- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, Unreinforced
- Polyram PlusTek RB145 Nylon 6, General Purpose
Polyram PlusTek RB145 Nylon 6, General Purpose
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek RB145 Nylon 6, General Purpose.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
General purpose polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.12 g/cc | 0.0405 lb/in³ | DIN 53479 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ASTM-D638 |
| Elongation at Break | 85 % | 85 % | ASTM-D638 |
| Tensile Modulus | 2.465 GPa | 357.5 ksi | ASTM-D790 |
| Flexural Strength | 90.0 MPa | 13100 psi | ASTM D790 |
| Flexural Modulus | 2.00 GPa | 290 ksi | ASTM-D790 |
| Izod Impact, Notched | 0.700 J/cm @Temperature 23.0 °C |
1.31 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 218 °C | 424 °F |
Users viewing this material also viewed the following:
- MV Labs MN700 Mn(NO3)2·4H2O Manganese(II) nitrate hydrate
- Ravago Manufacturing Americas Hybrid B2025IU Polycarbonate + PBT Alloy
- Flint Hills P9M7R-056 Specialty Homopolymer Polypropylene
- SCG Chemicals EL-Leneâ„¢ LD1902F Low Density Polyethylene Film
- Arlon 30400N125 0.125" (3.17 mm) Uncured, Unsupported Silicone Rubber on a Kodacel Carrier
- PolyOne Synprene® IT38-004M Thermoplastic Elastomer - SBC (discontinued **)
- Asahi Glass Fluon® G190 PTFE Granular Powder
Copyright © lookpolymers.com All Rights Reserved