Solvay Specialty Polymers KetaSpire® KT-880 GF30 Polyetheretherketone (PEEK) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK) , Polyetheretherketone, PEEK, Glass Fiber Filled
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers KetaSpire® KT-880 GF30 Polyetheretherketone (PEEK) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

KetaSpire KT-880 GF30 is the high-flow, 30% glass-fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative to unreinforced KetaSpire PEEK resin. Reinforcement also affords greater mechanical robustness in structural applications, particularly those with service temperatures approaching 300°C. KetaSpire PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. - Beige: KT-880 GF30 BG 20Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.53 g/cc	1.53 g/cc	ASTM D792
Filler Content	30 %	30 %	Glass Fiber Reinforcement
Water Absorption	0.10 % @Time 86400 sec	0.10 % @Time 24.0 hour	ASTM D570
Viscosity	350000 cP @Shear Rate 1000 1/s, Temperature 400 °C	350000 cP @Shear Rate 1000 1/s, Temperature 752 °F	Melt; ASTM D3835
Linear Mold Shrinkage, Flow	0.0010 - 0.0030 cm/cm @Thickness 3.18 mm	0.0010 - 0.0030 in/in @Thickness 0.125 in	5" x 0.5" x 0.125"; ASTM D955
Linear Mold Shrinkage, Transverse	0.013 - 0.015 cm/cm @Thickness 3.18 mm	0.013 - 0.015 in/in @Thickness 0.125 in	5" x 0.5" x 0.125"; ASTM D955
Melt Flow	14 g/10 min @Load 2.16 kg, Temperature 400 °C	14 g/10 min @Load 4.76 lb, Temperature 752 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	105	105	M-Scale; ASTM D785
Tensile Strength	162 MPa	23500 psi	ASTM D638
Tensile Strength, Yield	174 MPa	25200 psi	ISO 527-2/1A/5
Elongation at Break	2.8 %	2.8 %	5.0 mm/min; Crystallized; ASTM D638
	2.8 %	2.8 %	ISO 527-2/1A/5
Tensile Modulus	10.8 GPa	1570 ksi	5.0 mm/min; ASTM D638
	11.2 GPa	1620 ksi	ISO 527-2/1A/1
Flexural Strength	239 MPa	34700 psi	ISO 178
	260 MPa	37700 psi	ASTM D790
Flexural Modulus	10.5 GPa	1520 ksi	ASTM D790
	10.6 GPa	1540 ksi	ISO 178
Compressive Strength	183 MPa	26500 psi	ASTM D695
Shear Strength	94.4 MPa	13700 psi	ASTM D732
Izod Impact, Notched	0.690 J/cm	1.29 ft-lb/in	ASTM D256
	8.50 J/cm	15.9 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	11.0 kJ/m²	5.23 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	62.0 kJ/m²	29.5 ft-lb/in²	ISO 180

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	19.0 µm/m-°C @Temperature -50.0 - 50.0 °C	10.6 µin/in-°F @Temperature -58.0 - 122 °F	TMA; ASTM E831
Specific Heat Capacity	1.28 J/g-°C @Temperature 50.0 °C	0.306 BTU/lb-°F @Temperature 122 °F	DSC
	1.70 J/g-°C @Temperature 200 °C	0.406 BTU/lb-°F @Temperature 392 °F	DSC
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F	ASTM E1530
Melting Point	343 °C	649 °F	Peak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	315 °C	599 °F	Annealed; ASTM D648
Glass Transition Temp, Tg	147 °C	297 °F	ASTM D3418
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in	UL 94
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	UL 94

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.80e+17 ohm-cm	3.80e+17 ohm-cm	ASTM D257
Surface Resistance	>= 1.90e+17 ohm	>= 1.90e+17 ohm	ASTM D257
Dielectric Constant	3.49 @Frequency 1.00e+6 Hz	3.49 @Frequency 1.00e+6 Hz	ASTM D150
	3.53 @Frequency 1000 Hz	3.53 @Frequency 1000 Hz	ASTM D150
	3.53 @Frequency 60.0 Hz	3.53 @Frequency 60.0 Hz	ASTM D150
Dielectric Strength	16.0 kV/mm @Thickness 3.00 mm	406 kV/in @Thickness 0.118 in	ASTM D149
Dissipation Factor	0.0020 @Frequency 1000 Hz	0.0020 @Frequency 1000 Hz	ASTM D150
	0.0020 @Frequency 60.0 Hz	0.0020 @Frequency 60.0 Hz	ASTM D150
	0.0040 @Frequency 1.00e+6 Hz	0.0040 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	365 °C	689 °F
Middle Barrel Temperature	371 °C	700 °F
Front Barrel Temperature	377 °C	711 °F
Nozzle Temperature	382 °C	720 °F
Mold Temperature	177 - 204 °C	351 - 399 °F
Drying Temperature	150 °C	302 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Agency Ratings	ISO 10993
	ISO 10993-Part 1
Appearance	Light Beige
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Autoclave Sterilizable
	Biocompatible
	E-beam Sterilizable
	Ethylene Oxide Sterilizable
	Fatigue Resistant
	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	Good Sterilizability
	Heat Sterilizable
	High Flow
	High Heat Resistance
	High Stiffness
	High Strength
	Radiation (Gamma) Resistant
	Radiation Sterilizable
	Radiotranslucent
	Steam Resistant
	Steam Sterilizable
Forms	Pellets
Generic	PEEK
Injection Rate	Fast
Processing Method	Injection Molding
	Machining
	Profile Extrusion
RoHS Compliance	RoHS Compliant
Screw Compression Ratio	2.5:1.0 to 3.5:1.0
Uses	Aircraft Applications
	Connectors
	Dental Applications
	Electrical/Electronic Applications
	Film
	Hospital Goods
	Industrial Applications
	Medical Appliances
	Medical/Healthcare Applications
	Oil/Gas Applications
	Pump Parts
	Seals
	Surgical Instruments

Users viewing this material also viewed the following: