- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Saint-Gobain COHRlastic® 400 General Purpose Silicone Solid Rubber
Saint-Gobain COHRlastic® 400 General Purpose Silicone Solid Rubber
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone |
| Manufacturer | Saint-Gobain Perfomance Plastics |
| Trade Name | COHRlastic® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Saint-Gobain COHRlastic® 400 General Purpose Silicone Solid Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: COHRlastic® solid silicone rubber in square sheet and continuous length form has a smooth, blemish-free surface. It is available in degrees of hardness from relatively soft 30 durometer to the relatively hard 70 durometer on the Shore A scale. It is manufactured in different formulations to provide a choice of physical properties and cost considerations. Series 300-700: COHRlastic general-purpose molded sheet is available in thicknesses up to 1/2" and it withstands temperatures from -100°F to +500°F. RED in color.All data based on a 0.25 inch test sample.(Also comes in thicknesses from 1/16" to 1/2") Information provided by Saint Gobain Performance Products.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 35 - 45 | 35 - 45 | Increases by 5 after dry heat aging for 70 hrs at 437°F.; ASTM D2240 |
| Tensile Strength, Yield | 4.83 MPa | 700 psi | Tensile strength decreases by 15% after dry heat aging for 70 hrs at 437°F.; ASTM D412 |
| Elongation at Break | 400 % | 400 % | Elongation properties decrease by 15% after dry heat aging for 70 hrs at 437°F.; ASTM D412 |
| Tear Strength | 13.1 kN/m | 75.0 pli | Initial Tear Strength; ASTM D624 |
| Compression Set | 15 % @Temperature 160 °C |
15 % @Temperature 320 °F |
Constant Deflection, 70 hrs.; ASTM D395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 270 µm/m-°C @Temperature 20.0 °C |
150 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 1.26 J/g-°C | 0.300 BTU/lb-°F | |
| Thermal Conductivity | 0.187 W/m-K | 1.30 BTU-in/hr-ft²-°F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 19.7 kV/mm | 500 kV/in |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Red |
Users viewing this material also viewed the following:
- Pyrotek RFM Light density refractory composite material
- Raschig Group RALUPOL® 8602 UP
- Kennametal Stellite Stellite® 712 Cobalt Alloy
- Karina E 832-35/1-Y-ERA-LMP Ivory PVC Compound
- SABIC Innovative Plastics LNP LUBRICOMP UFL36AS PPA
- SABIC Innovative Plastics Xenoy® X4810 PBT+PC (Europe-Africa-Middle East)
- Schmolz + Bickenbach UGISTEAD UGI 204Cu Low Nickel Bar
- Teknor Apex Sinpolene MBB2691 Linear Low Density Polyethylene
- Teknor Apex APEX® 3202-60 Polyvinyl Chloride, Flexible
Copyright © lookpolymers.com All Rights Reserved