SABIC Innovative Plastics LNP LUBRICOMP QAP22S PA6.10

Category	Polymer , Thermoplastic , Nylon , Nylon 610
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP QAP22S PA6.10.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP* LUBRICOMP* QAP22S is a compound based on Nylon 6/10 resin containing 10% PTFE/Silicone, 10% Aramid Fiber. Added features of this material include: Wear Resistant, Heat Stabilized.

Physical Properties	Metric	English	Comments
Density	1.17 g/cc	0.0423 lb/inÂ³	ASTM D792
	1.17 g/cc	0.0423 lb/inÂ³	ISO 1183
Moisture Absorption	0.300 %	0.300 %	50% RH, 24 hrs; ASTM D570
Linear Mold Shrinkage, Flow	0.010 cm/cm @Time 86400 sec	0.010 in/in @Time 24.0 hour	ASTM D955
	0.010 cm/cm @Time 86400 sec	0.010 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.018 cm/cm @Time 86400 sec	0.018 in/in @Time 24.0 hour	ASTM D955
	0.018 cm/cm @Time 86400 sec	0.018 in/in @Time 24.0 hour	ISO 294

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	45.0 MPa	6530 psi	ASTM D638
	50.0 MPa	7250 psi	ISO 527
Tensile Strength, Yield	45.0 MPa	6530 psi	ASTM D638
	50.0 MPa	7250 psi	ISO 527
Elongation at Break	1.8 %	1.8 %	ASTM D638
	2.3 %	2.3 %	ISO 527
Elongation at Yield	1.8 %	1.8 %	ASTM D638
	2.3 %	2.3 %	ISO 527
Tensile Modulus	3.31 GPa	480 ksi	1 mm/min; ISO 527
	3.44 GPa	499 ksi	50 mm/min; ASTM D638
Flexural Strength	76.0 MPa	11000 psi	ISO 178
	103 MPa	14900 psi	ASTM D790
Flexural Modulus	2.75 GPa	399 ksi	ASTM D790
	3.00 GPa	435 ksi	ISO 178
Izod Impact, Notched	0.370 J/cm	0.693 ft-lb/in	ASTM D256
Izod Impact, Unnotched	3.52 J/cm	6.59 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	4.00 kJ/mÂ²	1.90 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	32.0 kJ/mÂ²	15.2 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	1.00 J	0.738 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Impact Test	1.00 J	0.738 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.41	0.41	ASTM D3702 Modified
Coefficient of Friction, Static	0.26	0.26	ASTM D3702 Modified
K (wear) Factor	22.2 x 10^-8 mmÂ³/N-M	11.0 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	84.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	46.7 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
	84.6 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	47.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
CTE, linear, Transverse to Flow	63.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	35.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	63.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	35.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	193 Â°C	379 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	203 Â°C @Thickness 3.20 mm	397 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	94.0 Â°C	201 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	118 Â°C @Thickness 3.20 mm	244 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: