- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 40% Glass Fiber Filled
- Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, Conditioned
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, Conditioned
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 40% Glass Fiber Filled |
| Manufacturer | Solvay |
| Trade Name | Technyl® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, Conditioned.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Polyamide 66, reinforced with 40% of glass spheres, for injection molding.Available in: EuropeProduct Applications: TECHNYL ® A 216 S40 is used in all sectors of industry, offering an excellent combination between thermal and mechanical properties. This grade is recommended for mechanical components which require a very good surface finish with low warpage, and good compression strength. This product is available in natural, black, and in special colors on request.Information provided by Rhodia, Rhodia has been acquired by Solvay.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.47 g/cc | 0.0531 lb/in³ | ISO 1183/A |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 50.0 MPa | 7250 psi | ISO 527 Type 1A |
| Tensile Strength, Yield | 55.0 MPa | 7980 psi | ISO 527 type 1 A |
| Elongation at Break | 35 % | 35 % | ISO 527 Type 1A |
| Elongation at Yield | 20 % | 20 % | ISO 527 type 1 A |
| Tensile Modulus | 3.00 GPa | 435 ksi | ISO 527 Type 1A |
| Flexural Strength | 75.0 MPa | 10900 psi | ISO 178 |
| Flexural Modulus | 2.45 GPa | 355 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 7.00 kJ/m² | 3.33 ft-lb/in² | ISO 180/1A |
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU |
| Charpy Impact, Notched | 0.750 J/cm² | 3.57 ft-lb/in² | ISO 179/1eA |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | IEC 60093 |
| Surface Resistance | 5.00e+10 ohm | 5.00e+10 ohm | IEC 60093 |
| Dielectric Strength | 26.0 kV/mm | 660 kV/in | IEC 60243 |
| Dissipation Factor | 0.11 | 0.11 | IEC 60250 |
| Comparative Tracking Index | 500 V | 500 V | Solution A; IEC 60112 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Moisture Content | <= 0.20 % | <= 0.20 % |
Users viewing this material also viewed the following:
- Plastcom PLASTAMID® 66 GF 15 T 15 TS PA66 reinforced with glass fibers and mineral filler, heat stabilized
- PolyOne Stat-Tech™ NN-30CF/000 Black Polyamide 66 (Nylon 66)
- Chengdu Polyster H6555 Thermoplastic Polyether-ester Elastomer (TPEE)
- Dow Corning P5200 ADHESION PROMOTER, CLEAR
- Chosun Refractories CRS-A60 Blast Furnace Tap-Hole Refractory
- DuPont Teijin Films Melinex® 437 Polyester Film, 200 Gauge
- ConocoPhillips Hydroclear Diamond Class® 32 Turbine Oil
Copyright © lookpolymers.com All Rights Reserved