Ametek P304L P/M Stainless Steel, Sintered from 6.7 g/cc Green Density

Category	Metal , Ferrous Metal , Stainless Steel , T 300 Series Stainless Steel
Manufacturer	Ametek
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ametek P304L P/M Stainless Steel, Sintered from 6.7 g/cc Green Density.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Powder apparent bulk density 2.7 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearite. Sintering was done in dissociated ammonia at 1121°C (2050°F) for 45 minutes. Sintered properties below were determined using transverse rupture bars. Compacting pressure 50 tsi. Green strength 1120 psi. Sintered breaking strength 115 ksi. Dimensional change from die size -0.39%.Information provided by Ametek Specialty Metal Products.

Physical Properties	Metric	English	Comments
Density	6.80 g/cc	0.246 lb/in³

Mechanical Properties	Metric	English
Hardness, Rockwell B	68	68
Tensile Strength, Ultimate	390 MPa	56600 psi
Elongation at Break	5.4 %	5.4 %

Component Elements Properties	Metric	English	Comments
Carbon, C	<= 0.030 %	<= 0.030 %
Chromium, Cr	18 - 20 %	18 - 20 %
Iron, Fe	65 - 74 %	65 - 74 %	as balance
Manganese, Mn	<= 2.0 %	<= 2.0 %
Nickel, Ni	8.0 - 12 %	8.0 - 12 %
Phosphorous, P	<= 0.045 %	<= 0.045 %
Silicon, Si	<= 1.0 %	<= 1.0 %
Sulfur, S	<= 0.030 %	<= 0.030 %

Users viewing this material also viewed the following: