- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Molded
- Sibur 140-13 Compound 230/1 Polyvinyl Chloride (PVC)
Sibur 140-13 Compound 230/1 Polyvinyl Chloride (PVC)
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Molded |
| Manufacturer | Sibur |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sibur 140-13 Compound 230/1 Polyvinyl Chloride (PVC).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a period of 20 minutes. For insulation of wires and cables operating in intervals of temperatures from -40°C to 70°C.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.27 - 1.35 g/cc | 0.0459 - 0.0488 lb/in³ | |
| Water Absorption | <= 0.32 % | <= 0.32 % | |
| Collected Volatile Condensable Material | <= 2.0 % | <= 2.0 % | Loss in mass at 160°C during 6 hours |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | >= 17.6 MPa | >= 2550 psi | |
| Elongation at Break | >= 200 % | >= 200 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Softening Point | 170 - 190 °C | 338 - 374 °F | |
| Brittleness Temperature | <= -40.0 °C | <= -40.0 °F | |
| Flammability Test | <= 30 | <= 30 | In seconds, method A |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 2.00e+10 ohm-cm @Temperature 70.0 °C |
>= 2.00e+10 ohm-cm @Temperature 158 °F |
|
| >= 1.00e+13 ohm-cm @Temperature 20.0 °C |
>= 1.00e+13 ohm-cm @Temperature 68.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Non-colored | |
| Elongation Retained After Ageing | 75% | Aged for 7 days at 100±2°C |
| Number of Inclusions | <45 psc | With dimensions up to 0.5 mm |
Users viewing this material also viewed the following:
- Precision Polymer Engineering N70L Nitrile Rubber
- Network Polymers NPP 25-0202 C
- Premix Thermoplastics PREFLEX E25 Polyphenylene Ether (PPO/PPE)
- Lehmann & Voss LUVOCOM® 1105-8000 PEEK, with carbon fiber, lubricant modified
- Haynes 242® alloy, cold reduced sheet, annealed, 20% cold work
- SABIC Innovative Plastics XYLEX X8303CL PC+POLYESTER (Europe-Africa-Middle East)
- Plastic Lumber from the Plastic Lumber Co.
- ThyssenKrupp XABO® 500 T Structural Steel
- Elektro-Isola Etronit AS Phenolic, Paper Reinforcement, Black, Sheets
- ConocoPhillips ANDEROL® HTC Chain & Way Fluid, Synthetic Food Grade ISO 220
Copyright © lookpolymers.com All Rights Reserved