- HOME
- POLYMER SEARCH
- Ceramic
- Sharadaa Ceramics REFCAST SPL Dense Castables
Sharadaa Ceramics REFCAST SPL Dense Castables
| Category | Ceramic |
| Manufacturer | Sharadaa Ceramics |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sharadaa Ceramics REFCAST SPL Dense Castables.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rotary Kiln, Heat Curing and Acid Proof Lining Industry Focuses: Steel, Sponge, Rolling Mills, Coke Oven, Ferrous Foundries, Non-Ferrous, Cement, Petro Chemical, Mineral Processing, Sugar / Paper Mills and Chemical PlantsInformation provided by Sharadaa Ceramics Pvt. Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.10 g/cc | 0.0759 lb/in³ | |
| Grain Size | >= 5000 µm | >= 5000 µm |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 29.4 MPa @Temperature 1300 °C |
4270 psi @Temperature 2370 °F |
Cold Crushing |
| 39.2 MPa @Temperature 110 °C |
5690 psi @Temperature 230 °F |
Cold Crushing |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 1350 °C | 2460 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 45 % | 45 % | |
| Fe2O3 | 4.0 % | 4.0 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Permanent Linear Change | -1.0 - 1.0% | 1350°C |
Users viewing this material also viewed the following:
- Polimeri Europa SINKRAL B260 ABS, Heat Stabilized (discontinued **)
- Haynes Hastelloy® C-22® alloy, SMAW weld, C-22 base metal, C-22 weld metal
- SABIC Innovative Plastics LNP VERTON MV005SX0 PP (Europe-Africa-Middle East)
- UBE 5034T Nylon 6/66 Monofilament (Drawing Ratio=4.5)
- Total Lumicene® mPE M 2704 EP S01 Metallocene Polyethylene, Blown Film
- Dow Nordel® IP 3640 EPDM Hydrocarbon Rubber
- Denka REOMER G G3015 Thermoplastic Elastomer, For Extrusion
- 3M RPF-C (0.32 g/cc) (Reinforced Polyurethane Foam) Continuous Strand Fiberglass
- Solvay Specialty Polymers Amodel® DW-1150 Polyphthalamide (PPA) (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved