Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF)  (Unverified Data**)

Category Polymer , Thermoplastic , Fluoropolymer , PVDF , Polyvinylidinefluoride (PVDF), Molded/Extruded
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF)  (Unverified Data**).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Information provided by Solvay Specialty Polymers.
Physical Properties Metric English Comments
Specific Gravity 1.75 - 1.80 g/cc
1.75 - 1.80 g/cc
ASTM D792
Water Absorption <= 0.040 %

@Temperature 23.0 °C,
Time 86400 sec
 <= 0.040 %

@Temperature 73.4 °F,
Time 24.0 hour
 ASTM D570
Linear Mold Shrinkage, Flow 0.020 - 0.030 cm/cm
0.020 - 0.030 in/in
Melt Flow 2.5 - 4.0 g/10 min

@Load 10.0 kg,
Temperature 230 °C
 2.5 - 4.0 g/10 min

@Load 22.0 lb,
Temperature 446 °F
 ASTM D1238
Mechanical Properties Metric English Comments
Hardness, Shore D 70

@Thickness 2.00 mm
 70

@Thickness 0.0787 in
 ASTM D2240
Tensile Strength at Break 34.0 - 40.0 MPa

@Thickness 2.00 mm,
Temperature 23.0 °C
 4930 - 5800 psi

@Thickness 0.0787 in,
Temperature 73.4 °F
 Type IV, 50 mm/min; ASTM D638
Tensile Strength, Yield 34.0 - 40.0 MPa

@Thickness 2.00 mm,
Temperature 23.0 °C
 4930 - 5800 psi

@Thickness 0.0787 in,
Temperature 73.4 °F
 Type IV, 50 mm/min; ASTM D638
Elongation at Break 100 - 300 %

@Thickness 2.00 mm,
Temperature 23.0 °C
 100 - 300 %

@Thickness 0.0787 in,
Temperature 73.4 °F
 Type IV, 50 mm/min; ASTM D638
Elongation at Yield 9.0 - 12 %

@Thickness 2.00 mm,
Temperature 23.0 °C
 9.0 - 12 %

@Thickness 0.0787 in,
Temperature 73.4 °F
 Type IV, 50 mm/min; ASTM D638
Tensile Modulus 1.25 - 1.40 GPa

@Thickness 2.00 mm,
Temperature 23.0 °C
 181 - 203 ksi

@Thickness 0.0787 in,
Temperature 73.4 °F
 Type IV, 1.0 mm/min; ASTM D638
Izod Impact, Notched 10.0 J/cm

@Thickness 4.00 mm,
Temperature 23.0 °C
 18.7 ft-lb/in

@Thickness 0.157 in,
Temperature 73.4 °F
 2 m/s, Partial Break; ASTM D6110
Coefficient of Friction, Dynamic 0.20 - 0.30
0.20 - 0.30
vs. Itself; ASTM D1894
Coefficient of Friction, Static 0.20 - 0.40
0.20 - 0.40
vs. Itself; ASTM D1894
Taber Abrasion, mg/1000 Cycles 5.0 - 10

@Load 1.00 kg
 5.0 - 10

@Load 2.20 lb
 CS-10 Wheel; ASTM D4060
Thermal Properties Metric English Comments
Heat of Fusion 41.0 - 50.0 J/g
17.6 - 21.5 BTU/lb
ASTM D3417
42.0 - 50.0 J/g
18.1 - 21.5 BTU/lb
Crystallization Heat; ASTM D3417
CTE, linear, Parallel to Flow 130 - 180 µm/m-°C

@Temperature 0.000 - 40.0 °C
 72.2 - 100 µin/in-°F

@Temperature 32.0 - 104 °F
 ASTM D696
Specific Heat Capacity 1.20 J/g-°C

@Temperature 23.0 °C
 0.287 BTU/lb-°F

@Temperature 73.4 °F
 ASTM E968
1.60 J/g-°C

@Temperature 100 °C
 0.382 BTU/lb-°F

@Temperature 212 °F
 ASTM E968
Thermal Conductivity 0.200 W/m-K

@Temperature 23.0 °C
 1.39 BTU-in/hr-ft²-°F

@Temperature 73.4 °F
 ASTM C177
Melting Point 170 - 174 °C
338 - 345 °F
ASTM D3418
Crystallization Temperature 142 - 146 °C
288 - 295 °F
Peak, DSC; ASTM D3418
Vicat Softening Point 167 °C
333 °F
Rate A (50°C/h), Loading 2 (50 N); ASTM D1525
Glass Transition Temp, Tg -40.0 °C
-40.0 °F
ASTM D4065
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+14 ohm-cm
>= 1.00e+14 ohm-cm
ASTM D257
Surface Resistance >= 1.00e+14 ohm
>= 1.00e+14 ohm
ASTM D257
Descriptive Properties Value Comments
Availability Africa & Middle East
Asia Pacific
Europe
North America
South America
Features Copolymer
High Viscosity
Generic PVDF
Uses Piping
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved