- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LLDPE
- Linear Low Density Polyethylene (LLDPE), Injection Molded
- SIDPEC EGYPTENE® LL 0550 AA LLDPE Injection Molding
SIDPEC EGYPTENE® LL 0550 AA LLDPE Injection Molding
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE), Injection Molded |
| Manufacturer | SIDPEC (Sidi Kerir Petrochemicals Co.) |
| Trade Name | EGYPTENE® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SIDPEC EGYPTENE® LL 0550 AA LLDPE Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications:House waresVery thin-walled food containersLidsInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (SIDPEC) Products
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.926 g/cc | 0.0335 lb/in³ | ISO 1872/1 |
| Melt Flow | 50 g/10 min @Load 2.16 kg |
50 g/10 min @Load 4.76 lb |
ISO 1133(4) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 13.0 MPa | 1890 psi | BP 13B/1 |
| Elongation at Break | 350 % | 350 % | BP 13B/1 |
| Flexural Modulus | 0.350 GPa | 50.8 ksi | ISO 178-1975 |
Users viewing this material also viewed the following:
- Kraton® D1155 E (SBS) Liner Block Copolymer
- Haynes Ultimet® alloy, aged 1000 hours at 538°C (1000°F)
- Glastic Laminates/Shapes SG-200 High Strength/High Temperature Polyester Laminate
- Sharadaa Ceramics 0.5 Insulation Brick
- Dow Tyrin® CM566 Chlorinated Polyethylene Elastomer
- BASF Ultramid® 8350 HS BK-102 PA6 (Dry)
- 3M Scotchlite™ 680-77 Reflective Graphic Film
- Axiall 16902 Wire & Cable Flexible PVC
- 3M FM239 Indoor UL Recognized Matte Clear Polyester Label Products
Copyright © lookpolymers.com All Rights Reserved