa | 20300 psi | ISO 527 Type 1A |
| Elongation at Break | 4.0 % | 4.0 % | ISO 527 Type 1A |
| Tensile Modulus | 7.50 GPa | 1090 ksi | ISO 527 Type 1A |
| Flexural Strength | 185 MPa | 26800 psi | ISO 178 |
| Flexural Modulus | 6.40 GPa | 928 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 15.0 kJ/m² | 7.14 ft-lb/in² | ISO 180/1eA |
| Charpy Impact Unnotched | 10.0 J/cm² | 47.6 ft-lb/in² | ISO 179/1eU |
| Charpy Impact, Notched | 1.50 J/cm² | 7.14 ft-lb/in² | ISO 179/1eA |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
| Dielectric Strength | 29.0 kV/mm | 737 kV/in | IEC 60243 |
| Dissipation Factor | 0.11 | 0.11 | IEC 60250 |
| Comparative Tracking Index | 600 V | 600 V | Solution A; IEC 60112 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Moisture Content | <= 0.20 % | <= 0.20 % |
Users viewing this material also viewed the following:
- Eastman 18BOA Polyethylene (discontinued **)
- Huntsman Araldite GT 7097 US Bisphenol A Epoxy Solid Resin
- Lucas-Milhaupt BRAZE 051 Silver Based Cadmium Free Filler Metal
- LyondellBasell Hostacomâ„¢ TRC704D Thermoplastic Polyolefin Elastomer
- Solvay GEROPON® T-22 A Surfactant
- SABIC Innovative Plastics NORYL PX1265 PPE+PS
- Braskem RP 144 Coating Polypropylene
- Arlon 51146R015 Silicone Rubber/Fiberglass Laminate
- Aremco Corr-Paint™ CP4050-S High Temperature Protective Coating Silicone-Polyester
- Tra-Con Tra-Duct 2921 Silver-Filled Adhesive
Copyright © lookpolymers.com All Rights Reserved