- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyamide-imide (PAI)
- Polyamide-Imide, Molded
- Quadrant EPP Duratron® PAI T4501 Polyamide-imide, compression molded bearing grade (ASTM Product Data Sheet)
Quadrant EPP Duratron® PAI T4501 Polyamide-imide, compression molded bearing grade (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyamide-imide (PAI) , Polyamide-Imide, Molded |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Duratron® PAI |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Duratron® PAI T4501 Polyamide-imide, compression molded bearing grade (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.45 g/cc | 1.45 g/cc | ASTM D792 |
| Water Absorption | 0.30 % | 0.30 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 1.5 % | 1.5 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell E | 70 | 70 | ASTM D785 |
| Hardness, Rockwell M | 106 | 106 | ASTM D785 |
| Hardness, Shore D | 90 | 90 | ASTM D2240 |
| Tensile Strength | 68.9 MPa | 10000 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
| Tensile Modulus | 3.03 GPa | 440 ksi | ASTM D638 |
| Flexural Strength | 138 MPa | 20000 psi | ASTM D790 |
| Flexural Modulus | 4.48 GPa | 650 ksi | ASTM D790 |
| Compressive Strength | 110 MPa | 16000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 2.48 GPa | 359 ksi | ASTM D695 |
| Izod Impact, Notched | 0.267 J/cm | 0.500 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.20 | 0.20 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 302 x 10-8 mm³/N-M | 150 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.788 MPa-m/sec | 22500 psi-ft/min | 4:1 safety factor; QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 36.0 µm/m-°C @Temperature -40.0 - 149 °C |
20.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.533 W/m-K | 3.70 BTU-in/hr-ft²-°F | ASTM F433 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 279 °C | 534 °F | ASTM D648 |
| Glass Transition Temp, Tg | 275 °C | 527 °F | ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 6.0 @Frequency 1e+6 Hz |
6.0 @Frequency 1e+6 Hz |
ASTM D150 |
| Dissipation Factor | 0.042 @Frequency 1e+6 Hz |
0.042 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 6 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- Polymax® Maxelast® C4830 TPE, Transparent
- DuPont Nucrel® 535 Ethylene-Methacrylic Acid Copolymer Resin (discontinued **)
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 2.0 PHR Di-Cup 40C Peroxide
- Unitika EX-1020K PA6, Conditioned
- ExxonMobil EXACT™ 8230 Plastomer for Polymer Modification
- EMS-Grivory Grivory® L 20 W 20 grey 9280 PA12
- Chosun Refractories SW83 Special High-Density Gunning Castable
- E-Polymers TEKAFIN® PH40FR Flame Retardant Heat Resistance Compounded-PP
- Aremco Ceramabond™ 571 High Temperature Ceramic Adhesive/Paste, Magnesium Oxide Filled
- Buckeye Polymers BP RPP 2009 GK BLK Polypropylene, 20% Glass Filled
Copyright © lookpolymers.com All Rights Reserved