- HOME
- POLYMER SEARCH
- Fluid
- Solvay Specialty Polymers Galden® HT170 PFPE Heat Transfer Fluid
Solvay Specialty Polymers Galden® HT170 PFPE Heat Transfer Fluid
| Category | Fluid , Polymer |
| Manufacturer | Solvay Specialty Polymers (former Solexis) |
| Trade Name | Galden® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Galden® HT170 PFPE Heat Transfer Fluid.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Galden® HT grades are specifically recommended for use as heat transfer fluids.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service temperature ranges, are available. Uses include heat transfer, electronic reliability testing, vapor phase soldering, solvents, and acid spill mitigation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.77 g/cc @Temperature 25.0 °C |
0.0639 lb/in³ @Temperature 77.0 °F |
|
| Solubility of Water | 0.0014 % | 0.0014 % | |
| Kinematic Viscosity | 1.8 cSt @Temperature 25.0 °C |
1.8 cSt @Temperature 77.0 °F |
|
| 3.41 cSt @Temperature 0.000 °C |
3.41 cSt @Temperature 32.0 °F |
||
| 7.11 cSt @Temperature -20.0 °C |
7.11 cSt @Temperature -4.00 °F |
||
| 21.14 cSt @Temperature -40.0 °C |
21.14 cSt @Temperature -40.0 °F |
||
| Molecular Weight | 760 g/mol | 760 g/mol | average |
| Vapor Pressure | 0.00107 bar @Temperature 25.0 °C |
0.800 torr @Temperature 77.0 °F |
|
| Surface Tension | 18 dynes/cm | 18 dynes/cm |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Heat of Vaporization | 66.9 J/g @Temperature 170 °C |
28.8 BTU/lb @Temperature 338 °F |
at boiling point |
| CTE, linear | 367 µm/m-°C | 204 µin/in-°F | converted from volumetric expansion of 0.0011 cm<sup>3</sup>/cm<sup>3</sup>-°C |
| Specific Heat Capacity | 0.960 J/g-°C | 0.229 BTU/lb-°F | |
| Thermal Conductivity | 0.0650 W/m-K | 0.451 BTU-in/hr-ft²-°F | |
| Boiling Point | 170 °C | 338 °F | |
| Maximum Service Temperature, Air | 170 °C | 338 °F | as heat transfer fluid |
| Minimum Service Temperature, Air | -35.0 °C | -31.0 °F | as heat transfer fluid |
| Pour Point | <= -97.0 °C | <= -143 °F |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.281 | 1.281 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.50e+15 ohm-cm | 1.50e+15 ohm-cm | |
| Dielectric Constant | 1.9 @Frequency 1000 Hz |
1.9 @Frequency 1000 Hz |
|
| Dielectric Strength | 15.7 kV/mm | 399 kV/in | 2.54 mm gap |
| Dissipation Factor | 0.00020 @Frequency 1000 Hz |
0.00020 @Frequency 1000 Hz |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Solubility of Air (cm³ gas / 100 cm³ liquid) | 26 |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Flexible R7543E Polyvinyl Chloride, Flexible (PVC, Flexible)
- Kazanorgsintez 162-280 Low Density Polyethylene Composition with Improved Processibility
- Materion Beryllium Copper Alloy 3 Forgings & Extrusions; A (TB00) Temper (UNS C17510)
- Latrobe Lescalloy® HP 9-4-30 VAC-ARC ; 5.75 in RCS Billet Size High Strength Alloy Steel
- Schmolz + Bickenbach UGIMA® 304 Cu Stainless Steel Bar
- CoorsTek AD-94 Alumina (nom. 94% Al2O3)
- ChevronTexaco Delo® 1000 Marine Engine Oil, SAE 40
- Akzo Nobel Expancel® 551 DU 20 Dry unexpanded microspheres
- Sylvin Technologies 60509 PVC Wire/Cable Compound
Copyright © lookpolymers.com All Rights Reserved