SABIC Innovative Plastics LNP LUBRICOMP SP003 PA 12

Category	Polymer , Thermoplastic , Nylon , Nylon 12
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP SP003 PA 12.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

LNP* LUBRICOMP* SP003 is a compound based on Nylon 12 resin containing 15% PTFE/Silicone. Added feature of this material is: Wear Resistant.

Physical Properties	Metric	English	Comments
Density	1.09 g/cc	0.0394 lb/inÂ³	ASTM D792
	1.09 g/cc	0.0394 lb/inÂ³	ISO 1183
Moisture Absorption	0.200 %	0.200 %	50% RH, 24 hrs; ASTM D570
Linear Mold Shrinkage, Flow	0.0090 - 0.011 cm/cm @Time 86400 sec	0.0090 - 0.011 in/in @Time 24.0 hour	ASTM D955
	0.010 cm/cm @Time 86400 sec	0.010 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.018 - 0.020 cm/cm @Time 86400 sec	0.018 - 0.020 in/in @Time 24.0 hour	ASTM D955
	0.019 cm/cm @Time 86400 sec	0.019 in/in @Time 24.0 hour	ISO 294

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	35.0 MPa	5080 psi	ASTM D638
	36.0 MPa	5220 psi	ISO 527
Tensile Strength, Yield	37.0 MPa	5370 psi	ASTM D638
	38.0 MPa	5510 psi	ISO 527
Elongation at Break	23.9 %	23.9 %	ASTM D638
	32.9 %	32.9 %	ISO 527
Elongation at Yield	17.5 %	17.5 %	ASTM D638
	18.4 %	18.4 %	ISO 527
Tensile Modulus	1.37 GPa	199 ksi	50 mm/min; ASTM D638
	1.58 GPa	229 ksi	1 mm/min; ISO 527
Flexural Strength	44.0 MPa	6380 psi	ISO 178
Flexural Modulus	1.30 GPa	189 ksi	ISO 178
	1.37 GPa	199 ksi	ASTM D790
Izod Impact, Notched	0.530 J/cm	0.993 ft-lb/in	ASTM D256
Izod Impact, Unnotched	6.83 J/cm	12.8 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	4.00 kJ/mÂ²	1.90 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	48.0 kJ/mÂ²	22.8 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	5.00 J	3.69 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Impact Test	7.00 J	5.16 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.23	0.23	ASTM D3702 Modified
Coefficient of Friction, Static	0.14	0.14	ASTM D3702 Modified
K (wear) Factor	26.2 x 10^-8 mmÂ³/N-M	13.0 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	112 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	62.2 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
	113 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	62.8 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
CTE, linear, Transverse to Flow	108 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	60.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	108 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	60.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	134 Â°C	273 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	150 Â°C @Thickness 3.20 mm	302 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	147 Â°C	297 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	146 Â°C @Thickness 3.20 mm	295 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: