- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene with 30% Glass Fiber Filler
- Polyram RamOfin PPH301G6NT Polypropylene, 30% Glass Fiber
Polyram RamOfin PPH301G6NT Polypropylene, 30% Glass Fiber
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 30% Glass Fiber Filler |
| Manufacturer | Polyram |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram RamOfin PPH301G6NT Polypropylene, 30% Glass Fiber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
30% Glass fiber reinforced polypropylene for injection molding applications. Approved and listed by WRAS Potable Water.Information provided by Polyram.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage | 0.0010 - 0.0040 cm/cm | 0.0010 - 0.0040 in/in | ISO 2577 |
| Melt Flow | 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
4.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 90.0 MPa | 13100 psi | ISO 527 |
| Elongation at Break | 3.0 % | 3.0 % | ISO 527 |
| Tensile Modulus | 6.00 GPa | 870 ksi | ISO 527 |
| Flexural Strength | 105 MPa | 15200 psi | ISO 178 |
| Flexural Modulus | 5.70 GPa | 827 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 12.5 kJ/m² | 5.95 ft-lb/in² | ISO 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 165 °C | 329 °F | ISO 11357 |
| Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous use |
| 140 °C | 284 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 153 °C | 307 °F | ISO 75 |
| Deflection Temperature at 1.8 MPa (264 psi) | 145 °C | 293 °F | ISO 75 |
| Flammability, UL94 | HB | HB | |
| Flame Spread | 9.0 mm/min | 0.35 in/min | FMVSS302 |
Users viewing this material also viewed the following:
- RedEye On Demand Polyphenylsulfone (PPSF), Rapid Prototyping Material
- Lubriplate Flokool XX Cutting Oil Metal Working Fluid
- SABIC Innovative Plastics LNP Stat-kon WX98547 PBT
- ChevronTexaco A Jet Fuel
- CP-Polymer-Technik Wellamid® 6000 GX 350 HWCP Combination Nylon 6, Heat Stabilized, Dry
- DuPont Teijin Films Mylar® 834 Polyester Film, 48 Gauge
- E-Polymers TEKAMID® TA210ST Super Tough PA66, DAM
- A. Schulman ComAlloy Hiloy® 614 Nylon 6, Glass Reinforced
- Solvay Specialty Polymers Solef® 21510 Polyvinylidene Fluoride (PVDF) (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved