SABIC Innovative Plastics LNP LUBRILOY ZX06315 PPE+SEBS+Polyolefin (Asia Pacific)

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Styrene-Butadiene
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP Lubriloy
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRILOY ZX06315 PPE+SEBS+Polyolefin (Asia Pacific).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP* Lubriloy* ZX06315 is a compound based on PPE+PS Blend resin containing Flame Retardant, Proprietary Lubricant. Added features of this material include: Internally Lubricated, Non-Brominated & Non-Chlorinated Flame Retardant, Flame Retardant, high HDT.

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/inÂ³	ASTM D792
Linear Mold Shrinkage, Flow	0.0094 - 0.0096 cm/cm @Time 86400 sec	0.0094 - 0.0096 in/in @Time 24.0 hour	ASTM D955
Linear Mold Shrinkage, Transverse	0.0091 - 0.0093 cm/cm @Time 86400 sec	0.0091 - 0.0093 in/in @Time 24.0 hour	ASTM D955
Melt Index of Compound	38 g/10 min @Load 10.0 kg, Temperature 280 Â°C	38 g/10 min @Load 22.0 lb, Temperature 536 Â°F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	115	115	ASTM D785
Tensile Strength at Break	50.0 MPa	7250 psi	Type I, 50 mm/min; ASTM D638
Tensile Strength, Yield	63.0 MPa	9140 psi	Type I, 50 mm/min; ASTM D638
Elongation at Break	11.9 %	11.9 %	Type I, 50 mm/min; ASTM D638
Elongation at Yield	5.0 %	5.0 %	Type I, 50 mm/min; ASTM D638
Tensile Modulus	2.27 GPa	329 ksi	50 mm/min; ASTM D638
Flexural Strength	91.0 MPa	13200 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Yield Strength	93.0 MPa	13500 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	2.19 GPa	318 ksi	1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched	2.30 J/cm	4.31 ft-lb/in	ASTM D256
Coefficient of Friction, Dynamic	0.21	0.21	ASTM D3702 Modified
K (wear) Factor	131 x 10^-8 mmÂ³/N-M	65.0 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	720 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	400 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
Deflection Temperature at 1.8 MPa (264 psi)	124 Â°C @Thickness 3.20 mm	255 Â°F @Thickness 0.126 in	unannealed; ASTM D648
	129 Â°C @Thickness 6.40 mm	264 Â°F @Thickness 0.252 in	unannealed; ASTM D648
Flammability, UL94	V-1 @Thickness 1.50 mm	V-1 @Thickness 0.0591 in	UL 94 by SABIC-IP

Users viewing this material also viewed the following: